linux-toradex.git/drivers/acpi/sleep.c, branch v4.10

Merge branches 'pm-sleep' and 'pm-cpufreq'

2017-01-26T23:08:59+00:00

* pm-sleep:
  Revert "PM / sleep / ACPI: Use the ACPI_FADT_LOW_POWER_S0 flag"

* pm-cpufreq:
  cpufreq: intel_pstate: Fix sysfs limits enforcement for performance policy

Revert "PM / sleep / ACPI: Use the ACPI_FADT_LOW_POWER_S0 flag"

2017-01-20T02:33:57+00:00

Revert commit 08b98d329165 (PM / sleep / ACPI: Use the ACPI_FADT_LOW_POWER_S0
flag) as it caused system suspend (in the default configuration) to fail
on Dell XPS13 (9360) with the Kaby Lake processor.

Fixes: 08b98d329165 (PM / sleep / ACPI: Use the ACPI_FADT_LOW_POWER_S0 flag)
Reported-by: Paul Menzel 
Signed-off-by: Rafael J. Wysocki

Merge branches 'pm-sleep' and 'powercap'

2016-12-12T19:46:35+00:00

* pm-sleep:
  PM / sleep: Print active wakeup sources when blocking on wakeup_count reads
  x86/suspend: fix false positive KASAN warning on suspend/resume
  PM / sleep / ACPI: Use the ACPI_FADT_LOW_POWER_S0 flag
  PM / sleep: System sleep state selection interface rework
  PM / hibernate: Verify the consistent of e820 memory map by md5 digest

* powercap:
  powercap / RAPL: Add Knights Mill CPUID
  powercap/intel_rapl: fix and tidy up error handling
  powercap/intel_rapl: Track active CPUs internally
  powercap/intel_rapl: Cleanup duplicated init code
  powercap/intel rapl: Convert to hotplug state machine
  powercap/intel_rapl: Propagate error code when registration fails
  powercap/intel_rapl: Add missing domain data update on hotplug

Merge branches 'acpi-sleep-fixes' and 'acpi-wdat-fixes'

2016-11-25T21:24:07+00:00

* acpi-sleep-fixes:
  Revert "ACPI: Execute _PTS before system reboot"

* acpi-wdat-fixes:
  watchdog: wdat_wdt: Select WATCHDOG_CORE

PM / sleep / ACPI: Use the ACPI_FADT_LOW_POWER_S0 flag

2016-11-21T21:48:10+00:00

Modify the ACPI system sleep support setup code to select
suspend-to-idle as the default system sleep state if the
ACPI_FADT_LOW_POWER_S0 flag is set in the FADT and the
default sleep state was not selected from the kernel command
line.

Signed-off-by: Rafael J. Wysocki 
Tested-by: Mario Limonciello

Revert "ACPI: Execute _PTS before system reboot"

2016-11-21T13:25:49+00:00

Revert commit 2c85025c75df (ACPI: Execute _PTS before system reboot)
as it is reported to cause poweroff and reboot to hang on Dell
Latitude E7250.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=187061
Reported-by:  Gianpaolo 
Signed-off-by: Rafael J. Wysocki

Merge branches 'acpi-wdat' and 'acpi-ec'

2016-10-01T23:40:07+00:00

* acpi-wdat:
  watchdog: wdat_wdt: Fix warning for using 0 as NULL
  watchdog: wdat_wdt: fix return value check in wdat_wdt_probe()
  platform/x86: intel_pmc_ipc: Do not create iTCO watchdog when WDAT table exists
  i2c: i801: Do not create iTCO watchdog when WDAT table exists
  mfd: lpc_ich: Do not create iTCO watchdog when WDAT table exists
  ACPI / watchdog: Add support for WDAT hardware watchdog

* acpi-ec:
  ACPI / EC: Fix issues related to boot_ec
  ACPI / EC: Fix a gap that ECDT EC cannot handle EC events
  ACPI / EC: Fix a memory leakage issue in acpi_ec_add()
  ACPI / EC: Cleanup first_ec/boot_ec code
  ACPI / EC: Enable event freeze mode to improve event handling for suspend process
  ACPI / EC: Add PM operations to improve event handling for suspend process
  ACPI / EC: Add PM operations to improve event handling for resume process
  ACPI / EC: Fix an issue that SCI_EVT cannot be detected after event is enabled
  ACPI / EC: Add EC_FLAGS_QUERY_ENABLED to reveal a hidden logic
  ACPI / EC: Add PM operations for suspend/resume noirq stage

ACPI / EC: Add PM operations to improve event handling for resume process

2016-08-30T22:32:10+00:00

This patch makes 2 changes:

1. Restore old behavior
Originally, EC driver stops handling both events and transactions in
acpi_ec_block_transactions(), and restarts to handle transactions in
acpi_ec_unblock_transactions_early(), restarts to handle both events and
transactions in acpi_ec_unblock_transactions().
While currently, EC driver still stops handling both events and
transactions in acpi_ec_block_transactions(), but restarts to handle both
events and transactions in acpi_ec_unblock_transactions_early().
This patch tries to restore the old behavior by dropping
__acpi_ec_enable_event() from acpi_unblock_transactions_early().

2. Improve old behavior
However this still cannot fix the real issue as both of the
acpi_ec_unblock_xxx() functions are invoked in the noirq stage. Since the
EC driver actually doesn't implement the event handling in the polling
mode, re-enabling the event handling too early in the noirq stage could
result in the problem that if there is no triggering source causing
advance_transaction() to be invoked, pending SCI_EVT cannot be detected by
the EC driver and _Qxx cannot be triggered.
It actually makes sense to restart the event handling in any point during
resuming after the noirq stage. Just like the boot stage where the event
handling is enabled in .add(), this patch further moves
acpi_ec_enable_event() to .resume(). After doing that, the following 2
functions can be combined:
acpi_ec_unblock_transactions_early()/acpi_ec_unblock_transactions().

The differences of the event handling availability between the old behavior
(this patch isn't applied) and the new behavior (this patch is applied) are
as follows:
                        !Applied        Applied
before suspend          Y               Y
suspend before EC       Y               Y
suspend after EC        Y               Y
suspend_late            Y               Y
suspend_noirq           Y (actually N)  Y (actually N)
resume_noirq            Y (actually N)  Y (actually N)
resume_late             Y (actually N)  Y (actually N)
resume before EC        Y (actually N)  Y (actually N)
resume after EC         Y (actually N)  Y
after resume            Y (actually N)  Y
Where "actually N" means if there is no triggering source, the EC driver
is actually not able to notice the pending SCI_EVT occurred in the noirq
stage. So we can clearly see that this patch has improved the situation.

Signed-off-by: Lv Zheng 
Tested-by: Todd E Brandt 
Signed-off-by: Rafael J. Wysocki

ACPI / sysfs: Use new GPE masking mechanism in GPE interface

2016-08-17T00:10:44+00:00

Now GPE can be masked via the new acpi_mask_gpe() API and this patch
modifies /sys/firmware/acpi/interrupts/gpexx to use this new facility.

Writes "mask/unmask" to this file now invokes acpi_mask_gpe().

Reads from this file now returns new "EN/STS" when the corresponding GPE
hardware register's EN/STS bits are flagged, and new "masked/unmasked"
attribute to indicate the status of the masking mechanism.

Signed-off-by: Lv Zheng 
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki

ACPI: Execute _PTS before system reboot

2016-06-29T21:44:02+00:00

The _PTS control method is defined in the section 7.4.1 of acpi 6.0
spec. The _PTS control method is executed by the OS during the sleep
transition process for S1, S2, S3, S4, and for orderly S5 shutdown.

The _PTS control method provides the BIOS a mechanism for performing
some housekeeping, such as writing the sleep type value to the embedded
controller, before entering the system sleeping state. Note that some
Lenovo Server BIOS use this mechanism to detect reboot event and
prompt user by popped dialog box.

According to section 7.5 of acpi 6.0 spec, _PTS should run after _TTS.
Add a _PTS evaulation to the existing _TTS reboot notifier and change
the notifier name to reflect the fact that it's not for _TTS only any
more.

Signed-off-by: Ocean He 
Signed-off-by: Nagananda Chumbalkar 
Signed-off-by: Rafael J. Wysocki