Conflicts:
	drivers/acpi/power.c

Signed-off-by: Len Brown <len.brown@intel.com>

The wakeup.prepared flag is used for marking devices that have the
wake-up power already enabled, so that the wake-up power is not
enabled twice in a row for the same device.  This assumes, however,
that device wake-up power will only be enabled once, while the device
is being prepared for a system-wide sleep transition, and the second
attempt is made by acpi_enable_wakeup_device_prep().

With the upcoming PCI wake-up rework this assumption will not hold
any more for PCI bridges and the root bridge whose wake-up power
may be enabled as a result of wake-up enable propagation from other
devices (eg. add-on devices that are not associated with any GPEs).
Thus, there may be many attempts to enable wake-up power on a PCI
bridge or the root bridge during a system power state transition
and it's better to replace wakeup.prepared with a reference counter.

Reviewed-by: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

Linux/ACPI core files using internal.h all PREFIX "ACPI: ",
however, not all ACPI drivers use/want it -- and they
should not have to #undef PREFIX to define their own.

Add GPL commment to internal.h while we are there.

This does not change any actual console output,
asside from a whitespace fix.

Signed-off-by: Len Brown <len.brown@intel.com>

We used to evaluate _STA to check the power state of a device after
running _ON or _OFF.  But as far as I can tell, there's no benefit
to evaluating _STA, and sometimes we trip over bugs when BIOSes don't
implement _STA correctly.

Yakui says Windows XP doesn't evaluate _STA during power transition.
So let's skip it in Linux, too.  It's conceivable that we'll need to
check _STA in the future for some reason, but until we do, I don't
see a reason to clutter this code path.

References:
    http://bugzilla.kernel.org/show_bug.cgi?id=13243
    http://marc.info/?l=linux-acpi&m=124166053803753&w=2
    http://marc.info/?l=linux-acpi&m=124175761408256&w=2
    http://marc.info/?l=linux-acpi&m=124210593114061&w=2

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Len Brown <len.brown@intel.com>

Conflicts:
	drivers/acpi/Makefile

Signed-off-by: Len Brown <len.brown@intel.com>

Impact: cleanup

Rather than overriding MODULE_PARAM_PREFIX, build via acpi.o so
KBUILD_MODNAME is set to "acpi".

This is the logical way to do it, even though acpi cannot be a module
due to these config options being bool.  Those parts of ACPI which can
be modular are not built into the acpi "module".

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Len Brown <len.brown@intel.com>

This patch makes acpi_init() call acpi_power_init() directly.
Previously, both were subsys_initcalls.  acpi_power_init()
must happen after acpi_init(), and it's better to call it
explicitly rather than rely on link ordering.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
CC: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

acpi_ut_get_node_name is an internal acpica function.
use acpi_get_name to get node ascii name

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Move all the component definitions for drivers to a single shared place,
include/acpi/acpi_drivers.h.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>