linux-toradex.git/drivers/acpi/pci_root.c, branch v4.3.1

ACPI: Remove FSF mailing addresses

2015-07-08T00:27:32+00:00

There is no need to carry potentially outdated Free Software Foundation
mailing address in file headers since the COPYING file includes it.

Signed-off-by: Jarkko Nikula 
Signed-off-by: Rafael J. Wysocki

PCI: Don't clear ASPM bits when the FADT declares it's unsupported

2015-04-09T19:20:11+00:00

Communications with a hardware vendor confirm that the expected behaviour
on systems that set the FADT ASPM disable bit but which still grant full
PCIe control is for the OS to leave any BIOS configuration intact and
refuse to touch the ASPM bits.  This mimics the behaviour of Windows.

Signed-off-by: Matthew Garrett 
Signed-off-by: Bjorn Helgaas

x86/irq, ACPI: Implement ACPI driver to support IOAPIC hotplug

2015-02-05T14:09:26+00:00

Enable support of IOAPIC hotplug by:
1) reintroducing ACPI based IOAPIC driver
2) enhance pci_root driver to hook hotplug events

The ACPI IOAPIC driver is always enabled if all of ACPI, PCI and IOAPIC
are enabled.

Signed-off-by: Jiang Liu 
Cc: Konrad Rzeszutek Wilk 
Cc: Tony Luck 
Cc: Joerg Roedel 
Cc: Greg Kroah-Hartman 
Cc: Benjamin Herrenschmidt 
Cc: Rafael J. Wysocki 
Cc: Bjorn Helgaas 
Cc: Randy Dunlap 
Cc: Yinghai Lu 
Cc: Borislav Petkov 
Cc: Len Brown 
Link: http://lkml.kernel.org/r/1414387308-27148-19-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner 
Signed-off-by: Rafael J. Wysocki

ACPICA: Resources: Provide common part for struct acpi_resource_address structures.

2015-01-26T15:09:56+00:00

struct acpi_resource_address and struct acpi_resource_extended_address64 share substracts
just at different offsets. To unify the parsing functions, OSPMs like Linux
need a new ACPI_ADDRESS64_ATTRIBUTE as their substructs, so they can
extract the shared data.

This patch also synchronizes the structure changes to the Linux kernel.
The usages are searched by matching the following keywords:
1. acpi_resource_address
2. acpi_resource_extended_address
3. ACPI_RESOURCE_TYPE_ADDRESS
4. ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS
And we found and fixed the usages in the following files:
 arch/ia64/kernel/acpi-ext.c
 arch/ia64/pci/pci.c
 arch/x86/pci/acpi.c
 arch/x86/pci/mmconfig-shared.c
 drivers/xen/xen-acpi-memhotplug.c
 drivers/acpi/acpi_memhotplug.c
 drivers/acpi/pci_root.c
 drivers/acpi/resource.c
 drivers/char/hpet.c
 drivers/pnp/pnpacpi/rsparser.c
 drivers/hv/vmbus_drv.c

Build tests are passed with defconfig/allnoconfig/allyesconfig and
defconfig+CONFIG_ACPI=n.

Original-by: Thomas Gleixner 
Original-by: Jiang Liu 
Signed-off-by: Lv Zheng 
Signed-off-by: Rafael J. Wysocki

pci, ACPI, iommu: Enhance pci_root to support DMAR device hotplug

2014-11-18T14:22:35+00:00

Finally enhance pci_root driver to support DMAR device hotplug when
hot-plugging PCI host bridges.

Signed-off-by: Jiang Liu 
Reviewed-by: Yijing Wang 
Acked-by: Bjorn Helgaas 
Signed-off-by: Joerg Roedel

ACPI: Support _OSI("Darwin") correctly

2014-09-24T21:31:12+00:00

Apple hardware queries _OSI("Darwin") in order to determine whether the
system is running OS X, and changes firmware behaviour based on the
answer.  The most obvious difference in behaviour is that Thunderbolt
hardware is forcibly powered down unless the system is running OS X. The
obvious solution would be to simply add Darwin to the list of supported
_OSI strings, but this causes problems.

Recent Apple hardware includes two separate methods for checking _OSI
strings. The first will check whether Darwin is supported, and if so
will exit. The second will check whether Darwin is supported, but will
then continue to check for further operating systems. If a further
operating system is found then later firmware code will assume that the
OS is not OS X.  This results in the unfortunate situation where the
Thunderbolt controller is available at boot time but remains powered
down after suspend.

The easiest way to handle this is to special-case it in the
Linux-specific OSI handling code. If we see Darwin, we should answer
true and then disable all other _OSI vendor strings.

The next problem is that the Apple PCI _OSC method has the following
code:

if (LEqual (0x01, OSDW ()))
  if (LAnd (LEqual (Arg0, GUID), NEXP)
    (do stuff)
  else
    (fail)
NEXP is a value in high memory and is presumably under the control of
the firmware. No methods sets it. The methods that are called in the "do
stuff" path are dummies. Unless there's some additional firmware call in
early boot, there's no way for this call to succeed - and even if it
does, it doesn't do anything.

The easiest way to handle this is simply to ignore it. We know which
flags would be set, so just set them by hand if the platform is running
in Darwin mode.

Signed-off-by: Matthew Garrett 
[andreas.noever@gmail.com: merged two patches, do not touch ACPICA]
Signed-off-by: Andreas Noever 
Signed-off-by: Rafael J. Wysocki

ACPI / PM: Revork the handling of ACPI device wakeup notifications

2014-07-22T23:00:45+00:00

Since ACPI wakeup GPEs are going to be enabled during system suspend
as well as for runtime wakeup by a subsequent patch and the same
notify handlers will be used in both cases, rework the ACPI device
wakeup notification framework so that the part specific to physical
devices is always run asynchronously from the PM workqueue.  This
prevents runtime resume callbacks for those devices from being
run during system suspend and resume which may not be appropriate,
among other things.

Also make ACPI device wakeup notification handling a bit more robust
agaist subsequent removal of ACPI device objects, whould that ever
happen, and create a wakeup source object for each ACPI device
configured for wakeup so that wakeup notifications for those
devices can wake up the system from the "freeze" sleep state.

Signed-off-by: Rafael J. Wysocki

Merge branches 'acpi-cleanup', 'acpi-thermal', 'acpi-pci', 'acpi-lpss' and 'acpi-button'

2014-03-20T12:20:47+00:00

* acpi-cleanup:
  ACPI: Remove duplicate definitions of PREFIX
  ACPI / tables: Replace printk with pr_*

* acpi-thermal:
  ACPI / thermal: make acpi_thermal_check asynchronous on resume

* acpi-pci:
  ACPI / PCI: Do not call ISA-specific code if ISA is not supported

* acpi-lpss:
  ACPI / LPSS: Add Intel BayTrail ACPI mode PWM

* acpi-button:
  ACPI / button: Add ACPI Button event via netlink routine

ACPI: Remove duplicate definitions of PREFIX

2014-03-19T01:01:57+00:00

We already have a macro for PREFIX of "ACPI: " in
drivers/acpi/internal.h, so remove the duplicate ones
in ACPI drivers when internal.h is included.

Signed-off-by: Hanjun Guo 
Signed-off-by: Rafael J. Wysocki

ACPI / hotplug / PCI: Rework acpiphp_check_host_bridge()

2014-02-06T16:31:52+00:00

Since the only existing caller of acpiphp_check_host_bridge(),
which is acpi_pci_root_scan_dependent(), already has a struct
acpi_device pointer needed to obtain the ACPIPHP context, it
doesn't make sense to execute acpi_bus_get_device() on its
handle in acpiphp_handle_to_bridge() just in order to get that
pointer back.

For this reason, modify acpiphp_check_host_bridge() to take
a struct acpi_device pointer as its argument and rearrange the
code accordingly.

Signed-off-by: Rafael J. Wysocki 
Tested-by: Mika Westerberg