linux-toradex.git/drivers/acpi/pci_irq.c, branch v3.17

x86, irq, PCI: Keep IRQ assignment for runtime power management

2014-08-29T11:38:00+00:00

Now IOAPIC driver dynamically allocates IRQ numbers for IOAPIC pins.
We need to keep IRQ assignment for PCI devices during runtime power
management, otherwise it may cause failure of device wakeups.

Commit 3eec595235c17a7 "x86, irq, PCI: Keep IRQ assignment for PCI
devices during suspend/hibernation" has fixed the issue for suspend/
hibernation, we also need the same fix for runtime device sleep too.

Fix: https://bugzilla.kernel.org/show_bug.cgi?id=83271
Reported-and-Tested-by: EmanueL Czirai 
Signed-off-by: Jiang Liu 
Cc: Konrad Rzeszutek Wilk 
Cc: Tony Luck 
Cc: Joerg Roedel 
Cc: Greg Kroah-Hartman 
Cc: EmanueL Czirai 
Cc: Benjamin Herrenschmidt 
Cc: Rafael J. Wysocki 
Cc: Bjorn Helgaas 
Cc: Randy Dunlap 
Cc: Yinghai Lu 
Cc: Borislav Petkov 
Cc: Grant Likely 
Link: http://lkml.kernel.org/r/1409304383-18806-1-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner

x86, irq, PCI: Keep IRQ assignment for PCI devices during suspend/hibernation

2014-08-08T09:14:45+00:00

Now IOAPIC driver dynamically allocates IRQ numbers for IOAPIC pins.
We need to keep IRQ assignment for PCI devices during suspend/hibernation,
otherwise it may cause failure of suspend/hibernation due to:
1) Device driver calls pci_enable_device() to allocate an IRQ number
   and register interrupt handler on the returned IRQ.
2) Device driver's suspend callback calls pci_disable_device() and
   release assigned IRQ in turn.
3) Device driver's resume callback calls pci_enable_device() to
   allocate IRQ number again. A different IRQ number may be assigned
   by IOAPIC driver this time.
4) Now the hardware delivers interrupt to the new IRQ but interrupt
   handler is still registered against the old IRQ, so it breaks
   suspend/hibernation.

To fix this issue, we keep IRQ assignment during suspend/hibernation.
Flag pci_dev.dev.power.is_prepared is used to detect that
pci_disable_device() is called during suspend/hibernation.

Reported-and-Tested-by: Borislav Petkov 
Signed-off-by: Jiang Liu 
Cc: Konrad Rzeszutek Wilk 
Cc: Tony Luck 
Cc: Joerg Roedel 
Cc: Greg Kroah-Hartman 
Cc: Benjamin Herrenschmidt 
Cc: Rafael J. Wysocki 
Cc: Bjorn Helgaas 
Cc: Randy Dunlap 
Cc: Yinghai Lu 
Cc: Grant Likely 
Cc: Len Brown 
Link: http://lkml.kernel.org/r/1407478071-29399-1-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner

x86, irq, ACPI: Release IOAPIC pin when PCI device is disabled

2014-06-21T21:05:44+00:00

Release IOAPIC pin associated with PCI device when the PCI device
is disabled.

Signed-off-by: Jiang Liu 
Cc: Konrad Rzeszutek Wilk 
Cc: Tony Luck 
Cc: Joerg Roedel 
Cc: Paul Gortmaker 
Cc: Greg Kroah-Hartman 
Cc: Benjamin Herrenschmidt 
Cc: Grant Likely 
Cc: Rafael J. Wysocki 
Cc: Bjorn Helgaas 
Cc: Randy Dunlap 
Cc: Yinghai Lu 
Cc: Len Brown 
Cc: Pavel Machek 
Link: http://lkml.kernel.org/r/1402380987-32577-1-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner

ACPI / PCI: Do not call ISA-specific code if ISA is not supported

2014-02-20T20:37:42+00:00

This commit moves ISA-specific code to separate function and makes that
function depend on CONFIG_{E}ISA so that we do not have to maintain
acpi_isa_irq_to_gsi() function for architectures which do not support ISA.

Signed-off-by: Tomasz Nowicki 
Signed-off-by: Rafael J. Wysocki

ACPI / PCI: Fix memory leak in acpi_pci_irq_enable()

2014-02-18T14:47:23+00:00

acpi_pci_link_allocate_irq() can return negative gsi even if
entry != NULL.  For that case we have a memory leak, so free
entry before returning from acpi_pci_irq_enable() for gsi < 0.

Signed-off-by: Tomasz Nowicki 
Cc: All applicable 
[rjw: Subject and changelog]
Signed-off-by: Rafael J. Wysocki

ACPI: Clean up inclusions of ACPI header files

2013-12-07T00:03:14+00:00

Replace direct inclusions of ,  and
, which are incorrect, with 
inclusions and remove some inclusions of those files that aren't
necessary.

First of all, ,  and 
should not be included directly from any files that are built for
CONFIG_ACPI unset, because that generally leads to build warnings about
undefined symbols in !CONFIG_ACPI builds.  For CONFIG_ACPI set,
 includes those files and for CONFIG_ACPI unset it
provides stub ACPI symbols to be used in that case.

Second, there are ordering dependencies between those files that always
have to be met.  Namely, it is required that  be included
prior to  so that the acpi_pci_root declarations the
latter depends on are always there.  And  which provides
basic ACPICA type declarations should always be included prior to any other
ACPI headers in CONFIG_ACPI builds.  That also is taken care of including
 as appropriate.

Signed-off-by: Lv Zheng 
Cc: Greg Kroah-Hartman 
Cc: Matthew Garrett 
Cc: Tony Luck 
Cc: "H. Peter Anvin" 
Acked-by: Bjorn Helgaas  (drivers/pci stuff)
Acked-by: Konrad Rzeszutek Wilk  (Xen stuff)
Signed-off-by: Rafael J. Wysocki

PCI/ACPI: Don't cache _PRT, and don't associate them with bus numbers

2013-02-16T18:58:34+00:00

Previously, we cached _PRT (PCI routing table, ACPI 5.0 sec 6.2.12)
contents and associated each _PRT entry with a PCI bus number.  The bus
number association means dependencies on PCI device enumeration and bus
number assignment, as well as on the PCI/ACPI binding process.

After 4f535093cf ("PCI: Put pci_dev in device tree as early as possible"),
these dependencies caused the IRQ issues reported by Peter:

    pci 0000:00:1e.0: PCI bridge to [bus 09] (subtractive decode)
    pci 0000:00:1e.0: can't derive routing for PCI INT A
    snd_ctxfi 0000:09:02.0: PCI INT A: no GSI - using ISA IRQ 5
    irq 18: nobody cared (try booting with the "irqpoll" option)

This patch removes _PRT caching.  Instead, we evaluate _PRT as needed
in the pci_enable_device() path.  This also removes the dependency on
PCI bus numbers: we can simply look at the _PRT associated with each
bridge as we walk upstream toward the root.

[bhelgaas: changelog]
Reference: https://bugzilla.kernel.org/show_bug.cgi?id=53561
Reported-and-tested-by: Peter Hurley 
Suggested-by: Bjorn Helgaas 
Signed-off-by: Yinghai Lu 
Signed-off-by: Bjorn Helgaas

Merge tag 'for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2012-12-13T20:14:47+00:00

Pull PCI update from Bjorn Helgaas:
 "Host bridge hotplug:
   - Untangle _PRT from struct pci_bus (Bjorn Helgaas)
   - Request _OSC control before scanning root bus (Taku Izumi)
   - Assign resources when adding host bridge (Yinghai Lu)
   - Remove root bus when removing host bridge (Yinghai Lu)
   - Remove _PRT during hot remove (Yinghai Lu)

  SRIOV
    - Add sysfs knobs to control numVFs (Don Dutile)

  Power management
   - Notify devices when power resource turned on (Huang Ying)

  Bug fixes
   - Work around broken _SEG on HP xw9300 (Bjorn Helgaas)
   - Keep runtime PM enabled for unbound PCI devices (Huang Ying)
   - Fix Optimus dual-GPU runtime D3 suspend issue (Dave Airlie)
   - Fix xen frontend shutdown issue (David Vrabel)
   - Work around PLX PCI 9050 BAR alignment erratum (Ian Abbott)

  Miscellaneous
   - Add GPL license for drivers/pci/ioapic (Andrew Cooks)
   - Add standard PCI-X, PCIe ASPM register #defines (Bjorn Helgaas)
   - NumaChip remote PCI support (Daniel Blueman)
   - Fix PCIe Link Capabilities Supported Link Speed definition (Jingoo
     Han)
   - Convert dev_printk() to dev_info(), etc (Joe Perches)
   - Add support for non PCI BAR ROM data (Matthew Garrett)
   - Add x86 support for host bridge translation offset (Mike Yoknis)
   - Report success only when every driver supports AER (Vijay
     Pandarathil)"

Fix up trivial conflicts.

* tag 'for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (48 commits)
  PCI: Use phys_addr_t for physical ROM address
  x86/PCI: Add NumaChip remote PCI support
  ath9k: Use standard #defines for PCIe Capability ASPM fields
  iwlwifi: Use standard #defines for PCIe Capability ASPM fields
  iwlwifi: collapse wrapper for pcie_capability_read_word()
  iwlegacy: Use standard #defines for PCIe Capability ASPM fields
  iwlegacy: collapse wrapper for pcie_capability_read_word()
  cxgb3: Use standard #defines for PCIe Capability ASPM fields
  PCI: Add standard PCIe Capability Link ASPM field names
  PCI/portdrv: Use PCI Express Capability accessors
  PCI: Use standard PCIe Capability Link register field names
  x86: Use PCI setup data
  PCI: Add support for non-BAR ROMs
  PCI: Add pcibios_add_device
  EFI: Stash ROMs if they're not in the PCI BAR
  PCI: Add and use standard PCI-X Capability register names
  PCI/PM: Keep runtime PM enabled for unbound PCI devices
  xen-pcifront: Handle backend CLOSED without CLOSING
  PCI: SRIOV control and status via sysfs (documentation)
  PCI/AER: Report success only when every device has AER-aware driver
  ...

Merge branch 'acpi-general'

2012-11-29T20:43:06+00:00

* acpi-general: (38 commits)
  ACPI / thermal: _TMP and _CRT/_HOT/_PSV/_ACx dependency fix
  ACPI: drop unnecessary local variable from acpi_system_write_wakeup_device()
  ACPI: Fix logging when no pci_irq is allocated
  ACPI: Update Dock hotplug error messages
  ACPI: Update Container hotplug error messages
  ACPI: Update Memory hotplug error messages
  ACPI: Update CPU hotplug error messages
  ACPI: Add acpi_handle_() interfaces
  ACPI: remove use of __devexit
  ACPI / PM: Add Sony Vaio VPCEB1S1E to nonvs blacklist.
  ACPI / battery: Correct battery capacity values on Thinkpads
  Revert "ACPI / x86: Add quirk for "CheckPoint P-20-00" to not use bridge _CRS_ info"
  ACPI: create _SUN sysfs file
  ACPI / memhotplug: bind the memory device when the driver is being loaded
  ACPI / memhotplug: don't allow to eject the memory device if it is being used
  ACPI / memhotplug: free memory device if acpi_memory_enable_device() failed
  ACPI / memhotplug: fix memory leak when memory device is unbound from acpi_memhotplug
  ACPI / memhotplug: deal with eject request in hotplug queue
  ACPI / memory-hotplug: add memory offline code to acpi_memory_device_remove()
  ACPI / memory-hotplug: call acpi_bus_trim() to remove memory device
  ...

Conflicts:
	include/linux/acpi.h (two additions at the end of the same file)

ACPI: Fix logging when no pci_irq is allocated

2012-11-21T22:56:15+00:00

Work around a defect in the printk subsystem introduced by a
logging change.

Signed-off-by: Joe Perches 
Signed-off-by: Rafael J. Wysocki