Add Raptor Lake ACPI IDs for DPTF devices. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There is a comment in dptf_pch_fivr.c which seemingly was added under
the assumption that the PCH FIVR driver would be used on Tiger Lake
platforms, but support for Alder Lake has been udded to it by commit
38748bcb940e ("ACPI: DPTF: Support Alder Lake"), so update the
comment to cover a broader range of platforms by changing the device
ID mentioned by it to INTC10xx.
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
[ rjw: Subject and changelog rewrite ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some additional information is required for updating PCH FIVR values upon WiFi channel changes. New attributes added to the existing sysfs: fivr_switching_freq_mhz : Get the FIVR switching control frequency. Uses ACPI method GFCS. fivr_switching_fault_status: Read the FIVR switching frequency control fault status. Uses ACPI method GFFS. ssc_clock_info : Presents SSC (spread spectrum clock) information for EMI (Electro magnetic interference) control. Use ACPI method GEMI (refer to the description of GEMI method below). GFFS This ACPI method is used to read the FIVR switching frequency control fault status. Bits Description [0:0] Fault status when set to 1 [31:1] Reserved GFCS This ACPI method is used to read the FIVR switching control frequency. Bits Description [11:0] Actual Frequency = value * XTAL_FREQ / 128 [31:12] Reserved GEMI This ACPI method is used to read the programmed register value for EMI (Electro magnetic interference) control. Bits Description [7:0] Sets clock spectrum spread percentage: 0x00=0.2% , 0x3F=10% 1 LSB = 0.1% increase in spread (for settings 0x01 thru 0x1C) 1 LSB = 0.2% increase in spread (for settings 0x1E thru 0x3F) [8] When set to 1, enables spread spectrum clock [9] 0: Triangle mode. FFC frequency walks around the Fcenter in a linear fashion 1: Random walk mode. FFC frequency changes randomly within the SSC (Spread spectrum clock) range [10] 0: No white noise. 1: Add white noise to spread waveform [11] When 1, future writes are ignored. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The current assumption that methods to read PCH FIVR attributes will
return integer, is not correct. There is no good way to return integer
as negative numbers are also valid.
These read methods return a package of integers. The first integer returns
status, which is 0 on success and any other value for failure. When the
returned status is zero, then the second integer returns the actual value.
This change fixes this issue by replacing acpi_evaluate_integer() with
acpi_evaluate_object() and use acpi_extract_package() to extract results.
Fixes: 2ce6324eadb01 ("ACPI: DPTF: Add PCH FIVR participant driver")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 5.10+ <stable@vger.kernel.org> # 5.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add ACPI Device ID for DPTF battery participant for the Intel Jasper Lake (INT3532) and Tiger Lake (INTC1050) SoC based platforms. Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add Alder Lake ACPI IDs for DPTF devices. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add a Kconfig menu for Intel DPTF (Dynamic Platform and Thermal Framework), put both the existing participant drivers in it and set them to be built as modules by default. While at it, do a few assorted cleanups for a good measure. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: Borislav Petkov <bp@suse.de>
Change the names of DPTF participant drivers to adhere to the
sysfs file naming conventions (no spaces present in the name in
particular).
Fixes: 2ce6324eadb0 ("ACPI: DPTF: Add PCH FIVR participant driver")
Fixes: 6256ebd5daf9 ("ACPI / DPTF: Add DPTF power participant driver")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Borislav Petkov <bp@suse.de>
This driver adds support for Dynamic Platform and Thermal Framework (DPTF) PCH (Platform Controller Hub) FIVR (Fully Integrated Voltage Regulator) participant support. This participant is responsible for exposing platform telemetry and control for: freq_mhz_high_clock freq_mhz_low_clock These attributes are used to get and set PCH FIVR switching frequency for thermal and radio frequency interference mitigation. Refer to Documentation/ABI/testing/sysfs-platform-dptf for ABI details. ACPI methods description used in this driver: RFC0: This ACPI method to set PCH FIVR switching frequency when FIVR clock is 19.2MHz or 24MHz. The ACPI method takes a DWORD value. GFC0: This ACPI method to get PCH FIVR switching frequency when FIVR clock is 19.2MHz or 24MHz. RFC1: This ACPI method to set PCH FIVR switching frequency when FIVR clock is 38.4MHz. The ACPI method takes a DWORD value. GFC1: This ACPI method to get PCH FIVR switching frequency when FIVR clock is 38.4MHz. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add DPTF battery participant ACPI ID for platforms based on the Intel TigerLake SoC. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>