* acpi-property: ACPI / property: Switch to bitmap_zalloc() * acpi-sbs: ACPI / SBS: Fix rare oops when removing modules ACPI / SBS: Fix GPE storm on recent MacBookPro's
Since acpi_os_get_timer() may be called after the timer subsystem has been suspended, use the jiffies counter instead of ktime_get(). This patch avoids that the following warning is reported during hibernation: WARNING: CPU: 0 PID: 612 at kernel/time/timekeeping.c:751 ktime_get+0x116/0x120 RIP: 0010:ktime_get+0x116/0x120 Call Trace: acpi_os_get_timer+0xe/0x30 acpi_ds_exec_begin_control_op+0x175/0x1de acpi_ds_exec_begin_op+0x2c7/0x39a acpi_ps_create_op+0x573/0x5e4 acpi_ps_parse_loop+0x349/0x1220 acpi_ps_parse_aml+0x25b/0x6da acpi_ps_execute_method+0x327/0x41b acpi_ns_evaluate+0x4e9/0x6f5 acpi_ut_evaluate_object+0xd9/0x2f2 acpi_rs_get_method_data+0x8f/0x114 acpi_walk_resources+0x122/0x1b6 acpi_pci_link_get_current.isra.2+0x157/0x280 acpi_pci_link_set+0x32f/0x4a0 irqrouter_resume+0x58/0x80 syscore_resume+0x84/0x380 hibernation_snapshot+0x20c/0x4f0 hibernate+0x22d/0x3a6 state_store+0x99/0xa0 kobj_attr_store+0x37/0x50 sysfs_kf_write+0x87/0xa0 kernfs_fop_write+0x1a5/0x240 __vfs_write+0xd2/0x410 vfs_write+0x101/0x250 ksys_write+0xab/0x120 __x64_sys_write+0x43/0x50 do_syscall_64+0x71/0x220 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 164a08cee135 (ACPICA: Dispatcher: Introduce timeout mechanism for infinite loop detection) Reported-by: Fengguang Wu <fengguang.wu@intel.com> References: https://lists.01.org/pipermail/lkp/2018-April/008406.html Signed-off-by: Bart Van Assche <bvanassche@acm.org> Cc: 4.16+ <stable@vger.kernel.org> # 4.16+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There was a small race when removing the sbshc module where smbus_alarm() had queued acpi_smbus_callback() for deferred execution but it hadn't been run yet, so that when it did run hc had been freed and the module unloaded, resulting in an invalid paging request. A similar race existed when removing the sbs module with regards to acpi_sbs_callback() (which is called from acpi_smbus_callback()). We therefore need to ensure no callbacks are pending or executing before the cleanups are done and the modules are removed. Signed-off-by: Ronald Tschalär <ronald@innovation.ch> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Sometimes memory resource may be overlapping with
SystemMemory Operation Region by design, for example if the
memory region is used as a mailbox for communication with a
firmware in the system. One occasion of such mailboxes is
USB Type-C Connector System Software Interface (UCSI).
With regions like that, it is important that the driver is
able to map the memory with the requirements it has. For
example, the driver should be allowed to map the memory as
non-cached memory. However, if the operation region has been
accessed before the driver has mapped the memory, the memory
has been marked as write-back by the time the driver is
loaded. That means the driver will fail to map the memory
if it expects non-cached memory.
To work around the problem, introducing helper that the
drivers can use to temporarily deactivate (unmap)
SystemMemory Operation Regions that overlap with their
IO memory.
Fixes: 8243edf44152 ("usb: typec: ucsi: Add ACPI driver")
Cc: stable@vger.kernel.org
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add an architecture specific function to get the address of the RSDP table. Per default it will just return 0 indicating falling back to the current mechanism. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: boris.ostrovsky@oracle.com Cc: lenb@kernel.org Cc: linux-acpi@vger.kernel.org Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/20180219100906.14265-2-jgross@suse.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add functionality to read LPIT table, which provides: - Sysfs interface to read residency counters via /sys/devices/system/cpu/cpuidle/low_power_idle_cpu_residency_us /sys/devices/system/cpu/cpuidle/low_power_idle_system_residency_us Here the count "low_power_idle_cpu_residency_us" shows the time spent by CPU package in low power state. This is read via MSR interface, which points to MSR for PKG C10. Here the count "low_power_idle_system_residency_us" show the count the system was in low power state. This is read via MMIO interface. This is mapped to SLP_S0 residency on modern Intel systems. This residency is achieved only when CPU is in PKG C10 and all functional blocks are in low power state. It is possible that none of the above counters present or anyone of the counter present or all counters present. For example: On my Kabylake system both of the above counters present. After suspend to idle these counts updated and prints: 6916179 6998564 This counter can be read by tools like turbostat to display. Or it can be used to debug, if modern systems are reaching desired low power state. - Provides an interface to read residency counter memory address This address can be used to get the base address of PMC memory mapped IO. This is utilized by intel_pmc_core driver to print more debug information. In addition, to avoid code duplication to read iomem, removed the read of iomem from acpi_os_read_memory() in osl.c and made a common function acpi_os_read_iomem(). This new function is used for reading iomem in in both osl.c and acpi_lpit.c. Link: http://www.uefi.org/sites/default/files/resources/Intel_ACPI_Low_Power_S0_Idle.pdf Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit ba665dc8e20d9f7730466a659564dd6c557a6cbc In Linux, para-virtualization implmentation hooks critical register writes to prevent real hardware operations. This increases divergences when the sleep registers are cracked in Linux resident ACPICA. This patch tries to introduce a single OSL to reduce the divergences. Link: https://github.com/acpica/acpica/commit/ba665dc8 Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This was entirely automated, using the script by Al:
PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
$(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)
to do the replacement at the end of the merge window.
Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* acpica: ACPI / osl: Remove deprecated acpi_get_table_with_size()/early_acpi_os_unmap_memory() ACPI / osl: Remove acpi_get_table_with_size()/early_acpi_os_unmap_memory() users ACPICA: Tables: Allow FADT to be customized with virtual address ACPICA: Tables: Back port acpi_get_table_with_size() and early_acpi_os_unmap_memory() from Linux kernel * acpi-scan: ACPI: do not warn if _BQC does not exist
Since all users are cleaned up, remove the 2 deprecated APIs due to no users. As a Linux variable rather than an ACPICA variable, acpi_gbl_permanent_mmap is renamed to acpi_permanent_mmap to have a consistent coding style across entire Linux ACPI subsystem. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>