linux-toradex.git/drivers/acpi/pci_link.c, branch v4.4.68

ACPI / PCI: Remove duplicated penalty on SCI IRQ

2015-09-25T23:53:07+00:00

Now we have dedicated interface acpi_penalize_sci_irq() to penalize
ISA IRQ used by ACPI SCI, so remove duplicated code to penalize ACPI SCI
in acpi_irq_penalty_init().

Signed-off-by: Jiang Liu 
Acked-by: Bjorn Helgaas 
Signed-off-by: Rafael J. Wysocki

ACPI, PCI, irq: Do not share PCI IRQ with ISA IRQ

2015-09-25T23:53:07+00:00

Avoid IRQs occupied by ISA IRQs when allocating IRQs for PCI link devices,
otherwise it may cause interrupt storm due to incompatible pin attributes.

This issue was triggered on a KVM virtual machine, which
 1) uses IRQ9 for SCI in high level mode.
 2) defines an PCI interrupt link device (LNKS) with IRQ9 as the only
    possible irq.
 3) has an PCI device referring to link device LNKS.
So it causes interrupt storm when enabling the PCI device because PCI IRQ
works in low level mode.

Signed-off-by: Jiang Liu 
Acked-by: Bjorn Helgaas 
Signed-off-by: Rafael J. Wysocki

Merge branches 'acpi-pci', 'acpi-soc', 'acpi-ec' and 'acpi-osl'

2015-09-01T01:41:19+00:00

* acpi-pci:
  ACPI, PCI: Penalize legacy IRQ used by ACPI SCI

* acpi-soc:
  ACPI / LPSS: Ignore 10ms delay for Braswell

* acpi-ec:
  ACPI / EC: Fix an issue caused by the serialized _Qxx evaluations

* acpi-osl:
  ACPI / osl: replace custom implementation of readq / writeq

ACPI, PCI: Penalize legacy IRQ used by ACPI SCI

2015-08-26T23:12:23+00:00

Nick Meier reported a regression with HyperV that "
  After rebooting the VM, the following messages are logged in syslog
  when trying to load the tulip driver:
    tulip: Linux Tulip drivers version 1.1.15 (Feb 27, 2007)
    tulip: 0000:00:0a.0: PCI INT A: failed to register GSI
    tulip: Cannot enable tulip board #0, aborting
    tulip: probe of 0000:00:0a.0 failed with error -16
  Errors occur in 3.19.0 kernel
  Works in 3.17 kernel.
"

According to the ACPI dump file posted by Nick at
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1440072

The ACPI MADT table includes an interrupt source overridden entry for
ACPI SCI:
[236h 0566  1]                Subtable Type : 02 
[237h 0567  1]                       Length : 0A
[238h 0568  1]                          Bus : 00
[239h 0569  1]                       Source : 09
[23Ah 0570  4]                    Interrupt : 00000009
[23Eh 0574  2]        Flags (decoded below) : 000D
                                   Polarity : 1
                               Trigger Mode : 3

And in DSDT table, we have _PRT method to define PCI interrupts, which
eventually goes to:
        Name (PRSA, ResourceTemplate ()
        {
            IRQ (Level, ActiveLow, Shared, )
                {3,4,5,7,9,10,11,12,14,15}
        })
        Name (PRSB, ResourceTemplate ()
        {
            IRQ (Level, ActiveLow, Shared, )
                {3,4,5,7,9,10,11,12,14,15}
        })
        Name (PRSC, ResourceTemplate ()
        {
            IRQ (Level, ActiveLow, Shared, )
                {3,4,5,7,9,10,11,12,14,15}
        })
        Name (PRSD, ResourceTemplate ()
        {
            IRQ (Level, ActiveLow, Shared, )
                {3,4,5,7,9,10,11,12,14,15}
        })

According to the MADT and DSDT tables, IRQ 9 may be used for:
 1) ACPI SCI in level, high mode
 2) PCI legacy IRQ in level, low mode
So there's a conflict in polarity setting for IRQ 9.

Prior to commit cd68f6bd53cf ("x86, irq, acpi: Get rid of special
handling of GSI for ACPI SCI"), ACPI SCI is handled specially and
there's no check for conflicts between ACPI SCI and PCI legagy IRQ.
And it seems that the HyperV hypervisor doesn't make use of the
polarity configuration in IOAPIC entry, so it just works.

Commit cd68f6bd53cf gets rid of the specially handling of ACPI SCI,
and then the pin attribute checking code discloses the conflicts
between ACPI SCI and PCI legacy IRQ on HyperV virtual machine,
and rejects the request to assign IRQ9 to PCI devices.

So penalize legacy IRQ used by ACPI SCI and mark it unusable if ACPI
SCI attributes conflict with PCI IRQ attributes.

Please refer to following links for more information:
https://bugzilla.kernel.org/show_bug.cgi?id=101301
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1440072

Fixes: cd68f6bd53cf ("x86, irq, acpi: Get rid of special handling of GSI for ACPI SCI")
Reported-and-tested-by: Nick Meier 
Acked-by: Thomas Gleixner 
Cc: 3.19+  # 3.19+
Signed-off-by: Jiang Liu 
Signed-off-by: Rafael J. Wysocki

ACPI: Remove FSF mailing addresses

2015-07-08T00:27:32+00:00

There is no need to carry potentially outdated Free Software Foundation
mailing address in file headers since the COPYING file includes it.

Signed-off-by: Jarkko Nikula 
Signed-off-by: Rafael J. Wysocki

ACPI: Remove duplicate definitions of PREFIX

2014-03-19T01:01:57+00:00

We already have a macro for PREFIX of "ACPI: " in
drivers/acpi/internal.h, so remove the duplicate ones
in ACPI drivers when internal.h is included.

Signed-off-by: Hanjun Guo 
Signed-off-by: Rafael J. Wysocki

ACPI / PCI: Include appropriate header file in pci_link.c

2014-01-05T23:13:22+00:00

Includes appropriate header file internal.h in pci_link.c
because function acpi_pci_link_init() has its prototype declaration in
internal.h.

This eliminates the following warning in pci_link.c:
drivers/acpi/pci_link.c:874:13: warning: no previous prototype for ‘acpi_pci_link_init’ [-Wmissing-prototypes]

Signed-off-by: Rashika Kheria 
Reviewed-by: Josh Triplett 
Signed-off-by: Rafael J. Wysocki

ACPI: Clean up inclusions of ACPI header files

2013-12-07T00:03:14+00:00

Replace direct inclusions of ,  and
, which are incorrect, with 
inclusions and remove some inclusions of those files that aren't
necessary.

First of all, ,  and 
should not be included directly from any files that are built for
CONFIG_ACPI unset, because that generally leads to build warnings about
undefined symbols in !CONFIG_ACPI builds.  For CONFIG_ACPI set,
 includes those files and for CONFIG_ACPI unset it
provides stub ACPI symbols to be used in that case.

Second, there are ordering dependencies between those files that always
have to be met.  Namely, it is required that  be included
prior to  so that the acpi_pci_root declarations the
latter depends on are always there.  And  which provides
basic ACPICA type declarations should always be included prior to any other
ACPI headers in CONFIG_ACPI builds.  That also is taken care of including
 as appropriate.

Signed-off-by: Lv Zheng 
Cc: Greg Kroah-Hartman 
Cc: Matthew Garrett 
Cc: Tony Luck 
Cc: "H. Peter Anvin" 
Acked-by: Bjorn Helgaas  (drivers/pci stuff)
Acked-by: Konrad Rzeszutek Wilk  (Xen stuff)
Signed-off-by: Rafael J. Wysocki

ACPI: Set length even for TYPE_END_TAG acpi resource

2013-03-24T00:00:38+00:00

Found with a network device in QEMU/KVM guest not working anymore.

Bisected to commit c13085e5
    ACPICA: Resource Mgr: Prevent infinite loops in resource walks

That commit will check acpi_resource length strictly which causes
acpi_set_current_resources to return failure and IRQ for PCI
devices is not set properly.

Set length for all those TYPE_END_TAG acpi_resources.

[rjw: Changelog]
Bisected-by: Yinghai Lu 
Signed-off-by: Yinghai Lu 
Signed-off-by: Rafael J. Wysocki

ACPI / PCI: Make PCI IRQ link driver use struct acpi_scan_handler

2013-01-30T13:27:37+00:00

Make the ACPI PCI IRQ link driver use struct acpi_scan_handler
for representing the object used to set up ACPI interrupt links and
to remove data structures used for this purpose before unregistering
the corresponding ACPI device nodes.

This simplifies the code slightly and reduces the kernel's memory
footprint by avoiding the registration of a struct device_driver
object with the driver core and creation of its sysfs directory
which is unnecessary.

Signed-off-by: Rafael J. Wysocki 
Acked-by: Yinghai Lu 
Acked-by: Toshi Kani