linux-toradex.git/block, branch v5.15-rc3

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2021-09-25T23:05:56+00:00

Pull SCSI fixes from James Bottomley:
 "Thirty-three fixes, I'm afraid.

  Essentially the build up from the last couple of weeks while I've been
  dealling with Linux Plumbers conference infrastructure issues. It's
  mostly the usual assortment of spelling fixes and minor corrections.

  The only core relevant changes are to the sd driver to reduce the spin
  up message spew and fix a small memory leak on the freeing path"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (33 commits)
  scsi: ses: Retry failed Send/Receive Diagnostic commands
  scsi: target: Fix spelling mistake "CONFLIFT" -> "CONFLICT"
  scsi: lpfc: Fix gcc -Wstringop-overread warning, again
  scsi: lpfc: Use correct scnprintf() limit
  scsi: lpfc: Fix sprintf() overflow in lpfc_display_fpin_wwpn()
  scsi: core: Remove 'current_tag'
  scsi: acornscsi: Remove tagged queuing vestiges
  scsi: fas216: Kill scmd->tag
  scsi: qla2xxx: Restore initiator in dual mode
  scsi: ufs: core: Unbreak the reset handler
  scsi: sd_zbc: Support disks with more than 2**32 logical blocks
  scsi: ufs: core: Revert "scsi: ufs: Synchronize SCSI and UFS error handling"
  scsi: bsg: Fix device unregistration
  scsi: sd: Make sd_spinup_disk() less noisy
  scsi: ufs: ufs-pci: Fix Intel LKF link stability
  scsi: mpt3sas: Clean up some inconsistent indenting
  scsi: megaraid: Clean up some inconsistent indenting
  scsi: sr: Fix spelling mistake "does'nt" -> "doesn't"
  scsi: Remove SCSI CDROM MAINTAINERS entry
  scsi: megaraid: Fix Coccinelle warning
  ...

block: hold ->invalidate_lock in blkdev_fallocate

2021-09-24T17:06:58+00:00

When running ->fallocate(), blkdev_fallocate() should hold
mapping->invalidate_lock to prevent page cache from being accessed,
otherwise stale data may be read in page cache.

Without this patch, blktests block/009 fails sometimes. With this patch,
block/009 can pass always.

Also as Jan pointed out, no pages can be created in the discarded area
while you are holding the invalidate_lock, so remove the 2nd
truncate_bdev_range().

Cc: Jan Kara 
Signed-off-by: Ming Lei 
Reviewed-by: Jan Kara 
Link: https://lore.kernel.org/r/20210923023751.1441091-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe

block: don't call rq_qos_ops->done_bio if the bio isn't tracked

2021-09-24T17:04:39+00:00

rq_qos framework is only applied on request based driver, so:

1) rq_qos_done_bio() needn't to be called for bio based driver

2) rq_qos_done_bio() needn't to be called for bio which isn't tracked,
such as bios ended from error handling code.

Especially in bio_endio():

1) request queue is referred via bio->bi_bdev->bd_disk->queue, which
may be gone since request queue refcount may not be held in above two
cases

2) q->rq_qos may be freed in blk_cleanup_queue() when calling into
__rq_qos_done_bio()

Fix the potential kernel panic by not calling rq_qos_ops->done_bio if
the bio isn't tracked. This way is safe because both ioc_rqos_done_bio()
and blkcg_iolatency_done_bio() are nop if the bio isn't tracked.

Reported-by: Yu Kuai 
Cc: tj@kernel.org
Signed-off-by: Ming Lei 
Reviewed-by: Christoph Hellwig 
Acked-by: Tejun Heo 
Link: https://lore.kernel.org/r/20210924110704.1541818-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe

blk-cgroup: fix UAF by grabbing blkcg lock before destroying blkg pd

2021-09-15T18:03:18+00:00

KASAN reports a use-after-free report when doing fuzz test:

[693354.104835] ==================================================================
[693354.105094] BUG: KASAN: use-after-free in bfq_io_set_weight_legacy+0xd3/0x160
[693354.105336] Read of size 4 at addr ffff888be0a35664 by task sh/1453338

[693354.105607] CPU: 41 PID: 1453338 Comm: sh Kdump: loaded Not tainted 4.18.0-147
[693354.105610] Hardware name: Huawei 2288H V5/BC11SPSCB0, BIOS 0.81 07/02/2018
[693354.105612] Call Trace:
[693354.105621]  dump_stack+0xf1/0x19b
[693354.105626]  ? show_regs_print_info+0x5/0x5
[693354.105634]  ? printk+0x9c/0xc3
[693354.105638]  ? cpumask_weight+0x1f/0x1f
[693354.105648]  print_address_description+0x70/0x360
[693354.105654]  kasan_report+0x1b2/0x330
[693354.105659]  ? bfq_io_set_weight_legacy+0xd3/0x160
[693354.105665]  ? bfq_io_set_weight_legacy+0xd3/0x160
[693354.105670]  bfq_io_set_weight_legacy+0xd3/0x160
[693354.105675]  ? bfq_cpd_init+0x20/0x20
[693354.105683]  cgroup_file_write+0x3aa/0x510
[693354.105693]  ? ___slab_alloc+0x507/0x540
[693354.105698]  ? cgroup_file_poll+0x60/0x60
[693354.105702]  ? 0xffffffff89600000
[693354.105708]  ? usercopy_abort+0x90/0x90
[693354.105716]  ? mutex_lock+0xef/0x180
[693354.105726]  kernfs_fop_write+0x1ab/0x280
[693354.105732]  ? cgroup_file_poll+0x60/0x60
[693354.105738]  vfs_write+0xe7/0x230
[693354.105744]  ksys_write+0xb0/0x140
[693354.105749]  ? __ia32_sys_read+0x50/0x50
[693354.105760]  do_syscall_64+0x112/0x370
[693354.105766]  ? syscall_return_slowpath+0x260/0x260
[693354.105772]  ? do_page_fault+0x9b/0x270
[693354.105779]  ? prepare_exit_to_usermode+0xf9/0x1a0
[693354.105784]  ? enter_from_user_mode+0x30/0x30
[693354.105793]  entry_SYSCALL_64_after_hwframe+0x65/0xca

[693354.105875] Allocated by task 1453337:
[693354.106001]  kasan_kmalloc+0xa0/0xd0
[693354.106006]  kmem_cache_alloc_node_trace+0x108/0x220
[693354.106010]  bfq_pd_alloc+0x96/0x120
[693354.106015]  blkcg_activate_policy+0x1b7/0x2b0
[693354.106020]  bfq_create_group_hierarchy+0x1e/0x80
[693354.106026]  bfq_init_queue+0x678/0x8c0
[693354.106031]  blk_mq_init_sched+0x1f8/0x460
[693354.106037]  elevator_switch_mq+0xe1/0x240
[693354.106041]  elevator_switch+0x25/0x40
[693354.106045]  elv_iosched_store+0x1a1/0x230
[693354.106049]  queue_attr_store+0x78/0xb0
[693354.106053]  kernfs_fop_write+0x1ab/0x280
[693354.106056]  vfs_write+0xe7/0x230
[693354.106060]  ksys_write+0xb0/0x140
[693354.106064]  do_syscall_64+0x112/0x370
[693354.106069]  entry_SYSCALL_64_after_hwframe+0x65/0xca

[693354.106114] Freed by task 1453336:
[693354.106225]  __kasan_slab_free+0x130/0x180
[693354.106229]  kfree+0x90/0x1b0
[693354.106233]  blkcg_deactivate_policy+0x12c/0x220
[693354.106238]  bfq_exit_queue+0xf5/0x110
[693354.106241]  blk_mq_exit_sched+0x104/0x130
[693354.106245]  __elevator_exit+0x45/0x60
[693354.106249]  elevator_switch_mq+0xd6/0x240
[693354.106253]  elevator_switch+0x25/0x40
[693354.106257]  elv_iosched_store+0x1a1/0x230
[693354.106261]  queue_attr_store+0x78/0xb0
[693354.106264]  kernfs_fop_write+0x1ab/0x280
[693354.106268]  vfs_write+0xe7/0x230
[693354.106271]  ksys_write+0xb0/0x140
[693354.106275]  do_syscall_64+0x112/0x370
[693354.106280]  entry_SYSCALL_64_after_hwframe+0x65/0xca

[693354.106329] The buggy address belongs to the object at ffff888be0a35580
                 which belongs to the cache kmalloc-1k of size 1024
[693354.106736] The buggy address is located 228 bytes inside of
                 1024-byte region [ffff888be0a35580, ffff888be0a35980)
[693354.107114] The buggy address belongs to the page:
[693354.107273] page:ffffea002f828c00 count:1 mapcount:0 mapping:ffff888107c17080 index:0x0 compound_mapcount: 0
[693354.107606] flags: 0x17ffffc0008100(slab|head)
[693354.107760] raw: 0017ffffc0008100 ffffea002fcbc808 ffffea0030bd3a08 ffff888107c17080
[693354.108020] raw: 0000000000000000 00000000001c001c 00000001ffffffff 0000000000000000
[693354.108278] page dumped because: kasan: bad access detected

[693354.108511] Memory state around the buggy address:
[693354.108671]  ffff888be0a35500: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[693354.116396]  ffff888be0a35580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[693354.124473] >ffff888be0a35600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[693354.132421]                                                        ^
[693354.140284]  ffff888be0a35680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[693354.147912]  ffff888be0a35700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[693354.155281] ==================================================================

blkgs are protected by both queue and blkcg locks and holding
either should stabilize them. However, the path of destroying
blkg policy data is only protected by queue lock in
blkcg_activate_policy()/blkcg_deactivate_policy(). Other tasks
can get the blkg policy data before the blkg policy data is
destroyed, and use it after destroyed, which will result in a
use-after-free.

CPU0                             CPU1
blkcg_deactivate_policy
  spin_lock_irq(&q->queue_lock)
                                 bfq_io_set_weight_legacy
                                   spin_lock_irq(&blkcg->lock)
                                   blkg_to_bfqg(blkg)
                                     pd_to_bfqg(blkg->pd[pol->plid])
                                     ^^^^^^blkg->pd[pol->plid] != NULL
                                           bfqg != NULL
  pol->pd_free_fn(blkg->pd[pol->plid])
    pd_to_bfqg(blkg->pd[pol->plid])
    bfqg_put(bfqg)
      kfree(bfqg)
  blkg->pd[pol->plid] = NULL
  spin_unlock_irq(q->queue_lock);
                                   bfq_group_set_weight(bfqg, val, 0)
                                     bfqg->entity.new_weight
                                     ^^^^^^trigger uaf here
                                   spin_unlock_irq(&blkcg->lock);

Fix by grabbing the matching blkcg lock before trying to
destroy blkg policy data.

Suggested-by: Tejun Heo 
Signed-off-by: Li Jinlin 
Acked-by: Tejun Heo 
Link: https://lore.kernel.org/r/20210914042605.3260596-1-lijinlin3@huawei.com
Signed-off-by: Jens Axboe

blkcg: fix memory leak in blk_iolatency_init

2021-09-15T17:57:44+00:00

BUG: memory leak
unreferenced object 0xffff888129acdb80 (size 96):
  comm "syz-executor.1", pid 12661, jiffies 4294962682 (age 15.220s)
  hex dump (first 32 bytes):
    20 47 c9 85 ff ff ff ff 20 d4 8e 29 81 88 ff ff   G...... ..)....
    01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [] kmalloc include/linux/slab.h:591 [inline]
    [] kzalloc include/linux/slab.h:721 [inline]
    [] blk_iolatency_init+0x28/0x190 block/blk-iolatency.c:724
    [] blkcg_init_queue+0xb4/0x1c0 block/blk-cgroup.c:1185
    [] blk_alloc_queue+0x22a/0x2e0 block/blk-core.c:566
    [] blk_mq_init_queue_data block/blk-mq.c:3100 [inline]
    [] __blk_mq_alloc_disk+0x25/0xd0 block/blk-mq.c:3124
    [] loop_add+0x1c3/0x360 drivers/block/loop.c:2344
    [] loop_control_get_free drivers/block/loop.c:2501 [inline]
    [] loop_control_ioctl+0x17e/0x2e0 drivers/block/loop.c:2516
    [] vfs_ioctl fs/ioctl.c:51 [inline]
    [] __do_sys_ioctl fs/ioctl.c:874 [inline]
    [] __se_sys_ioctl fs/ioctl.c:860 [inline]
    [] __x64_sys_ioctl+0xfc/0x140 fs/ioctl.c:860
    [] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
    [] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
    [] entry_SYSCALL_64_after_hwframe+0x44/0xae

Once blk_throtl_init() queue init failed, blkcg_iolatency_exit() will
not be invoked for cleanup. That leads a memory leak. Swap the
blk_throtl_init() and blk_iolatency_init() calls can solve this.

Reported-by: syzbot+01321b15cc98e6bf96d6@syzkaller.appspotmail.com
Fixes: 19688d7f9592 (block/blk-cgroup: Swap the blk_throtl_init() and blk_iolatency_init() calls)
Signed-off-by: Yanfei Xu 
Acked-by: Tejun Heo 
Link: https://lore.kernel.org/r/20210915072426.4022924-1-yanfei.xu@windriver.com
Signed-off-by: Jens Axboe

block: flush the integrity workqueue in blk_integrity_unregister

2021-09-15T02:03:30+00:00

When the integrity profile is unregistered there can still be integrity
reads queued up which could see a NULL verify_fn as shown by the race
window below:

CPU0                                    CPU1
  process_one_work                      nvme_validate_ns
    bio_integrity_verify_fn                nvme_update_ns_info
	                                     nvme_update_disk_info
	                                       blk_integrity_unregister
                                               ---set queue->integrity as 0
	bio_integrity_process
	--access bi->profile->verify_fn(bi is a pointer of queue->integity)

Before calling blk_integrity_unregister in nvme_update_disk_info, we must
make sure that there is no work item in the kintegrityd_wq. Just call
blk_flush_integrity to flush the work queue so the bug can be resolved.

Signed-off-by: Lihong Kou 
[hch: split up and shortened the changelog]
Signed-off-by: Christoph Hellwig 
Reviewed-by: Sagi Grimberg 
Link: https://lore.kernel.org/r/20210914070657.87677-3-hch@lst.de
Signed-off-by: Jens Axboe

block: check if a profile is actually registered in blk_integrity_unregister

2021-09-15T02:03:30+00:00

While clearing the profile itself is harmless, we really should not clear
the stable writes flag if it wasn't set due to a registered integrity
profile.

Reported-by: Lihong Kou 
Signed-off-by: Christoph Hellwig 
Reviewed-by: Sagi Grimberg 
Link: https://lore.kernel.org/r/20210914070657.87677-2-hch@lst.de
Signed-off-by: Jens Axboe

scsi: bsg: Fix device unregistration

2021-09-14T04:22:15+00:00

device_initialize() is used to take a refcount on the device. However,
put_device() is not called during device teardown. This leads to a
leak of private data of the driver core, dev_name(), etc. This is
reported by kmemleak at boot time if we compile kernel with
DEBUG_TEST_DRIVER_REMOVE.

Fix memory leaks during unregistration and implement a release
function.

Link: https://lore.kernel.org/r/20210911105306.1511-1-yuzenghui@huawei.com
Fixes: ead09dd3aed5 ("scsi: bsg: Simplify device registration")
Reviewed-by: Johan Hovold 
Signed-off-by: Zenghui Yu 
Signed-off-by: Martin K. Petersen

blk-mq: avoid to iterate over stale request

2021-09-13T01:32:43+00:00

blk-mq can't run allocating driver tag and updating ->rqs[tag]
atomically, meantime blk-mq doesn't clear ->rqs[tag] after the driver
tag is released.

So there is chance to iterating over one stale request just after the
tag is allocated and before updating ->rqs[tag].

scsi_host_busy_iter() calls scsi_host_check_in_flight() to count scsi
in-flight requests after scsi host is blocked, so no new scsi command can
be marked as SCMD_STATE_INFLIGHT. However, driver tag allocation still can
be run by blk-mq core. One request is marked as SCMD_STATE_INFLIGHT,
but this request may have been kept in another slot of ->rqs[], meantime
the slot can be allocated out but ->rqs[] isn't updated yet. Then this
in-flight request is counted twice as SCMD_STATE_INFLIGHT. This way causes
trouble in handling scsi error.

Fixes the issue by not iterating over stale request.

Cc: linux-scsi@vger.kernel.org
Cc: "Martin K. Petersen" 
Reported-by: luojiaxing 
Signed-off-by: Ming Lei 
Link: https://lore.kernel.org/r/20210906065003.439019-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe

Merge tag 'block-5.15-2021-09-11' of git://git.kernel.dk/linux-block

2021-09-11T17:19:51+00:00

Pull block fixes from Jens Axboe:

 - NVMe pull request from Christoph:
     - fix nvmet command set reporting for passthrough controllers (Adam Manzanares)
     - update a MAINTAINERS email address (Chaitanya Kulkarni)
     - set QUEUE_FLAG_NOWAIT for nvme-multipth (me)
     - handle errors from add_disk() (Luis Chamberlain)
     - update the keep alive interval when kato is modified (Tatsuya Sasaki)
     - fix a buffer overrun in nvmet_subsys_attr_serial (Hannes Reinecke)
     - do not reset transport on data digest errors in nvme-tcp (Daniel Wagner)
     - only call synchronize_srcu when clearing current path (Daniel Wagner)
     - revalidate paths during rescan (Hannes Reinecke)

 - Split out the fs/block_dev into block/fops.c and block/bdev.c, which
   has been long overdue. Do this now before -rc1, to avoid annoying
   conflicts due to this (Christoph)

 - blk-throtl use-after-free fix (Li)

 - Improve plug depth for multi-device plugs, greatly increasing md
   resync performance (Song)

 - blkdev_show() locking fix (Tetsuo)

 - n64cart error check fix (Yang)

* tag 'block-5.15-2021-09-11' of git://git.kernel.dk/linux-block:
  n64cart: fix return value check in n64cart_probe()
  blk-mq: allow 4x BLK_MAX_REQUEST_COUNT at blk_plug for multiple_queues
  block: move fs/block_dev.c to block/bdev.c
  block: split out operations on block special files
  blk-throttle: fix UAF by deleteing timer in blk_throtl_exit()
  block: genhd: don't call blkdev_show() with major_names_lock held
  nvme: update MAINTAINERS email address
  nvme: add error handling support for add_disk()
  nvme: only call synchronize_srcu when clearing current path
  nvme: update keep alive interval when kato is modified
  nvme-tcp: Do not reset transport on data digest errors
  nvmet: fixup buffer overrun in nvmet_subsys_attr_serial()
  nvmet: return bool from nvmet_passthru_ctrl and nvmet_is_passthru_req
  nvmet: looks at the passthrough controller when initializing CAP
  nvme: move nvme_multi_css into nvme.h
  nvme-multipath: revalidate paths during rescan
  nvme-multipath: set QUEUE_FLAG_NOWAIT