The _BIX method returns extended battery info as a package.
According the ACPI spec (ACPI 5, Section 10.2.2.2), the first member
of that package should be "Revision".  However, the current ACPI
battery driver treats the first member as "Power Unit" which should
be the second member.  This causes the result of _BIX return data
parsing to be incorrect.

Fix this by adding a new member called 'revision' to struct
acpi_battery and adding the offsetof() information on it to
extended_info_offsets[] as the first row.

[rjw: Changelog]
Reported-and-tested-by: Jan Hoffmann <jan.christian.hoffmann@gmail.com>
References: http://bugzilla.kernel.org/show_bug.cgi?id=60519
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Cc: 2.6.34+ <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Add or remove spaces that give errors or warnings from checkpatch.pl.

Signed-off-by: Nicholas Mazzuca <nicholas@mazzucastuff.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull VFS updates from Al Viro,

Misc cleanups all over the place, mainly wrt /proc interfaces (switch
create_proc_entry to proc_create(), get rid of the deprecated
create_proc_read_entry() in favor of using proc_create_data() and
seq_file etc).

7kloc removed.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits)
  don't bother with deferred freeing of fdtables
  proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h
  proc: Make the PROC_I() and PDE() macros internal to procfs
  proc: Supply a function to remove a proc entry by PDE
  take cgroup_open() and cpuset_open() to fs/proc/base.c
  ppc: Clean up scanlog
  ppc: Clean up rtas_flash driver somewhat
  hostap: proc: Use remove_proc_subtree()
  drm: proc: Use remove_proc_subtree()
  drm: proc: Use minor->index to label things, not PDE->name
  drm: Constify drm_proc_list[]
  zoran: Don't print proc_dir_entry data in debug
  reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show()
  proc: Supply an accessor for getting the data from a PDE's parent
  airo: Use remove_proc_subtree()
  rtl8192u: Don't need to save device proc dir PDE
  rtl8187se: Use a dir under /proc/net/r8180/
  proc: Add proc_mkdir_data()
  proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h}
  proc: Move PDE_NET() to fs/proc/proc_net.c
  ...

The only part of proc_dir_entry the code outside of fs/proc
really cares about is PDE(inode)->data.  Provide a helper
for that; static inline for now, eventually will be moved
to fs/proc, along with the knowledge of struct proc_dir_entry
layout.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

This patch fixes following compiler warning when build via make W=1:

drivers/acpi/battery.c:149:52: warning: no previous prototype for ‘acpi_battery_present’ [-Wmissing-prototypes]

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The second argument of ACPI driver .remove() operation is only used
by the ACPI processor driver and the value passed to that driver
through it is always available from the given struct acpi_device
object's removal_type field.  For this reason, the second ACPI driver
.remove() argument is in fact useless, so drop it.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jiang Liu <jiang.liu@huawei.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>

Add a quirk to correctly report battery capacity on 2010 and 2011
Lenovo Thinkpad models.

The affected models that I tested (x201, t410, t410s, and x220)
exhibit a problem where, when battery capacity reporting unit is mAh,
the values being reported are wrong.  Pre-2010 and 2012 models appear
to always report in mWh and are thus unaffected.  Also, in mid-2012
Lenovo issued a BIOS update for the 2011 models that fixes the issue
(tested on x220 with a post-1.29 BIOS).  No such update is available
for the 2010 models, so those still need this patch.

Problem description: for some reason, the affected Thinkpads switch
the reporting unit between mAh and mWh; generally, mAh is used when a
laptop is plugged in and mWh when it's unplugged, although a
suspend/resume or rmmod/modprobe is needed for the switch to take
effect.  The values reported in mAh are *always* wrong.  This does
not appear to be a kernel regression; I believe that the values were
never reported correctly.  I tested back to kernel 2.6.34, with
multiple machines and BIOS versions.

Simply plugging a laptop into mains before turning it on is enough to
reproduce the problem.  Here's a sample /proc/acpi/battery/BAT0/info
from Thinkpad x220 (before a BIOS update) with a 4-cell battery:

present:                 yes
design capacity:         2886 mAh
last full capacity:      2909 mAh
battery technology:      rechargeable
design voltage:          14800 mV
design capacity warning: 145 mAh
design capacity low:     13 mAh
cycle count:              0
capacity granularity 1:  1 mAh
capacity granularity 2:  1 mAh
model number:            42T4899
serial number:           21064
battery type:            LION
OEM info:                SANYO

Once the laptop switches the unit to mWh (unplug from mains, suspend,
resume), the output changes to:

present:                 yes
design capacity:         28860 mWh
last full capacity:      29090 mWh
battery technology:      rechargeable
design voltage:          14800 mV
design capacity warning: 1454 mWh
design capacity low:     200 mWh
cycle count:              0
capacity granularity 1:  1 mWh
capacity granularity 2:  1 mWh
model number:            42T4899
serial number:           21064
battery type:            LION
OEM info:                SANYO

Can you see how the values for "design capacity", etc., differ by a
factor of 10 instead of 14.8 (the design voltage of this battery)?
On the battery itself it says: 14.8V, 1.95Ah, 29Wh, so clearly the
values reported in mWh are correct and the ones in mAh are not.

My guess is that this problem has been around ever since those
machines were released, but because the most common Thinkpad
batteries are rated at 10.8V, the error (8%) is small enough that it
simply hasn't been noticed or at least nobody could be bothered to
look into it.

My patch works around the problem by adjusting the incorrectly
reported mAh values by "10000 / design_voltage".  The patch also has
code to figure out if it should be activated or not.  It only
activates on Lenovo Thinkpads, only when the unit is mAh, and, as an
extra precaution, only when the battery capacity reported through
ACPI does not match what is reported through DMI (I've never
encountered a machine where the first two conditions would be true
but the last would not, but better safe than sorry).

I've been using this patch for close to a year on several systems
without any problems.

References: https://bugzilla.kernel.org/show_bug.cgi?id=41062
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

According to compiler warnings, several suspend/resume functions
in ACPI drivers are not used for CONFIG_PM_SLEEP unset, so add
#ifdefs to prevent them from being built in that case.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

Pull ACPI & power management update from Len Brown:
 "Re-write of the turbostat tool.
     lower overhead was necessary for measuring very large system when
     they are very idle.

  IVB support in intel_idle
     It's what I run on my IVB, others should be able to also:-)

  ACPICA core update
     We have found some bugs due to divergence between Linux and the
     upstream ACPICA base.  Most of these patches are to reduce that
     divergence to reduce the risk of future bugs.

  Some cpuidle updates, mostly for non-Intel
     More will be coming, as they depend on this part.

  Some thermal management changes needed by non-ACPI systems.

  Some _OST (OS Status Indication) updates for hot ACPI hot-plug."

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (51 commits)
  Thermal: Documentation update
  Thermal: Add Hysteresis attributes
  Thermal: Make Thermal trip points writeable
  ACPI/AC: prevent OOPS on some boxes due to missing check power_supply_register() return value check
  tools/power: turbostat: fix large c1% issue
  tools/power: turbostat v2 - re-write for efficiency
  ACPICA: Update to version 20120711
  ACPICA: AcpiSrc: Fix some translation issues for Linux conversion
  ACPICA: Update header files copyrights to 2012
  ACPICA: Add new ACPI table load/unload external interfaces
  ACPICA: Split file: tbxface.c -> tbxfload.c
  ACPICA: Add PCC address space to space ID decode function
  ACPICA: Fix some comment fields
  ACPICA: Table manager: deploy new firmware error/warning interfaces
  ACPICA: Add new interfaces for BIOS(firmware) errors and warnings
  ACPICA: Split exception code utilities to a new file, utexcep.c
  ACPI: acpi_pad: tune round_robin_time
  ACPICA: Update to version 20120620
  ACPICA: Add support for implicit notify on multiple devices
  ACPICA: Update comments; no functional change
  ...

Make the ACPI battery driver define its PM callbacks through
a struct dev_pm_ops object rather than by using legacy PM hooks
in struct acpi_device_ops.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>