linux-toradex.git/arch, branch v3.8-rc6 Linux kernel for Apalis and Colibri modules Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus 2013-01-31T21:43:04+00:00 Linus Torvalds torvalds@linux-foundation.org 2013-01-31T21:43:04+00:00 aeb8eede8ef5e22a2e7658c3f4e0629b4e5c1265 Pull MIPS updates from Ralf Baechle: "A number of fixes all across the MIPS tree. No area is particularly standing out and things have cooled down quite nicely for a release." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Function tracer: Fix broken function tracing mips: Move __virt_addr_valid() to a place for MIPS 64 MIPS: Netlogic: Fix UP compilation on XLR MIPS: AR71xx: Fix AR71XX_PCI_MEM_SIZE MIPS: AR724x: Fix AR724X_PCI_MEM_SIZE MIPS: Lantiq: Fix cp0_perfcount_irq mapping MIPS: DSP: Fix DSP mask for registers. MIPS: Fix build failure by adding definition of pfn_pmd(). MIPS: Octeon: Fix warning. MIPS: delay.c: Check BITS_PER_LONG instead of __SIZEOF_LONG__ MIPS: PNX833x: Fix comment. MIPS: Add struct p_format to union mips_instruction. MIPS: Export <asm/break.h>. MIPS: BCM47xx: Enable SSB prerequisite SSB_DRIVER_PCICORE. MIPS: BCM47xx: Select GPIOLIB for BCMA on bcm47xx platform MIPS: vpe.c: Fix null pointer dereference in print arguments. 
Pull MIPS updates from Ralf Baechle:
 "A number of fixes all across the MIPS tree.  No area is particularly
  standing out and things have cooled down quite nicely for a release."

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: Function tracer: Fix broken function tracing
  mips: Move __virt_addr_valid() to a place for MIPS 64
  MIPS: Netlogic: Fix UP compilation on XLR
  MIPS: AR71xx: Fix AR71XX_PCI_MEM_SIZE
  MIPS: AR724x: Fix AR724X_PCI_MEM_SIZE
  MIPS: Lantiq: Fix cp0_perfcount_irq mapping
  MIPS: DSP: Fix DSP mask for registers.
  MIPS: Fix build failure by adding definition of pfn_pmd().
  MIPS: Octeon: Fix warning.
  MIPS: delay.c: Check BITS_PER_LONG instead of __SIZEOF_LONG__
  MIPS: PNX833x: Fix comment.
  MIPS: Add struct p_format to union mips_instruction.
  MIPS: Export <asm/break.h>.
  MIPS: BCM47xx: Enable SSB prerequisite SSB_DRIVER_PCICORE.
  MIPS: BCM47xx: Select GPIOLIB for BCMA on bcm47xx platform
  MIPS: vpe.c: Fix null pointer dereference in print arguments.
MIPS: Function tracer: Fix broken function tracing 2013-01-31T14:28:48+00:00 Al Cooper alcooperx@gmail.com 2013-01-16T22:43:28+00:00 58b69401c797e470c8f638c598dddc44a4ce8a96 Function tracing is currently broken for all 32 bit MIPS platforms. When tracing is enabled, the kernel immediately hangs on boot. This is a result of commit b732d439cb43336cd6d7e804ecb2c81193ef63b0 that changes the kernel/trace/Kconfig file so that is no longer forces FRAME_POINTER when FUNCTION_TRACING is enabled. MIPS frame pointers are generally considered to be useless because they cannot be used to unwind the stack. Unfortunately the MIPS function tracing code has bugs that are masked by the use of frame pointers. This commit fixes the bugs so that MIPS frame pointers don't need to be enabled. The bugs are a result of the odd calling sequence used to call the trace routine. This calling sequence is inserted into every traceable function when the tracing CONFIG option is enabled. This sequence is generated for 32bit MIPS platforms by the compiler via the "-pg" flag. Part of the sequence is "addiu sp,sp,-8" in the delay slot after every call to the trace routine "_mcount" (some legacy thing where 2 arguments used to be pushed on the stack). The _mcount routine is expected to adjust the sp by +8 before returning. So when not disabled, the original jalr and addiu will be there, so _mcount has to adjust sp. The problem is that when tracing is disabled for a function, the "jalr _mcount" instruction is replaced with a nop, but the "addiu sp,sp,-8" is still executed and the stack pointer is left trashed. When frame pointers are enabled the problem is masked because any access to the stack is done through the frame pointer and the stack pointer is restored from the frame pointer when the function returns. This patch writes two nops starting at the address of the "jalr _mcount" instruction whenever tracing is disabled. This means that the "addiu sp,sp.-8" will be converted to a nop along with the "jalr". When disabled, there will be two nops. This is SMP safe because the first time this happens is during ftrace_init() which is before any other processor has been started. Subsequent calls to enable/disable tracing when other CPUs ARE running will still be safe because the enable will only change the first nop to a "jalr" and the disable, while writing 2 nops, will only be changing the "jalr". This patch also stops using stop_machine() to call the tracer enable/disable routines and calls them directly because the routines are SMP safe. When the kernel first boots we have to be able to handle the gcc generated jalr, addui sequence until ftrace_init gets a chance to run and change the sequence. At this point mcount just adjusts the stack and returns. When ftrace_init runs, we convert the jalr/addui to nops. Then whenever tracing is enabled we convert the first nop to a "jalr mcount+8". The mcount+8 entry point skips the stack adjust. [ralf@linux-mips.org: Folded in Steven Rostedt's build fix.] Signed-off-by: Al Cooper <alcooperx@gmail.com> Cc: rostedt@goodmis.org Cc: ddaney.cavm@gmail.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/4806/ Patchwork: https://patchwork.linux-mips.org/patch/4841/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 
Function tracing is currently broken for all 32 bit MIPS platforms.
When tracing is enabled, the kernel immediately hangs on boot.
This is a result of commit b732d439cb43336cd6d7e804ecb2c81193ef63b0
that changes the kernel/trace/Kconfig file so that is no longer
forces FRAME_POINTER when FUNCTION_TRACING is enabled.

MIPS frame pointers are generally considered to be useless because
they cannot be used to unwind the stack. Unfortunately the MIPS
function tracing code has bugs that are masked by the use of frame
pointers. This commit fixes the bugs so that MIPS frame pointers
don't need to be enabled.

The bugs are a result of the odd calling sequence used to call the trace
routine. This calling sequence is inserted into every traceable function
when the tracing CONFIG option is enabled. This sequence is generated
for 32bit MIPS platforms by the compiler via the "-pg" flag.

Part of the sequence is "addiu sp,sp,-8" in the delay slot after every
call to the trace routine "_mcount" (some legacy thing where 2 arguments
used to be pushed on the stack). The _mcount routine is expected to
adjust the sp by +8 before returning.  So when not disabled, the original
jalr and addiu will be there, so _mcount has to adjust sp.

The problem is that when tracing is disabled for a function, the
"jalr _mcount" instruction is replaced with a nop, but the
"addiu sp,sp,-8" is still executed and the stack pointer is left
trashed. When frame pointers are enabled the problem is masked
because any access to the stack is done through the frame
pointer and the stack pointer is restored from the frame pointer when
the function returns.

This patch writes two nops starting at the address of the "jalr _mcount"
instruction whenever tracing is disabled. This means that the
"addiu sp,sp.-8" will be converted to a nop along with the "jalr".  When
disabled, there will be two nops.

This is SMP safe because the first time this happens is during
ftrace_init() which is before any other processor has been started.
Subsequent calls to enable/disable tracing when other CPUs ARE running
will still be safe because the enable will only change the first nop
to a "jalr" and the disable, while writing 2 nops, will only be changing
the "jalr". This patch also stops using stop_machine() to call the
tracer enable/disable routines and calls them directly because the
routines are SMP safe.

When the kernel first boots we have to be able to handle the gcc
generated jalr, addui sequence until ftrace_init gets a chance to run
and change the sequence. At this point mcount just adjusts the stack
and returns. When ftrace_init runs, we convert the jalr/addui to nops.
Then whenever tracing is enabled we convert the first nop to a "jalr
mcount+8". The mcount+8 entry point skips the stack adjust.

[ralf@linux-mips.org: Folded in  Steven Rostedt's build fix.]

Signed-off-by: Al Cooper <alcooperx@gmail.com>
Cc: rostedt@goodmis.org
Cc: ddaney.cavm@gmail.com
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/4806/
Patchwork: https://patchwork.linux-mips.org/patch/4841/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
mips: Move __virt_addr_valid() to a place for MIPS 64 2013-01-31T14:14:59+00:00 Steven Rostedt rostedt@goodmis.org 2013-01-25T17:13:15+00:00 196897a2979498d19edbdf5b4af02261afbc1a96 Commit d3ce88431892 "MIPS: Fix modpost error in modules attepting to use virt_addr_valid()" moved __virt_addr_valid() from a macro in a header file to a function in ioremap.c. But ioremap.c is only compiled for MIPS 32, and not for MIPS 64. When compiling for my yeeloong2, which supposedly supports hibernation, which compiles kernel/power/snapshot.c which calls virt_addr_valid(), I got this error: LD init/built-in.o kernel/built-in.o: In function `memory_bm_free': snapshot.c:(.text+0x4c9c4): undefined reference to `__virt_addr_valid' snapshot.c:(.text+0x4ca58): undefined reference to `__virt_addr_valid' kernel/built-in.o: In function `snapshot_write_next': (.text+0x4e44c): undefined reference to `__virt_addr_valid' kernel/built-in.o: In function `snapshot_write_next': (.text+0x4e890): undefined reference to `__virt_addr_valid' make[1]: *** [vmlinux] Error 1 make: *** [sub-make] Error 2 I suspect that __virt_addr_valid() is fine for mips 64. I moved it to mmap.c such that it gets compiled for mips 64 and 32. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4842/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 
Commit d3ce88431892 "MIPS: Fix modpost error in modules attepting to use
virt_addr_valid()" moved __virt_addr_valid() from a macro in a header
file to a function in ioremap.c. But ioremap.c is only compiled for MIPS
32, and not for MIPS 64.

When compiling for my yeeloong2, which supposedly supports hibernation,
which compiles kernel/power/snapshot.c which calls virt_addr_valid(), I
got this error:

  LD      init/built-in.o
kernel/built-in.o: In function `memory_bm_free':
snapshot.c:(.text+0x4c9c4): undefined reference to `__virt_addr_valid'
snapshot.c:(.text+0x4ca58): undefined reference to `__virt_addr_valid'
kernel/built-in.o: In function `snapshot_write_next':
(.text+0x4e44c): undefined reference to `__virt_addr_valid'
kernel/built-in.o: In function `snapshot_write_next':
(.text+0x4e890): undefined reference to `__virt_addr_valid'
make[1]: *** [vmlinux] Error 1
make: *** [sub-make] Error 2

I suspect that __virt_addr_valid() is fine for mips 64. I moved it to
mmap.c such that it gets compiled for mips 64 and 32.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/4842/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Merge branch 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2013-01-31T06:10:36+00:00 Linus Torvalds torvalds@linux-foundation.org 2013-01-31T06:10:36+00:00 04c2eee5b9dfcb13f3cd07a5537fb8c785f2751a Pull x86 EFI fixes from Peter Anvin: "This is a collection of fixes for the EFI support. The controversial bit here is a set of patches which bumps the boot protocol version as part of fixing some serious problems with the EFI handover protocol, used when booting under EFI using a bootloader as opposed to directly from EFI. These changes should also make it a lot saner to support cross-mode 32/64-bit EFI booting in the future. Getting these changes into 3.8 means we avoid presenting an inconsistent ABI to bootloaders. Other changes are display detection and fixing efivarfs." * 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, efi: remove attribute check from setup_efi_pci x86, build: Dynamically find entry points in compressed startup code x86, efi: Fix PCI ROM handing in EFI boot stub, in 32-bit mode x86, efi: Fix 32-bit EFI handover protocol entry point x86, efi: Fix display detection in EFI boot stub x86, boot: Define the 2.12 bzImage boot protocol x86/boot: Fix minor fd leakage in tools/relocs.c x86, efi: Set runtime_version to the EFI spec revision x86, efi: fix 32-bit warnings in setup_efi_pci() efivarfs: Delete dentry from dcache in efivarfs_file_write() efivarfs: Never return ENOENT from firmware efi, x86: Pass a proper identity mapping in efi_call_phys_prelog efivarfs: Drop link count of the right inode 
Pull x86 EFI fixes from Peter Anvin:
 "This is a collection of fixes for the EFI support.  The controversial
  bit here is a set of patches which bumps the boot protocol version as
  part of fixing some serious problems with the EFI handover protocol,
  used when booting under EFI using a bootloader as opposed to directly
  from EFI.  These changes should also make it a lot saner to support
  cross-mode 32/64-bit EFI booting in the future.  Getting these changes
  into 3.8 means we avoid presenting an inconsistent ABI to bootloaders.

  Other changes are display detection and fixing efivarfs."

* 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, efi: remove attribute check from setup_efi_pci
  x86, build: Dynamically find entry points in compressed startup code
  x86, efi: Fix PCI ROM handing in EFI boot stub, in 32-bit mode
  x86, efi: Fix 32-bit EFI handover protocol entry point
  x86, efi: Fix display detection in EFI boot stub
  x86, boot: Define the 2.12 bzImage boot protocol
  x86/boot: Fix minor fd leakage in tools/relocs.c
  x86, efi: Set runtime_version to the EFI spec revision
  x86, efi: fix 32-bit warnings in setup_efi_pci()
  efivarfs: Delete dentry from dcache in efivarfs_file_write()
  efivarfs: Never return ENOENT from firmware
  efi, x86: Pass a proper identity mapping in efi_call_phys_prelog
  efivarfs: Drop link count of the right inode
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2013-01-31T06:08:43+00:00 Linus Torvalds torvalds@linux-foundation.org 2013-01-31T06:08:43+00:00 bdb0ae6a767ef2622eb282e06fc225e855341653 Pull x86 fixes from Peter Anvin: "This is a collection of miscellaneous fixes, the most important one is the fix for the Samsung laptop bricking issue (auto-blacklisting the samsung-laptop driver); the efi_enabled() changes you see below are prerequisites for that fix. The other issues fixed are booting on OLPC XO-1.5, an UV fix, NMI debugging, and requiring CAP_SYS_RAWIO for MSR references, just as with I/O port references." * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: samsung-laptop: Disable on EFI hardware efi: Make 'efi_enabled' a function to query EFI facilities smp: Fix SMP function call empty cpu mask race x86/msr: Add capabilities check x86/dma-debug: Bump PREALLOC_DMA_DEBUG_ENTRIES x86/olpc: Fix olpc-xo1-sci.c build errors arch/x86/platform/uv: Fix incorrect tlb flush all issue x86-64: Fix unwind annotations in recent NMI changes x86-32: Start out cr0 clean, disable paging before modifying cr3/4 
Pull x86 fixes from Peter Anvin:
 "This is a collection of miscellaneous fixes, the most important one is
  the fix for the Samsung laptop bricking issue (auto-blacklisting the
  samsung-laptop driver); the efi_enabled() changes you see below are
  prerequisites for that fix.

  The other issues fixed are booting on OLPC XO-1.5, an UV fix, NMI
  debugging, and requiring CAP_SYS_RAWIO for MSR references, just as
  with I/O port references."

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  samsung-laptop: Disable on EFI hardware
  efi: Make 'efi_enabled' a function to query EFI facilities
  smp: Fix SMP function call empty cpu mask race
  x86/msr: Add capabilities check
  x86/dma-debug: Bump PREALLOC_DMA_DEBUG_ENTRIES
  x86/olpc: Fix olpc-xo1-sci.c build errors
  arch/x86/platform/uv: Fix incorrect tlb flush all issue
  x86-64: Fix unwind annotations in recent NMI changes
  x86-32: Start out cr0 clean, disable paging before modifying cr3/4
Merge tag 'efi-for-3.8' into x86/efi 2013-01-30T22:43:05+00:00 H. Peter Anvin hpa@linux.intel.com 2013-01-30T22:43:05+00:00 becbd6608026c15afd88fd3d0c893dfb7b8c7845 Various urgent EFI fixes and some warning cleanups for v3.8 * EFI boot stub fix for Macbook Pro's from Maarten Lankhorst * Fix an oops in efivarfs from Lingzhu Xiang * 32-bit warning cleanups from Jan Beulich * Patch to Boot on >512GB RAM systems from Nathan Zimmer * Set efi.runtime_version correctly * efivarfs updates Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> 
Various urgent EFI fixes and some warning cleanups for v3.8

  * EFI boot stub fix for Macbook Pro's from Maarten Lankhorst
  * Fix an oops in efivarfs from Lingzhu Xiang
  * 32-bit warning cleanups from Jan Beulich
  * Patch to Boot on >512GB RAM systems from Nathan Zimmer
  * Set efi.runtime_version correctly
  * efivarfs updates

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
MIPS: Netlogic: Fix UP compilation on XLR 2013-01-30T20:44:18+00:00 Jayachandran C jchandra@broadcom.com 2013-01-07T13:21:08+00:00 26f5ae865d7b324e46fff91acf43c485939bf6ea The commit 2a37b1a "MIPS: Netlogic: Move from u32 cpumask to cpumask_t" breaks uniprocessor compilation on XLR with: arch/mips/netlogic/xlr/setup.c: In function 'prom_init': arch/mips/netlogic/xlr/setup.c:196:6: error: unused variable 'i' Fix by defining 'i' only when CONFIG_SMP is defined. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4760/ Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 
The commit 2a37b1a "MIPS: Netlogic: Move from u32 cpumask to cpumask_t"
breaks uniprocessor compilation on XLR with:

arch/mips/netlogic/xlr/setup.c: In function 'prom_init':
arch/mips/netlogic/xlr/setup.c:196:6: error: unused variable 'i'

Fix by defining 'i' only when CONFIG_SMP is defined.

Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Patchwork: http://patchwork.linux-mips.org/patch/4760/
Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
MIPS: AR71xx: Fix AR71XX_PCI_MEM_SIZE 2013-01-30T20:43:11+00:00 Gabor Juhos juhosg@openwrt.org 2013-01-29T08:27:04+00:00 fe950df70013a9f3368918aab697eec15f80ac67 The base address of the PCI memory is 0x10000000 and the base address of the PCI configuration space is 0x17000000 on the AR71xx SoCs. The AR71XX_PCI_MEM_SIZE is defined as 0x08000000 which is wrong because that overlaps with the configuration space. This patch fixes the value of the AR71XX_PCI_MEM_SIZE constant, in order to avoid this resource conflicts. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4873/ Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 
The base address of the PCI memory is 0x10000000 and the base address of the
PCI configuration space is 0x17000000 on the AR71xx SoCs.

The AR71XX_PCI_MEM_SIZE is defined as 0x08000000 which is wrong because that
overlaps with the configuration space.  This patch fixes the value of the
AR71XX_PCI_MEM_SIZE constant, in order to avoid this resource conflicts.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/4873/
Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
MIPS: AR724x: Fix AR724X_PCI_MEM_SIZE 2013-01-30T20:42:41+00:00 Gabor Juhos juhosg@openwrt.org 2013-01-29T08:27:03+00:00 4c960910e2fb3a301ee4a504fa6b2c5204efeab0 The base address of the PCI memory is 0x10000000 and the base address of the PCI configuration space is 0x14000000 on the AR724x SoCs. The AR724X_PCI_MEM_SIZE is defined as 0x08000000 which is wrong because that overlaps with the configuration space. The patch fixes the value of the AR724X_PCI_MEM_SIZE constant, in order to avoid this resource conflicts. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4872/ Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 
The base address of the PCI memory is
0x10000000 and the base address of the
PCI configuration space is 0x14000000
on the AR724x SoCs.

The AR724X_PCI_MEM_SIZE is defined as
0x08000000 which is wrong because that
overlaps  with the configuration space.

The patch fixes the value of the
AR724X_PCI_MEM_SIZE constant, in order
to avoid this resource conflicts.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/4872/
Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
MIPS: Lantiq: Fix cp0_perfcount_irq mapping 2013-01-30T20:28:28+00:00 John Crispin blogic@openwrt.org 2013-01-29T18:46:02+00:00 79d61a046bf02a3eff9da15e607ac35c172de3a7 The introduction of the OF support broke the cp0_perfcount_irq mapping. This resulted in oprofile not working anymore. Offending commit is : commit 3645da0276ae9f6938ff29b13904b803ecb68424 Author: John Crispin <blogic@openwrt.org> Date: Tue Apr 17 10:18:32 2012 +0200 OF: MIPS: lantiq: implement irq_domain support Signed-off-by: Conor O'Gorman <i@conorogorman.net> Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4875/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 
The introduction of the OF support broke the cp0_perfcount_irq mapping. This
resulted in oprofile not working anymore.

Offending commit is :

commit 3645da0276ae9f6938ff29b13904b803ecb68424
Author: John Crispin <blogic@openwrt.org>
Date:   Tue Apr 17 10:18:32 2012 +0200

OF: MIPS: lantiq: implement irq_domain support

Signed-off-by: Conor O'Gorman <i@conorogorman.net>
Signed-off-by: John Crispin <blogic@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/4875/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>