commit d3e13ff3c1aa2403d9a5f371baac088daeb8f56d upstream.

Fix a return value (which should be a negative error code) and a
memory leak (the list allocated by acpi_dev_get_resources() needs
to be freed on ioremap() errors too) in acpi_lpss_create_device()
introduced by commit 4483d59e29fe 'ACPI / LPSS: check the result
of ioremap()'.

Fixes: 4483d59e29fe 'ACPI / LPSS: check the result of ioremap()'
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit 7d78cbefaa (serial: 8250_dw: add ability to handle
the peripheral clock) introduces handling for a second clk
to 8250_dw.c which is the driver also for LPSS UART. The
second clk forces us to provide identifier (con_id) for the
clkdev we create.

This fixes an issue where 8250_dw.c is getting the same
handler for both clocks.

Fixes: 7d78cbefaa (serial: 8250_dw: add ability to handle the peripheral clock)
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: 3.17+ <stable@vger.kernel.org> # 3.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

* acpi-ec:
  ACPI / EC: Remove non-standard log emphasis

* acpi-soc:
  ACPI / LPSS: Deassert resets for SPI host controllers on Braswell
  ACPI / LPSS: Always disable I2C host controllers
  Revert "ACPI / LPSS: Remove non-existing clock control from Intel Lynxpoint I2C"

* acpi-video:
  ACPI / video: Disable native backlight on Samsung Series 9 laptops

* acpi-resources:
  ACPI / resources: Change pr_info() to pr_debug() for debug information

On some Braswell systems BIOS leaves resets for SPI host controllers
active. This prevents the SPI driver from transferring messages on wire.

Fix this in similar way that we do for I2C already by deasserting resets
for the SPI host controllers.

Reported-by: Yang A Fang <yang.a.fang@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: 3.17+ <stable@vger.kernel.org> # 3.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

On Baytrail and Braswell the BIOS might leave the I2C host controllers
enabled, probably because it uses them for its own purposes. This is fine
in normal cases because the I2C driver will disable the hardware when it
is probed anyway.

However, in case of suspend to disk it is different story. If the driver
happens to be compiled as a module the boot kernel never loads the driver
thus leaving host controllers enabled upon loading the hibernation image.

The I2C host controller interrupt mask register has default value of 0x8ff,
in other words it has most of the interrupts unmasked. When combined with
the fact that the host controller is enabled, the driver immediately starts
getting interrupts even before its resume hook is called (once IO-APIC is
resumed). Since the driver is not prepared for this it will crash the
kernel due to NULL pointer derefence because dev->msgs is NULL.

Unfortunately we were not able to get full backtrace to from the console
which could be reproduced here.

In order to fix this even when the driver is compiled as module, we disable
the I2C host controllers in byt_i2c_setup() before devices are created.

Reported-by: Yu Chen <yu.c.chen@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: 3.17+ <stable@vger.kernel.org> # 3.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Revert commit b893e80e3147 ("ACPI / LPSS: Remove non-existing clock control
from Intel Lynxpoint I2C") because it causes touchpad to not load on Dell
XPS13.

Regression is a clear indication that not only some early prototype version
of Lynxpoint I2C but also newer versions can be doing clock gating even
documentation does not state it.

Therefore it is best to revert since this clock gating haven't caused known
issues on those Lynxpoint version which don't do clock gating.

Reported-by-and-tested-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

* acpi-resources: (23 commits)
  Merge branch 'pci/host-generic' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci into acpi-resources
  x86/irq, ACPI: Implement ACPI driver to support IOAPIC hotplug
  ACPI: Add interfaces to parse IOAPIC ID for IOAPIC hotplug
  x86/PCI: Refine the way to release PCI IRQ resources
  x86/PCI/ACPI: Use common ACPI resource interfaces to simplify implementation
  x86/PCI: Fix the range check for IO resources
  PCI: Use common resource list management code instead of private implementation
  resources: Move struct resource_list_entry from ACPI into resource core
  ACPI: Introduce helper function acpi_dev_filter_resource_type()
  ACPI: Add field offset to struct resource_list_entry
  ACPI: Translate resource into master side address for bridge window resources
  ACPI: Return translation offset when parsing ACPI address space resources
  ACPI: Enforce stricter checks for address space descriptors
  ACPI: Set flag IORESOURCE_UNSET for unassigned resources
  ACPI: Normalize return value of resource parser functions
  ACPI: Fix a bug in parsing ACPI Memory24 resource
  ACPI: Add prefetch decoding to the address space parser
  ACPI: Move the window flag logic to the combined parser
  ACPI: Unify the parsing of address_space and ext_address_space
  ACPI: Let the parser return false for disabled resources
  ...

Currently ACPI, PCI and pnp all implement the same resource list
management with different data structure. We need to transfer from
one data structure into another when passing resources from one
subsystem into another subsystem. So move struct resource_list_entry
from ACPI into resource core and rename it as resource_entry,
then it could be reused by different subystems and avoid the data
structure conversion.

Introduce dedicated header file resource_ext.h instead of embedding
it into ioport.h to avoid header file inclusion order issues.

Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Revert commit 6c17ee44d524 (ACPI / LPSS: introduce a 'proxy' device
to power on LPSS for DMA), as it introduced registration and probe
ordering problems between devices on the LPSS that may lead to full
hard system hang on boot in some cases.