Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Replace busylock at the Tx queuing layer with a lockless list.

     Resulting in a 300% (4x) improvement on heavy TX workloads, sending
     twice the number of packets per second, for half the cpu cycles.

   - Allow constantly busy flows to migrate to a more suitable CPU/NIC
     queue.

     Normally we perform queue re-selection when flow comes out of idle,
     but under extreme circumstances the flows may be constantly busy.

     Add sysctl to allow periodic rehashing even if it'd risk packet
     reordering.

   - Optimize the NAPI skb cache, make it larger, use it in more paths.

   - Attempt returning Tx skbs to the originating CPU (like we already
     did for Rx skbs).

   - Various data structure layout and prefetch optimizations from Eric.

   - Remove ktime_get() from the recvmsg() fast path, ktime_get() is
     sadly quite expensive on recent AMD machines.

   - Extend threaded NAPI polling to allow the kthread busy poll for
     packets.

   - Make MPTCP use Rx backlog processing. This lowers the lock
     pressure, improving the Rx performance.

   - Support memcg accounting of MPTCP socket memory.

   - Allow admin to opt sockets out of global protocol memory accounting
     (using a sysctl or BPF-based policy). The global limits are a poor
     fit for modern container workloads, where limits are imposed using
     cgroups.

   - Improve heuristics for when to kick off AF_UNIX garbage collection.

   - Allow users to control TCP SACK compression, and default to 33% of
     RTT.

   - Add tcp_rcvbuf_low_rtt sysctl to let datacenter users avoid
     unnecessarily aggressive rcvbuf growth and overshot when the
     connection RTT is low.

   - Preserve skb metadata space across skb_push / skb_pull operations.

   - Support for IPIP encapsulation in the nftables flowtable offload.

   - Support appending IP interface information to ICMP messages (RFC
     5837).

   - Support setting max record size in TLS (RFC 8449).

   - Remove taking rtnl_lock from RTM_GETNEIGHTBL and RTM_SETNEIGHTBL.

   - Use a dedicated lock (and RCU) in MPLS, instead of rtnl_lock.

   - Let users configure the number of write buffers in SMC.

   - Add new struct sockaddr_unsized for sockaddr of unknown length,
     from Kees.

   - Some conversions away from the crypto_ahash API, from Eric Biggers.

   - Some preparations for slimming down struct page.

   - YAML Netlink protocol spec for WireGuard.

   - Add a tool on top of YAML Netlink specs/lib for reporting commonly
     computed derived statistics and summarized system state.

  Driver API:

   - Add CAN XL support to the CAN Netlink interface.

   - Add uAPI for reporting PHY Mean Square Error (MSE) diagnostics, as
     defined by the OPEN Alliance's "Advanced diagnostic features for
     100BASE-T1 automotive Ethernet PHYs" specification.

   - Add DPLL phase-adjust-gran pin attribute (and implement it in
     zl3073x).

   - Refactor xfrm_input lock to reduce contention when NIC offloads
     IPsec and performs RSS.

   - Add info to devlink params whether the current setting is the
     default or a user override. Allow resetting back to default.

   - Add standard device stats for PSP crypto offload.

   - Leverage DSA frame broadcast to implement simple HSR frame
     duplication for a lot of switches without dedicated HSR offload.

   - Add uAPI defines for 1.6Tbps link modes.

  Device drivers:

   - Add Motorcomm YT921x gigabit Ethernet switch support.

   - Add MUCSE driver for N500/N210 1GbE NIC series.

   - Convert drivers to support dedicated ops for timestamping control,
     and away from the direct IOCTL handling. While at it support GET
     operations for PHY timestamping.

   - Add (and convert most drivers to) a dedicated ethtool callback for
     reading the Rx ring count.

   - Significant refactoring efforts in the STMMAC driver, which
     supports Synopsys turn-key MAC IP integrated into a ton of SoCs.

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - support PPS in/out on all pins
      - Intel (100G, ice, idpf):
         - ice: implement standard ethtool and timestamping stats
         - i40e: support setting the max number of MAC addresses per VF
         - iavf: support RSS of GTP tunnels for 5G and LTE deployments
      - nVidia/Mellanox (mlx5):
         - reduce downtime on interface reconfiguration
         - disable being an XDP redirect target by default (same as
           other drivers) to avoid wasting resources if feature is
           unused
      - Meta (fbnic):
         - add support for Linux-managed PCS on 25G, 50G, and 100G links
      - Wangxun:
         - support Rx descriptor merge, and Tx head writeback
         - support Rx coalescing offload
         - support 25G SPF and 40G QSFP modules

   - Ethernet virtual:
      - Google (gve):
         - allow ethtool to configure rx_buf_len
         - implement XDP HW RX Timestamping support for DQ descriptor
           format
      - Microsoft vNIC (mana):
         - support HW link state events
         - handle hardware recovery events when probing the device

   - Ethernet NICs consumer, and embedded:
      - usbnet: add support for Byte Queue Limits (BQL)
      - AMD (amd-xgbe):
         - add device selftests
      - NXP (enetc):
         - add i.MX94 support
      - Broadcom integrated MACs (bcmgenet, bcmasp):
         - bcmasp: add support for PHY-based Wake-on-LAN
      - Broadcom switches (b53):
         - support port isolation
         - support BCM5389/97/98 and BCM63XX ARL formats
      - Lantiq/MaxLinear switches:
         - support bridge FDB entries on the CPU port
         - use regmap for register access
         - allow user to enable/disable learning
         - support Energy Efficient Ethernet
         - support configuring RMII clock delays
         - add tagging driver for MaxLinear GSW1xx switches
      - Synopsys (stmmac):
         - support using the HW clock in free running mode
         - add Eswin EIC7700 support
         - add Rockchip RK3506 support
         - add Altera Agilex5 support
      - Cadence (macb):
         - cleanup and consolidate descriptor and DMA address handling
         - add EyeQ5 support
      - TI:
         - icssg-prueth: support AF_XDP
      - Airoha access points:
         - add missing Ethernet stats and link state callback
         - add AN7583 support
         - support out-of-order Tx completion processing
      - Power over Ethernet:
         - pd692x0: preserve PSE configuration across reboots
         - add support for TPS23881B devices

   - Ethernet PHYs:
      - Open Alliance OATC14 10BASE-T1S PHY cable diagnostic support
      - Support 50G SerDes and 100G interfaces in Linux-managed PHYs
      - micrel:
         - support for non PTP SKUs of lan8814
         - enable in-band auto-negotiation on lan8814
      - realtek:
         - cable testing support on RTL8224
         - interrupt support on RTL8221B
      - motorcomm: support for PHY LEDs on YT853
      - microchip: support for LAN867X Rev.D0 PHYs w/ SQI and cable diag
      - mscc: support for PHY LED control

   - CAN drivers:
      - m_can: add support for optional reset and system wake up
      - remove can_change_mtu() obsoleted by core handling
      - mcp251xfd: support GPIO controller functionality

   - Bluetooth:
      - add initial support for PASTa

   - WiFi:
      - split ieee80211.h file, it's way too big
      - improvements in VHT radiotap reporting, S1G, Channel Switch
        Announcement handling, rate tracking in mesh networks
      - improve multi-radio monitor mode support, and add a cfg80211
        debugfs interface for it
      - HT action frame handling on 6 GHz
      - initial chanctx work towards NAN
      - MU-MIMO sniffer improvements

   - WiFi drivers:
      - RealTek (rtw89):
         - support USB devices RTL8852AU and RTL8852CU
         - initial work for RTL8922DE
         - improved injection support
      - Intel:
         - iwlwifi: new sniffer API support
      - MediaTek (mt76):
         - WED support for >32-bit DMA
         - airoha NPU support
         - regdomain improvements
         - continued WiFi7/MLO work
      - Qualcomm/Atheros:
         - ath10k: factory test support
         - ath11k: TX power insertion support
         - ath12k: BSS color change support
         - ath12k: statistics improvements
      - brcmfmac: Acer A1 840 tablet quirk
      - rtl8xxxu: 40 MHz connection fixes/support"

* tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1381 commits)
  net: page_pool: sanitise allocation order
  net: page pool: xa init with destroy on pp init
  net/mlx5e: Support XDP target xmit with dummy program
  net/mlx5e: Update XDP features in switch channels
  selftests/tc-testing: Test CAKE scheduler when enqueue drops packets
  net/sched: sch_cake: Fix incorrect qlen reduction in cake_drop
  wireguard: netlink: generate netlink code
  wireguard: uapi: generate header with ynl-gen
  wireguard: uapi: move flag enums
  wireguard: uapi: move enum wg_cmd
  wireguard: netlink: add YNL specification
  selftests: drv-net: Fix tolerance calculation in devlink_rate_tc_bw.py
  selftests: drv-net: Fix and clarify TC bandwidth split in devlink_rate_tc_bw.py
  selftests: drv-net: Set shell=True for sysfs writes in devlink_rate_tc_bw.py
  selftests: drv-net: Use Iperf3Runner in devlink_rate_tc_bw.py
  selftests: drv-net: introduce Iperf3Runner for measurement use cases
  selftests: drv-net: Add devlink_rate_tc_bw.py to TEST_PROGS
  net: ps3_gelic_net: Use napi_alloc_skb() and napi_gro_receive()
  Documentation: net: dsa: mention simple HSR offload helpers
  Documentation: net: dsa: mention availability of RedBox
  ...

Pull crypto updates from Herbert Xu:
 "API:
   - Rewrite memcpy_sglist from scratch
   - Add on-stack AEAD request allocation
   - Fix partial block processing in ahash

  Algorithms:
   - Remove ansi_cprng
   - Remove tcrypt tests for poly1305
   - Fix EINPROGRESS processing in authenc
   - Fix double-free in zstd

  Drivers:
   - Use drbg ctr helper when reseeding xilinx-trng
   - Add support for PCI device 0x115A to ccp
   - Add support of paes in caam
   - Add support for aes-xts in dthev2

  Others:
   - Use likely in rhashtable lookup
   - Fix lockdep false-positive in padata by removing a helper"

* tag 'v6.19-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (71 commits)
  crypto: zstd - fix double-free in per-CPU stream cleanup
  crypto: ahash - Zero positive err value in ahash_update_finish
  crypto: ahash - Fix crypto_ahash_import with partial block data
  crypto: lib/mpi - use min() instead of min_t()
  crypto: ccp - use min() instead of min_t()
  hwrng: core - use min3() instead of nested min_t()
  crypto: aesni - ctr_crypt() use min() instead of min_t()
  crypto: drbg - Delete unused ctx from struct sdesc
  crypto: testmgr - Add missing DES weak and semi-weak key tests
  Revert "crypto: scatterwalk - Move skcipher walk and use it for memcpy_sglist"
  crypto: scatterwalk - Fix memcpy_sglist() to always succeed
  crypto: iaa - Request to add Kanchana P Sridhar to Maintainers.
  crypto: tcrypt - Remove unused poly1305 support
  crypto: ansi_cprng - Remove unused ansi_cprng algorithm
  crypto: asymmetric_keys - fix uninitialized pointers with free attribute
  KEYS: Avoid -Wflex-array-member-not-at-end warning
  crypto: ccree - Correctly handle return of sg_nents_for_len
  crypto: starfive - Correctly handle return of sg_nents_for_len
  crypto: iaa - Fix incorrect return value in save_iaa_wq()
  crypto: zstd - Remove unnecessary size_t cast
  ...

Pull arm64 FPSIMD on-stack buffer updates from Eric Biggers:
 "This is a core arm64 change. However, I was asked to take this because
  most uses of kernel-mode FPSIMD are in crypto or CRC code.

  In v6.8, the size of task_struct on arm64 increased by 528 bytes due
  to the new 'kernel_fpsimd_state' field. This field was added to allow
  kernel-mode FPSIMD code to be preempted.

  Unfortunately, 528 bytes is kind of a lot for task_struct. This
  regression in the task_struct size was noticed and reported.

  Recover that space by making this state be allocated on the stack at
  the beginning of each kernel-mode FPSIMD section.

  To make it easier for all the users of kernel-mode FPSIMD to do that
  correctly, introduce and use a 'scoped_ksimd' abstraction"

* tag 'fpsimd-on-stack-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (23 commits)
  lib/crypto: arm64: Move remaining algorithms to scoped ksimd API
  lib/crypto: arm/blake2b: Move to scoped ksimd API
  arm64/fpsimd: Allocate kernel mode FP/SIMD buffers on the stack
  arm64/fpu: Enforce task-context only for generic kernel mode FPU
  net/mlx5: Switch to more abstract scoped ksimd guard API on arm64
  arm64/xorblocks:  Switch to 'ksimd' scoped guard API
  crypto/arm64: sm4 - Switch to 'ksimd' scoped guard API
  crypto/arm64: sm3 - Switch to 'ksimd' scoped guard API
  crypto/arm64: sha3 - Switch to 'ksimd' scoped guard API
  crypto/arm64: polyval - Switch to 'ksimd' scoped guard API
  crypto/arm64: nhpoly1305 - Switch to 'ksimd' scoped guard API
  crypto/arm64: aes-gcm - Switch to 'ksimd' scoped guard API
  crypto/arm64: aes-blk - Switch to 'ksimd' scoped guard API
  crypto/arm64: aes-ccm - Switch to 'ksimd' scoped guard API
  raid6: Move to more abstract 'ksimd' guard API
  crypto: aegis128-neon - Move to more abstract 'ksimd' guard API
  crypto/arm64: sm4-ce-gcm - Avoid pointless yield of the NEON unit
  crypto/arm64: sm4-ce-ccm - Avoid pointless yield of the NEON unit
  crypto/arm64: aes-ce-ccm - Avoid pointless yield of the NEON unit
  lib/crc: Switch ARM and arm64 to 'ksimd' scoped guard API
  ...

The crypto/zstd module has a double-free bug that occurs when multiple
tfms are allocated and freed.

The issue happens because zstd_streams (per-CPU contexts) are freed in
zstd_exit() during every tfm destruction, rather than being managed at
the module level.  When multiple tfms exist, each tfm exit attempts to
free the same shared per-CPU streams, resulting in a double-free.

This leads to a stack trace similar to:

  BUG: Bad page state in process kworker/u16:1  pfn:106fd93
  page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x106fd93
  flags: 0x17ffffc0000000(node=0|zone=2|lastcpupid=0x1fffff)
  page_type: 0xffffffff()
  raw: 0017ffffc0000000 dead000000000100 dead000000000122 0000000000000000
  raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
  page dumped because: nonzero entire_mapcount
  Modules linked in: ...
  CPU: 3 UID: 0 PID: 2506 Comm: kworker/u16:1 Kdump: loaded Tainted: G    B
  Hardware name: ...
  Workqueue: btrfs-delalloc btrfs_work_helper
  Call Trace:
   <TASK>
   dump_stack_lvl+0x5d/0x80
   bad_page+0x71/0xd0
   free_unref_page_prepare+0x24e/0x490
   free_unref_page+0x60/0x170
   crypto_acomp_free_streams+0x5d/0xc0
   crypto_acomp_exit_tfm+0x23/0x50
   crypto_destroy_tfm+0x60/0xc0
   ...

Change the lifecycle management of zstd_streams to free the streams only
once during module cleanup.

Fixes: f5ad93ffb541 ("crypto: zstd - convert to acomp")
Cc: stable@vger.kernel.org
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The partial block length returned by a block-only driver should
not be passed up to the caller since ahash itself deals with the
partial block data.

Set err to zero in ahash_update_finish if it was positive.

Reported-by: T Pratham <t-pratham@ti.com>
Tested-by: T Pratham <t-pratham@ti.com>
Fixes: 9d7a0ab1c753 ("crypto: ahash - Handle partial blocks in API")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Restore the partial block buffer in crypto_ahash_import by copying
it.  Check whether the partial block buffer exceeds the maximum
size and return -EOVERFLOW if it does.

Zero the partial block buffer in crypto_ahash_import_core.

Reported-by: T Pratham <t-pratham@ti.com>
Tested-by: T Pratham <t-pratham@ti.com>
Fixes: 9d7a0ab1c753 ("crypto: ahash - Handle partial blocks in API")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The ctx array in struct sdesc is never used.  Delete it as it's
bogus since the previous member ends with a flexible array.

Reported-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Ever since commit da7f033ddc9f ("crypto: cryptomgr - Add test
infrastructure"), the DES test suite has tested only one of the four
weak keys and none of the twelve semi-weak keys.

DES has four weak keys and twelve semi-weak keys, and the kernel's DES
implementation correctly detects and rejects all of these keys when the
CRYPTO_TFM_REQ_FORBID_WEAK_KEYS flag is set. However, only a single weak
key was being tested. Add tests for all 16 weak and semi-weak keys.

While DES is deprecated, it is still used in some legacy protocols, and
weak/semi-weak key detection should be tested accordingly.

Tested on arm64 with cryptographic self-tests.

Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This reverts commit 0f8d42bf128d349ad490e87d5574d211245e40f1, with the
memcpy_sglist() part dropped.

Now that memcpy_sglist() no longer uses the skcipher_walk code, the
skcipher_walk code can be moved back to where it belongs.

Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The original implementation of memcpy_sglist() was broken because it
didn't handle scatterlists that describe exactly the same memory, which
is a case that many callers rely on.  The current implementation is
broken too because it calls the skcipher_walk functions which can fail.
It ignores any errors from those functions.

Fix it by replacing it with a new implementation written from scratch.
It always succeeds.  It's also a bit faster, since it avoids the
overhead of skcipher_walk.  skcipher_walk includes a lot of
functionality (such as alignmask handling) that's irrelevant here.

Reported-by: Colin Ian King <coking@nvidia.com>
Closes: https://lore.kernel.org/r/20251114122620.111623-1-coking@nvidia.com
Fixes: 131bdceca1f0 ("crypto: scatterwalk - Add memcpy_sglist")
Fixes: 0f8d42bf128d ("crypto: scatterwalk - Move skcipher walk and use it for memcpy_sglist")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>