linux-toradex.git/crypto, branch v5.9-rc6

Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

2020-08-30T22:53:44+00:00

Pull crypto fixes from Herbert Xu:

 - fix regression in af_alg that affects iwd

 - restore polling delay in qat

 - fix double free in ingenic on error path

 - fix potential build failure in sa2ul due to missing Kconfig dependency

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: af_alg - Work around empty control messages without MSG_MORE
  crypto: sa2ul - add Kconfig selects to fix build error
  crypto: ingenic - Drop kfree for memory allocated with devm_kzalloc
  crypto: qat - add delay before polling mailbox

crypto: af_alg - Work around empty control messages without MSG_MORE

2020-08-27T13:20:36+00:00

The iwd daemon uses libell which sets up the skcipher operation with
two separate control messages.  As the first control message is sent
without MSG_MORE, it is interpreted as an empty request.

While libell should be fixed to use MSG_MORE where appropriate, this
patch works around the bug in the kernel so that existing binaries
continue to work.

We will print a warning however.

A separate issue is that the new kernel code no longer allows the
control message to be sent twice within the same request.  This
restriction is obviously incompatible with what iwd was doing (first
setting an IV and then sending the real control message).  This
patch changes the kernel so that this is explicitly allowed.

Reported-by: Caleb Jorden 
Fixes: f3c802a1f300 ("crypto: algif_aead - Only wake up when...")
Cc: 
Signed-off-by: Herbert Xu

treewide: Use fallthrough pseudo-keyword

2020-08-23T22:36:59+00:00

Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.

[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through

Signed-off-by: Gustavo A. R. Silva

Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

2020-08-14T20:09:15+00:00

Pull crypto fix from Herbert Xu:
 "This fixes a regression in af_alg"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: algif_aead - fix uninitialized ctx->init

crypto: algif_aead - fix uninitialized ctx->init

2020-08-13T07:09:32+00:00

In skcipher_accept_parent_nokey() the whole af_alg_ctx structure is
cleared by memset() after allocation, so add such memset() also to
aead_accept_parent_nokey() so that the new "init" field is also
initialized to zero. Without that the initial ctx->init checks might
randomly return true and cause errors.

While there, also remove the redundant zero assignments in both
functions.

Found via libkcapi testsuite.

Cc: Stephan Mueller 
Fixes: f3c802a1f300 ("crypto: algif_aead - Only wake up when ctx->more is zero")
Suggested-by: Herbert Xu 
Signed-off-by: Ondrej Mosnacek 
Signed-off-by: Herbert Xu

mm, treewide: rename kzfree() to kfree_sensitive()

2020-08-07T18:33:22+00:00

As said by Linus:

  A symmetric naming is only helpful if it implies symmetries in use.
  Otherwise it's actively misleading.

  In "kzalloc()", the z is meaningful and an important part of what the
  caller wants.

  In "kzfree()", the z is actively detrimental, because maybe in the
  future we really _might_ want to use that "memfill(0xdeadbeef)" or
  something. The "zero" part of the interface isn't even _relevant_.

The main reason that kzfree() exists is to clear sensitive information
that should not be leaked to other future users of the same memory
objects.

Rename kzfree() to kfree_sensitive() to follow the example of the recently
added kvfree_sensitive() and make the intention of the API more explicit.
In addition, memzero_explicit() is used to clear the memory to make sure
that it won't get optimized away by the compiler.

The renaming is done by using the command sequence:

  git grep -w --name-only kzfree |\
  xargs sed -i 's/kzfree/kfree_sensitive/'

followed by some editing of the kfree_sensitive() kerneldoc and adding
a kzfree backward compatibility macro in slab.h.

[akpm@linux-foundation.org: fs/crypto/inline_crypt.c needs linux/slab.h]
[akpm@linux-foundation.org: fix fs/crypto/inline_crypt.c some more]

Suggested-by: Joe Perches 
Signed-off-by: Waiman Long 
Signed-off-by: Andrew Morton 
Acked-by: David Howells 
Acked-by: Michal Hocko 
Acked-by: Johannes Weiner 
Cc: Jarkko Sakkinen 
Cc: James Morris 
Cc: "Serge E. Hallyn" 
Cc: Joe Perches 
Cc: Matthew Wilcox 
Cc: David Rientjes 
Cc: Dan Carpenter 
Cc: "Jason A . Donenfeld" 
Link: http://lkml.kernel.org/r/20200616154311.12314-3-longman@redhat.com
Signed-off-by: Linus Torvalds

Merge tag 'sched-fifo-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2020-08-06T18:55:43+00:00

Pull sched/fifo updates from Ingo Molnar:
 "This adds the sched_set_fifo*() encapsulation APIs to remove static
  priority level knowledge from non-scheduler code.

  The three APIs for non-scheduler code to set SCHED_FIFO are:

   - sched_set_fifo()
   - sched_set_fifo_low()
   - sched_set_normal()

  These are two FIFO priority levels: default (high), and a 'low'
  priority level, plus sched_set_normal() to set the policy back to
  non-SCHED_FIFO.

  Since the changes affect a lot of non-scheduler code, we kept this in
  a separate tree"

* tag 'sched-fifo-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  sched,tracing: Convert to sched_set_fifo()
  sched: Remove sched_set_*() return value
  sched: Remove sched_setscheduler*() EXPORTs
  sched,psi: Convert to sched_set_fifo_low()
  sched,rcutorture: Convert to sched_set_fifo_low()
  sched,rcuperf: Convert to sched_set_fifo_low()
  sched,locktorture: Convert to sched_set_fifo()
  sched,irq: Convert to sched_set_fifo()
  sched,watchdog: Convert to sched_set_fifo()
  sched,serial: Convert to sched_set_fifo()
  sched,powerclamp: Convert to sched_set_fifo()
  sched,ion: Convert to sched_set_normal()
  sched,powercap: Convert to sched_set_fifo*()
  sched,spi: Convert to sched_set_fifo*()
  sched,mmc: Convert to sched_set_fifo*()
  sched,ivtv: Convert to sched_set_fifo*()
  sched,drm/scheduler: Convert to sched_set_fifo*()
  sched,msm: Convert to sched_set_fifo*()
  sched,psci: Convert to sched_set_fifo*()
  sched,drbd: Convert to sched_set_fifo*()
  ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2020-08-06T03:13:21+00:00

Pull networking updates from David Miller:

 1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan.

 2) Support UDP segmentation in code TSO code, from Eric Dumazet.

 3) Allow flashing different flash images in cxgb4 driver, from Vishal
    Kulkarni.

 4) Add drop frames counter and flow status to tc flower offloading,
    from Po Liu.

 5) Support n-tuple filters in cxgb4, from Vishal Kulkarni.

 6) Various new indirect call avoidance, from Eric Dumazet and Brian
    Vazquez.

 7) Fix BPF verifier failures on 32-bit pointer arithmetic, from
    Yonghong Song.

 8) Support querying and setting hardware address of a port function via
    devlink, use this in mlx5, from Parav Pandit.

 9) Support hw ipsec offload on bonding slaves, from Jarod Wilson.

10) Switch qca8k driver over to phylink, from Jonathan McDowell.

11) In bpftool, show list of processes holding BPF FD references to
    maps, programs, links, and btf objects. From Andrii Nakryiko.

12) Several conversions over to generic power management, from Vaibhav
    Gupta.

13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry
    Yakunin.

14) Various https url conversions, from Alexander A. Klimov.

15) Timestamping and PHC support for mscc PHY driver, from Antoine
    Tenart.

16) Support bpf iterating over tcp and udp sockets, from Yonghong Song.

17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov.

18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan.

19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several
    drivers. From Luc Van Oostenryck.

20) XDP support for xen-netfront, from Denis Kirjanov.

21) Support receive buffer autotuning in MPTCP, from Florian Westphal.

22) Support EF100 chip in sfc driver, from Edward Cree.

23) Add XDP support to mvpp2 driver, from Matteo Croce.

24) Support MPTCP in sock_diag, from Paolo Abeni.

25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic
    infrastructure, from Jakub Kicinski.

26) Several pci_ --> dma_ API conversions, from Christophe JAILLET.

27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel.

28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki.

29) Refactor a lot of networking socket option handling code in order to
    avoid set_fs() calls, from Christoph Hellwig.

30) Add rfc4884 support to icmp code, from Willem de Bruijn.

31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei.

32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin.

33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin.

34) Support TCP syncookies in MPTCP, from Flowian Westphal.

35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano
    Brivio.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits)
  net: thunderx: initialize VF's mailbox mutex before first usage
  usb: hso: remove bogus check for EINPROGRESS
  usb: hso: no complaint about kmalloc failure
  hso: fix bailout in error case of probe
  ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM
  selftests/net: relax cpu affinity requirement in msg_zerocopy test
  mptcp: be careful on subflow creation
  selftests: rtnetlink: make kci_test_encap() return sub-test result
  selftests: rtnetlink: correct the final return value for the test
  net: dsa: sja1105: use detected device id instead of DT one on mismatch
  tipc: set ub->ifindex for local ipv6 address
  ipv6: add ipv6_dev_find()
  net: openvswitch: silence suspicious RCU usage warning
  Revert "vxlan: fix tos value before xmit"
  ptp: only allow phase values lower than 1 period
  farsync: switch from 'pci_' to 'dma_' API
  wan: wanxl: switch from 'pci_' to 'dma_' API
  hv_netvsc: do not use VF device if link is down
  dpaa2-eth: Fix passing zero to 'PTR_ERR' warning
  net: macb: Properly handle phylink on at91sam9x
  ...

Merge tag 'docs-5.9' of git://git.lwn.net/linux

2020-08-05T05:47:54+00:00

Pull documentation updates from Jonathan Corbet:
 "It's been a busy cycle for documentation - hopefully the busiest for a
  while to come. Changes include:

   - Some new Chinese translations

   - Progress on the battle against double words words and non-HTTPS
     URLs

   - Some block-mq documentation

   - More RST conversions from Mauro. At this point, that task is
     essentially complete, so we shouldn't see this kind of churn again
     for a while. Unless we decide to switch to asciidoc or
     something...:)

   - Lots of typo fixes, warning fixes, and more"

* tag 'docs-5.9' of git://git.lwn.net/linux: (195 commits)
  scripts/kernel-doc: optionally treat warnings as errors
  docs: ia64: correct typo
  mailmap: add entry for 
  doc/zh_CN: add cpu-load Chinese version
  Documentation/admin-guide: tainted-kernels: fix spelling mistake
  MAINTAINERS: adjust kprobes.rst entry to new location
  devices.txt: document rfkill allocation
  PCI: correct flag name
  docs: filesystems: vfs: correct flag name
  docs: filesystems: vfs: correct sync_mode flag names
  docs: path-lookup: markup fixes for emphasis
  docs: path-lookup: more markup fixes
  docs: path-lookup: fix HTML entity mojibake
  CREDITS: Replace HTTP links with HTTPS ones
  docs: process: Add an example for creating a fixes tag
  doc/zh_CN: add Chinese translation prefer section
  doc/zh_CN: add clearing-warn-once Chinese version
  doc/zh_CN: add admin-guide index
  doc:it_IT: process: coding-style.rst: Correct __maybe_unused compiler label
  futex: MAINTAINERS: Re-add selftests directory
  ...

Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

2020-08-03T17:40:14+00:00

Pull crypto updates from Herbert Xu:
 "API:
   - Add support for allocating transforms on a specific NUMA Node
   - Introduce the flag CRYPTO_ALG_ALLOCATES_MEMORY for storage users

  Algorithms:
   - Drop PMULL based ghash on arm64
   - Fixes for building with clang on x86
   - Add sha256 helper that does the digest in one go
   - Add SP800-56A rev 3 validation checks to dh

  Drivers:
   - Permit users to specify NUMA node in hisilicon/zip
   - Add support for i.MX6 in imx-rngc
   - Add sa2ul crypto driver
   - Add BA431 hwrng driver
   - Add Ingenic JZ4780 and X1000 hwrng driver
   - Spread IRQ affinity in inside-secure and marvell/cesa"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (157 commits)
  crypto: sa2ul - Fix inconsistent IS_ERR and PTR_ERR
  hwrng: core - remove redundant initialization of variable ret
  crypto: x86/curve25519 - Remove unused carry variables
  crypto: ingenic - Add hardware RNG for Ingenic JZ4780 and X1000
  dt-bindings: RNG: Add Ingenic RNG bindings.
  crypto: caam/qi2 - add module alias
  crypto: caam - add more RNG hw error codes
  crypto: caam/jr - remove incorrect reference to caam_jr_register()
  crypto: caam - silence .setkey in case of bad key length
  crypto: caam/qi2 - create ahash shared descriptors only once
  crypto: caam/qi2 - fix error reporting for caam_hash_alloc
  crypto: caam - remove deadcode on 32-bit platforms
  crypto: ccp - use generic power management
  crypto: xts - Replace memcpy() invocation with simple assignment
  crypto: marvell/cesa - irq balance
  crypto: inside-secure - irq balance
  crypto: ecc - SP800-56A rev 3 local public key validation
  crypto: dh - SP800-56A rev 3 local public key validation
  crypto: dh - check validity of Z before export
  lib/mpi: Add mpi_sub_ui()
  ...