linux-toradex.git/arch, branch v4.9.66

s390/kbuild: enable modversions for symbols exported from asm

2017-11-30T08:39:14+00:00

[ Upstream commit cabab3f9f5ca077535080b3252e6168935b914af ]

s390 version of commit 334bb7738764 ("x86/kbuild: enable modversions
for symbols exported from asm") so we get also rid of all these
warnings:

WARNING: EXPORT symbol "_mcount" [vmlinux] version generation failed, symbol will not be versioned.
WARNING: EXPORT symbol "memcpy" [vmlinux] version generation failed, symbol will not be versioned.
WARNING: EXPORT symbol "memmove" [vmlinux] version generation failed, symbol will not be versioned.
WARNING: EXPORT symbol "memset" [vmlinux] version generation failed, symbol will not be versioned.
WARNING: EXPORT symbol "save_fpu_regs" [vmlinux] version generation failed, symbol will not be versioned.
WARNING: EXPORT symbol "sie64a" [vmlinux] version generation failed, symbol will not be versioned.
WARNING: EXPORT symbol "sie_exit" [vmlinux] version generation failed, symbol will not be versioned.

Signed-off-by: Heiko Carstens 
Signed-off-by: Martin Schwidefsky 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

powerpc/signal: Properly handle return value from uprobe_deny_signal()

2017-11-30T08:39:08+00:00

commit 46725b17f1c6c815a41429259b3f070c01e71bc1 upstream.

When a uprobe is installed on an instruction that we currently do not
emulate, we copy the instruction into a xol buffer and single step
that instruction. If that instruction generates a fault, we abort the
single stepping before invoking the signal handler. Once the signal
handler is done, the uprobe trap is hit again since the instruction is
retried and the process repeats.

We use uprobe_deny_signal() to detect if the xol instruction triggered
a signal. If so, we clear TIF_SIGPENDING and set TIF_UPROBE so that the
signal is not handled until after the single stepping is aborted. In
this case, uprobe_deny_signal() returns true and get_signal() ends up
returning 0. However, in do_signal(), we are not looking at the return
value, but depending on ksig.sig for further action, all with an
uninitialized ksig that is not touched in this scenario. Fix the same
by initializing ksig.sig to 0.

Fixes: 129b69df9c90 ("powerpc: Use get_signal() signal_setup_done()")
Reported-by: Anton Blanchard 
Signed-off-by: Naveen N. Rao 
Signed-off-by: Michael Ellerman 
Signed-off-by: Greg Kroah-Hartman

parisc: Fix validity check of pointer size argument in new CAS implementation

2017-11-30T08:39:08+00:00

commit 05f016d2ca7a4fab99d5d5472168506ddf95e74f upstream.

As noted by Christoph Biedl, passing a pointer size of 4 in the new CAS
implementation causes a kernel crash.  The attached patch corrects the
off by one error in the argument validity check.

In reviewing the code, I noticed that we only perform word operations
with the pointer size argument.  The subi instruction intentionally uses
a word condition on 64-bit kernels.  Nullification was used instead of a
cmpib instruction as the branch should never be taken.  The shlw
pseudo-operation generates a depw,z instruction and it clears the target
before doing a shift left word deposit.  Thus, we don't need to clip the
upper 32 bits of this argument on 64-bit kernels.

Tested with a gcc testsuite run with a 64-bit kernel.  The gcc atomic
code in libgcc is the only direct user of the new CAS implementation
that I am aware of.

Signed-off-by: John David Anglin 
Signed-off-by: Helge Deller 
Signed-off-by: Greg Kroah-Hartman

KVM: SVM: obey guest PAT

2017-11-30T08:39:07+00:00

commit 15038e14724799b8c205beb5f20f9e54896013c3 upstream.

For many years some users of assigned devices have reported worse
performance on AMD processors with NPT than on AMD without NPT,
Intel or bare metal.

The reason turned out to be that SVM is discarding the guest PAT
setting and uses the default (PA0=PA4=WB, PA1=PA5=WT, PA2=PA6=UC-,
PA3=UC).  The guest might be using a different setting, and
especially might want write combining but isn't getting it
(instead getting slow UC or UC- accesses).

Thanks a lot to geoff@hostfission.com for noticing the relation
to the g_pat setting.  The patch has been tested also by a bunch
of people on VFIO users forums.

Fixes: 709ddebf81cb40e3c36c6109a7892e8b93a09464
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=196409
Signed-off-by: Paolo Bonzini 
Reviewed-by: David Hildenbrand 
Tested-by: Nick Sarnie 
Signed-off-by: Radim Krčmář 
Signed-off-by: Greg Kroah-Hartman

KVM: nVMX: set IDTR and GDTR limits when loading L1 host state

2017-11-30T08:39:06+00:00

commit 21f2d551183847bc7fbe8d866151d00cdad18752 upstream.

Intel SDM 27.5.2 Loading Host Segment and Descriptor-Table Registers:

"The GDTR and IDTR limits are each set to FFFFH."

Signed-off-by: Ladi Prosek 
Signed-off-by: Paolo Bonzini 
Signed-off-by: Greg Kroah-Hartman

MIPS: BCM47XX: Fix LED inversion for WRT54GSv1

2017-11-30T08:39:03+00:00

commit 56a46acf62af5ba44fca2f3f1c7c25a2d5385b19 upstream.

The WLAN LED on the Linksys WRT54GSv1 is active low, but the software
treats it as active high. Fix the inverted logic.

Fixes: 7bb26b169116 ("MIPS: BCM47xx: Fix LEDs on WRT54GS V1.0")
Signed-off-by: Mirko Parthey 
Looks-ok-by: Rafał Miłecki 
Cc: Hauke Mehrtens 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16071/
Signed-off-by: James Hogan 
Signed-off-by: Greg Kroah-Hartman

MIPS: Fix an n32 core file generation regset support regression

2017-11-30T08:39:03+00:00

commit 547da673173de51f73887377eb275304775064ad upstream.

Fix a commit 7aeb753b5353 ("MIPS: Implement task_user_regset_view.")
regression, then activated by commit 6a9c001b7ec3 ("MIPS: Switch ELF
core dumper to use regsets.)", that caused n32 processes to dump o32
core files by failing to set the EF_MIPS_ABI2 flag in the ELF core file
header's `e_flags' member:

$ file tls-core
tls-core: ELF 32-bit MSB executable, MIPS, N32 MIPS64 rel2 version 1 (SYSV), [...]
$ ./tls-core
Aborted (core dumped)
$ file core
core: ELF 32-bit MSB core file MIPS, MIPS-I version 1 (SYSV), SVR4-style
$

Previously the flag was set as the result of a:

statement placed in arch/mips/kernel/binfmt_elfn32.c, however in the
regset case, i.e. when CORE_DUMP_USE_REGSET is set, ELF_CORE_EFLAGS is
no longer used by `fill_note_info' in fs/binfmt_elf.c, and instead the
`->e_flags' member of the regset view chosen is.  We have the views
defined in arch/mips/kernel/ptrace.c, however only an o32 and an n64
one, and the latter is used for n32 as well.  Consequently an o32 core
file is incorrectly dumped from n32 processes (the ELF32 vs ELF64 class
is chosen elsewhere, and the 32-bit one is correctly selected for n32).

Correct the issue then by defining an n32 regset view and using it as
appropriate.  Issue discovered in GDB testing.

Fixes: 7aeb753b5353 ("MIPS: Implement task_user_regset_view.")
Signed-off-by: Maciej W. Rozycki 
Cc: Ralf Baechle 
Cc: Djordje Todorovic 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17617/
Signed-off-by: James Hogan 
Signed-off-by: Greg Kroah-Hartman

MIPS: dts: remove bogus bcm96358nb4ser.dtb from dtb-y entry

2017-11-30T08:39:03+00:00

commit 3cad14d56adbf7d621fc5a35db42f3acc0a2d6e8 upstream.

arch/mips/boot/dts/brcm/bcm96358nb4ser.dts does not exist, so
we cannot build bcm96358nb4ser.dtb .

Signed-off-by: Masahiro Yamada 
Fixes: 695835511f96 ("MIPS: BMIPS: rename bcm96358nb4ser to bcm6358-neufbox4-sercom")
Acked-by: James Hogan 
Signed-off-by: Rob Herring 
Signed-off-by: Greg Kroah-Hartman

MIPS: Fix odd fp register warnings with MIPS64r2

2017-11-30T08:39:02+00:00

commit c7fd89a6407ea3a44a2a2fa12d290162c42499c4 upstream.

Building 32-bit MIPS64r2 kernels produces warnings like the following
on certain toolchains (such as GNU assembler 2.24.90, but not GNU
assembler 2.28.51) since commit 22b8ba765a72 ("MIPS: Fix MIPS64 FP
save/restore on 32-bit kernels"), due to the exposure of fpu_save_16odd
from fpu_save_double and fpu_restore_16odd from fpu_restore_double:

arch/mips/kernel/r4k_fpu.S:47: Warning: float register should be even, was 1
...
arch/mips/kernel/r4k_fpu.S:59: Warning: float register should be even, was 1
...

This appears to be because .set mips64r2 does not change the FPU ABI to
64-bit when -march=mips64r2 (or e.g. -march=xlp) is provided on the
command line on that toolchain, from the default FPU ABI of 32-bit due
to the -mabi=32. This makes access to the odd FPU registers invalid.

Fix by explicitly changing the FPU ABI with .set fp=64 directives in
fpu_save_16odd and fpu_restore_16odd, and moving the undefine of fp up
in asmmacro.h so fp doesn't turn into $30.

Fixes: 22b8ba765a72 ("MIPS: Fix MIPS64 FP save/restore on 32-bit kernels")
Signed-off-by: James Hogan 
Cc: Ralf Baechle 
Cc: Paul Burton 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17656/
Signed-off-by: Greg Kroah-Hartman

MIPS: pci: Remove KERN_WARN instance inside the mt7620 driver

2017-11-30T08:39:02+00:00

commit 8593b18ad348733b5d5ddfa0c79dcabf51dff308 upstream.

Switch the printk() call to the prefered pr_warn() api.

Fixes: 7e5873d3755c ("MIPS: pci: Add MT7620a PCIE driver")
Signed-off-by: John Crispin 
Cc: Ralf Baechle 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15321/
Signed-off-by: James Hogan 
Signed-off-by: Greg Kroah-Hartman