linux-toradex.git/drivers/acpi/bus.c, branch v3.4.45 Linux kernel for Apalis and Colibri modules ACPI: run _OSC after ACPI_FULL_INITIALIZATION 2012-10-12T20:38:37+00:00 Lin Ming ming.m.lin@intel.com 2012-07-16T08:30:21+00:00 2006e6f75e7cb88e0508eeff066834c847ce91b3 commit fc54ab72959edbf229b65ac74b2f122d799ca002 upstream. The _OSC method may exist in module level code, so it must be called after ACPI_FULL_INITIALIZATION On some new platforms with Zero-Power-Optical-Disk-Drive (ZPODD) support, this fix is necessary to save power. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Tested-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit fc54ab72959edbf229b65ac74b2f122d799ca002 upstream.

The _OSC method may exist in module level code,
so it must be called after ACPI_FULL_INITIALIZATION

On some new platforms with Zero-Power-Optical-Disk-Drive (ZPODD)
support, this fix is necessary to save power.

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Tested-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ACPI / PCI / PM: Fix device PM regression related to D3hot/D3cold 2012-05-17T23:16:16+00:00 Rafael J. Wysocki rjw@sisk.pl 2012-05-17T22:39:35+00:00 5c7dd710f691d1b44c39e32d2f05b4286ff51f99 Commit 1cc0c998fdf2 ("ACPI: Fix D3hot v D3cold confusion") introduced a bug in __acpi_bus_set_power() and changed the behavior of acpi_pci_set_power_state() in such a way that it generally doesn't work as expected if PCI_D3hot is passed to it as the second argument. First off, if ACPI_STATE_D3 (equal to ACPI_STATE_D3_COLD) is passed to __acpi_bus_set_power() and the explicit_set flag is set for the D3cold state, the function will try to execute AML method called "_PS4", which doesn't exist. Fix this by adding a check to ensure that the name of the AML method to execute for transitions to ACPI_STATE_D3_COLD is correct in __acpi_bus_set_power(). Also make sure that the explicit_set flag for ACPI_STATE_D3_COLD will be set if _PS3 is present and modify acpi_power_transition() to avoid accessing power resources for ACPI_STATE_D3_COLD, because they don't exist. Second, if PCI_D3hot is passed to acpi_pci_set_power_state() as the target state, the function will request a transition to ACPI_STATE_D3_HOT instead of ACPI_STATE_D3. However, ACPI_STATE_D3_HOT is now only marked as supported if the _PR3 AML method is defined for the given device, which is rare. This causes problems to happen on systems where devices were successfully put into ACPI D3 by pci_set_power_state(PCI_D3hot) which doesn't work now. In particular, some unused graphics adapters are not turned off as a result. To fix this issue restore the old behavior of acpi_pci_set_power_state(), which is to request a transition to ACPI_STATE_D3 (equal to ACPI_STATE_D3_COLD) if either PCI_D3hot or PCI_D3cold is passed to it as the argument. This approach is not ideal, because generally power should not be removed from devices if PCI_D3hot is the target power state, but since this behavior is relied on, we have no choice but to restore it at the moment and spend more time on designing a better solution in the future. References: https://bugzilla.kernel.org/show_bug.cgi?id=43228 Reported-by: rocko <rockorequin@hotmail.com> Reported-by: Cristian Rodríguez <crrodriguez@opensuse.org> Reported-and-tested-by: Peter <lekensteyn@gmail.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
Commit 1cc0c998fdf2 ("ACPI: Fix D3hot v D3cold confusion") introduced a
bug in __acpi_bus_set_power() and changed the behavior of
acpi_pci_set_power_state() in such a way that it generally doesn't work
as expected if PCI_D3hot is passed to it as the second argument.

First off, if ACPI_STATE_D3 (equal to ACPI_STATE_D3_COLD) is passed to
__acpi_bus_set_power() and the explicit_set flag is set for the D3cold
state, the function will try to execute AML method called "_PS4", which
doesn't exist.

Fix this by adding a check to ensure that the name of the AML method
to execute for transitions to ACPI_STATE_D3_COLD is correct in
__acpi_bus_set_power().  Also make sure that the explicit_set flag
for ACPI_STATE_D3_COLD will be set if _PS3 is present and modify
acpi_power_transition() to avoid accessing power resources for
ACPI_STATE_D3_COLD, because they don't exist.

Second, if PCI_D3hot is passed to acpi_pci_set_power_state() as the
target state, the function will request a transition to
ACPI_STATE_D3_HOT instead of ACPI_STATE_D3.  However,
ACPI_STATE_D3_HOT is now only marked as supported if the _PR3 AML
method is defined for the given device, which is rare.  This causes
problems to happen on systems where devices were successfully put
into ACPI D3 by pci_set_power_state(PCI_D3hot) which doesn't work
now.  In particular, some unused graphics adapters are not turned
off as a result.

To fix this issue restore the old behavior of
acpi_pci_set_power_state(), which is to request a transition to
ACPI_STATE_D3 (equal to ACPI_STATE_D3_COLD) if either PCI_D3hot or
PCI_D3cold is passed to it as the argument.

This approach is not ideal, because generally power should not
be removed from devices if PCI_D3hot is the target power state,
but since this behavior is relied on, we have no choice but to
restore it at the moment and spend more time on designing a
better solution in the future.

References: https://bugzilla.kernel.org/show_bug.cgi?id=43228
Reported-by: rocko <rockorequin@hotmail.com>
Reported-by: Cristian Rodríguez <crrodriguez@opensuse.org>
Reported-and-tested-by: Peter <lekensteyn@gmail.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ACPI: export acpi_kobj 2012-03-30T08:09:05+00:00 Matthew Garrett mjg@redhat.com 2012-01-31T18:19:19+00:00 f2d4753fbd4d15c65d6ba48167aa83916ddbe518 Drivers may wish to add entries to /sys/firmware/acpi, so export acpi_kobj in order to let them do that. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com> 
Drivers may wish to add entries to /sys/firmware/acpi, so export acpi_kobj
in order to let them do that.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
ACPI: Drop ACPI_NO_HARDWARE_INIT 2011-11-07T01:32:31+00:00 Rafael J. Wysocki rjw@sisk.pl 2011-11-06T13:20:42+00:00 4505a2015f4c4b2f21137cc3a6b7400b0f3e073e ACPI_NO_HARDWARE_INIT is only used by acpi_early_init() and acpi_bus_init() when calling acpi_enable_subsystem(), but acpi_enable_subsystem() doesn't check that flag, so it can be dropped. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com> 
ACPI_NO_HARDWARE_INIT is only used by acpi_early_init() and
acpi_bus_init() when calling acpi_enable_subsystem(), but
acpi_enable_subsystem() doesn't check that flag, so it can be
dropped.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
ACPI: APEI build fix 2011-08-03T15:15:59+00:00 Len Brown len.brown@intel.com 2011-07-16T22:14:21+00:00 a7e09d450b2e0b068e850d103b6ee1af537d1910 as GHES is optional... When # CONFIG_ACPI_APEI_GHES is not set: (.init.text+0x4c22): undefined reference to `ghes_disable' Reported-by: Randy Dunlap <rdunlap@xenotime.net> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Len Brown <len.brown@intel.com> 
as GHES is optional...

When # CONFIG_ACPI_APEI_GHES is not set:

(.init.text+0x4c22): undefined reference to `ghes_disable'

Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Len Brown <len.brown@intel.com>
ACPI, APEI, Add APEI bit support in generic _OSC call 2011-07-14T03:38:20+00:00 Huang Ying ying.huang@intel.com 2011-07-13T05:14:20+00:00 eccddd32ced0df8f9130024157bf8d37df860d76 In APEI firmware first mode, hardware error is reported by hardware to firmware firstly, then firmware reports the error to Linux in a GHES error record via POLL/SCI/IRQ/NMI etc. This may result in some issues if OS has no full APEI support. So some firmware implementation will work in a back-compatible mode by default. Where firmware will only notify OS in old-fashion, without GHES record. For example, for a fatal hardware error, only NMI is signaled, no GHES record. To gain full APEI power on these machines, APEI bit in generic _OSC call can be specified to tell firmware that Linux has full APEI support. This patch adds the APEI bit support in generic _OSC call. Signed-off-by: Huang Ying <ying.huang@intel.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Reviewed-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com> 
In APEI firmware first mode, hardware error is reported by hardware to
firmware firstly, then firmware reports the error to Linux in a GHES
error record via POLL/SCI/IRQ/NMI etc.

This may result in some issues if OS has no full APEI support.  So
some firmware implementation will work in a back-compatible mode by
default.  Where firmware will only notify OS in old-fashion, without
GHES record.  For example, for a fatal hardware error, only NMI is
signaled, no GHES record.

To gain full APEI power on these machines, APEI bit in generic _OSC
call can be specified to tell firmware that Linux has full APEI
support.  This patch adds the APEI bit support in generic _OSC call.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
ACPI: Add D3 cold state 2011-05-29T06:21:08+00:00 Lin Ming ming.m.lin@intel.com 2011-05-04T14:56:43+00:00 28c2103dad04dba29ba86e22dad5735db8f0e13c _SxW returns an Integer containing the lowest D-state supported in state Sx. If OSPM has not indicated that it supports _PR3, then the value “3” corresponds to D3. If it has indicated _PR3 support, the value “3” represents D3hot and the value “4” represents D3cold. Linux does set _OSC._PR3, so we should fix it to expect that _SxW can return 4. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Len Brown <len.brown@intel.com> 
_SxW returns an Integer containing the lowest D-state supported in state
Sx. If OSPM has not indicated that it supports _PR3, then the value “3”
corresponds to D3.  If it has indicated _PR3 support, the value “3”
represents D3hot and the value “4” represents D3cold.

Linux does set _OSC._PR3, so we should fix it to expect that _SxW can
return 4.

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Len Brown <len.brown@intel.com>
PM: Drop pm_flags that is not necessary 2011-03-14T23:43:16+00:00 Rafael J. Wysocki rjw@sisk.pl 2011-02-15T20:22:24+00:00 6831c6edc7b272a08dd2a6c71bb183a48fe98ae6 The variable pm_flags is used to prevent APM from being enabled along with ACPI, which would lead to problems. However, acpi_init() is always called before apm_init() and after acpi_init() has returned, it is known whether or not ACPI will be used. Namely, if acpi_disabled is not set after acpi_init() has returned, this means that ACPI is enabled. Thus, it is sufficient to check acpi_disabled in apm_init() to prevent APM from being enabled in parallel with ACPI. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Len Brown <len.brown@intel.com> 
The variable pm_flags is used to prevent APM from being enabled
along with ACPI, which would lead to problems.  However, acpi_init()
is always called before apm_init() and after acpi_init() has
returned, it is known whether or not ACPI will be used.  Namely, if
acpi_disabled is not set after acpi_init() has returned, this means
that ACPI is enabled.  Thus, it is sufficient to check acpi_disabled
in apm_init() to prevent APM from being enabled in parallel with
ACPI.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Len Brown <len.brown@intel.com>
PM / ACPI: Remove references to pm_flags from bus.c 2011-03-14T23:43:15+00:00 Rafael J. Wysocki rjw@sisk.pl 2011-02-10T23:04:52+00:00 cd51e61cf4e8b220da37dc35e9c2dc2dc258b4de If direct references to pm_flags are removed from drivers/acpi/bus.c, CONFIG_ACPI will not need to depend on CONFIG_PM any more. Make that happen. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Len Brown <len.brown@intel.com> 
If direct references to pm_flags are removed from drivers/acpi/bus.c,
CONFIG_ACPI will not need to depend on CONFIG_PM any more.  Make that
happen.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Len Brown <len.brown@intel.com>
ACPI / PM: Drop acpi_power_nocheck 2011-01-12T09:48:45+00:00 Rafael J. Wysocki rjw@sisk.pl 2010-12-11T22:45:30+00:00 53eac700b0df1fef8c957b9eedfd7f48120425e3 Since acpi_bus_set_power() should not use __acpi_bus_get_power() to update the device's device->power.state field before changing its power state (this may cause device->power.state to be inconsistent with the device power resources' reference counters), remove this call from it. In consequence, the acpi_power_nocheck variable is not necessary any more, so it can be dropped along with the DMI table used for setting that variable for HP Pavilion 05. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com> 
Since acpi_bus_set_power() should not use __acpi_bus_get_power() to
update the device's device->power.state field before changing its
power state (this may cause device->power.state to be inconsistent
with the device power resources' reference counters), remove this
call from it.  In consequence, the acpi_power_nocheck variable is not
necessary any more, so it can be dropped along with the DMI table
used for setting that variable for HP Pavilion 05.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>