linux-toradex.git/drivers/Makefile, branch tegra-10.7.1

switch: switch class and GPIO drivers.

2010-02-04T05:27:14+00:00

switch: Export symbol switch_set_state.

Signed-off-by: Mike Lockwood 

switch: gpio: Don't call request_irq with interrupts disabled

Signed-off-by: Arve Hjønnevåg 

switch: Use device_create instead of device_create_drvdata.

device_create_drvdata is obsolete.

Signed-off-by: Arve Hjønnevåg 

switch_gpio: Add missing #include 

Signed-off-by: Mike Lockwood

Merge git://git.infradead.org/mtd-2.6

2009-09-23T17:07:49+00:00

* git://git.infradead.org/mtd-2.6: (58 commits)
  mtd: jedec_probe: add PSD4256G6V id
  mtd: OneNand support for Nomadik 8815 SoC (on NHK8815 board)
  mtd: nand: driver for Nomadik 8815 SoC (on NHK8815 board)
  m25p80: Add Spansion S25FL129P serial flashes
  jffs2: Use SLAB_HWCACHE_ALIGN for jffs2_raw_{dirent,inode} slabs
  mtd: sh_flctl: register sh_flctl using platform_driver_probe()
  mtd: nand: txx9ndfmc: transfer 512 byte at a time if possible
  mtd: nand: fix tmio_nand ecc correction
  mtd: nand: add __nand_correct_data helper function
  mtd: cfi_cmdset_0002: add 0xFF intolerance for M29W128G
  mtd: inftl: fix fold chain block number
  mtd: jedec: fix compilation problem with I28F640C3B definition
  mtd: nand: fix ECC Correction bug for SMC ordering for NDFC driver
  mtd: ofpart: Check availability of reg property instead of name property
  driver/Makefile: Initialize "mtd" and "spi" before "net"
  mtd: omap: adding DMA mode support in nand prefetch/post-write
  mtd: omap: add support for nand prefetch-read and post-write
  mtd: add nand support for w90p910 (v2)
  mtd: maps: add mtd-ram support to physmap_of
  mtd: pxa3xx_nand: add single-bit error corrections reporting
  ...

driver/Makefile: Initialize "mtd" and "spi" before "net"

2009-09-19T20:21:10+00:00

On TI's da850/omap-l138 EVM, MAC address is stored in SPI flash.

This patch changes the initialization sequence of the drivers
by moving mtd and spi ahead of net in drivers/Makefile thereby
enabling da850/omap-l138 ethernet driver to read the MAC address
while booting.

Signed-off-by: Sudhakar Rajashekhara 
Signed-off-by: David Woodhouse

SFI: add platform-independent core support

2009-08-28T23:57:33+00:00

drivers/sfi/sfi_core.c contains the generic SFI implementation.
It has a private header, sfi_core.h, for its own use and the
private use of future files in drivers/sfi/

Signed-off-by: Feng Tang 
Signed-off-by: Len Brown

LinuxPPS: core support

2009-06-18T20:04:04+00:00

This patch adds the kernel side of the PPS support currently named
"LinuxPPS".

PPS means "pulse per second" and a PPS source is just a device which
provides a high precision signal each second so that an application can
use it to adjust system clock time.

Common use is the combination of the NTPD as userland program with a GPS
receiver as PPS source to obtain a wallclock-time with sub-millisecond
synchronisation to UTC.

To obtain this goal the userland programs shoud use the PPS API
specification (RFC 2783 - Pulse-Per-Second API for UNIX-like Operating
Systems, Version 1.0) which in part is implemented by this patch.  It
provides a set of chars devices, one per PPS source, which can be used to
get the time signal.  The RFC's functions can be implemented by accessing
to these char devices.

Signed-off-by: Rodolfo Giometti 
Cc: David Woodhouse 
Cc: Greg KH 
Cc: Randy Dunlap 
Cc: Kay Sievers 
Acked-by: Alan Cox 
Cc: Michael Kerrisk 
Cc: Christoph Hellwig 
Cc: Roman Zippel 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

drivers: add support for the TI VLYNQ bus

2009-06-17T02:47:52+00:00

Add support for the TI VLYNQ high-speed, serial and packetized bus.

This bus allows external devices to be connected to the System-on-Chip and
appear in the main system memory just like any memory mapped peripheral.
It is widely used in TI's networking and multimedia SoC, including the AR7
SoC.

Signed-off-by: Eugene Konev 
Signed-off-by: Florian Fainelli 
Cc: Ralf Baechle 
Cc: Alan Cox 
Cc: Greg KH 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

ieee802154: add simple HardMAC driver sample

2009-06-09T12:25:34+00:00

fakehard is a really simple driver implementing only necessary
callbacks and serves the role of an example of driver for HardMAC
IEEE 802.15.4 device.

Signed-off-by: Dmitry Eremin-Solenikov 
Signed-off-by: Sergey Lapin 
Signed-off-by: David S. Miller

V4L/DVB (11561a): move media after i2c

2009-04-29T18:41:13+00:00

Currently drivers/media drivers are linked very early - directly after
base, block, misc, and mfd and before ata, scsi, ide, input, firewire,
usb, and i2c. This breaks static build of video4linux drivers, that use
generic CPU i2c adapter drivers and the v4l2-subdev subsystem, because
during video4linux probing the v4l2-subdev core requires a struct
i2c_adapter context, which cannot be satisfied before the i2c subsystem is
initialised. Moving drivers/media after drivers/i2c fixes this problem.

The best way to trigger action is by submitting a patch:-) So, let's see
what comes out of it - on the one hand I don't see any reason why media
has to be linked this early, and nobody was able to give me one yesterday
as this problem has been discussed on linux-media, OTOH, maybe indeed it
would be better to move i2c the whole way up above media, but that'd be
much bigger of a change, I think.
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Signed-off-by: Guennadi Liakhovetski 
Acked-by: Jean Delvare 
Signed-off-by: Mauro Carvalho Chehab

ide/net: flip the order of SATA and network init

2009-03-28T20:06:16+00:00

this patch flips the order in which sata and network drivers are initialized.

SATA probing takes quite a bit of time, and with the asynchronous infrastructure
other drivers that run after it can execute in parallel. Network drivers do tend
to take some real time talking to the hardware, so running these later is
a good thing (the sata probe then runs concurrent)

This saves about 15% of my kernels boot time.

Both Dave and Jeff acked this patch and suggested it should go via the async
tree.

Signed-off-by: Arjan van de Ven 
Acked-by: David S. Miller 
Acked-by: Jeff Garzik

Merge branch 'drivers-platform' into release

2009-01-09T09:56:56+00:00

Conflicts:
	drivers/misc/Kconfig

Signed-off-by: Len Brown