Pull ACPI support fixes from Rafael Wysocki:
 "These address assorted issues in ACPI support code and work around
  concurrency-related issues in AML on some platforms:

   - Separate handler locking from sysfs lifetime in the ACPI platform
     profile driver to avoid possible deadlocks due to sysfs accesses
     during driver removal (Daniel Lezcano)

   - Introduce additional locking around the evaluation of selected ACPI
     control methods in a few places to work around issues related to
     concurrency in AML on some platforms (Ali Ahmet Memiş)

   - Address two issues reported by Sashiko in the ACPI table data sysfs
     interface (Jamie Nguyen)

   - Initialize parser_state.aml_end in acpi_install_method() properly
     to avoid out-of-bounds accesses during control method installation
     (Ivan Hu)"

* tag 'acpi-7.4-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: sysfs: Finish sysfs init when creating a table file fails
  ACPI: sysfs: Map only the requested range in acpi_data_show()
  ACPICA: Initialize parser_state.aml_end in acpi_install_method()
  ACPI: platform_profile: Separate handler locking from sysfs lifetime
  platform/x86: ideapad-laptop: Evaluate ACPI methods exclusively
  thermal: intel: int340x: Evaluate _TMP exclusively
  ACPI: battery: Evaluate battery methods exclusively
  ACPI: utils: Add exclusive AML evaluation helpers

Pull LoongArch updates from Huacai Chen:

 - Add LoongArch-specific ACPI initialization

 - Set NX compat flag in PE/COFF efi header

 - Use pa_to_nid()/nid_to_addrbase() rather than hard-code

 - Detect and expose LAMCAS/DIV32 feature existence

 - Fix and improve perf hardware breakpoints

 - Fix and improve BPF JIT (trampoline and 32-bit operations)

 - Add arch_crash_save_vmcoreinfo() support

 - Some bug fixes and other small changes

* tag 'loongarch-7.4' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (24 commits)
  soc: loongson: loongson2_guts: Use of_root instead of own reference
  soc: loongson: loongson2_pm: Fix build warnings for 32BIT
  LoongArch: dts: loongson-2k0500: Drop unsupported bus_id in DWMAC
  LoongArch: BPF: Optimize 32-bit operations using native instructions
  LoongArch: BPF: Clean up and decouple is32 parameter from move_imm()
  LoongArch: BPF: Fix stack arguments for indirect trampolines
  LoongArch: Add arch_crash_save_vmcoreinfo() support
  LoongArch: Fix one-shot limitation for perf hardware breakpoints
  LoongArch: Fix perf hardware breakpoint failure via installation
  LoongArch: Only send SIGTRAP signal if necessary in do_watch()
  LoongArch: Fix architectural naming typo for CSR_FWPS_SKIP
  LoongArch: Fix bitmask corruption in update_bp_registers()
  LoongArch: Remove redundant call in update_bp_registers()
  LoongArch: Remove arch-specific __smp_mb__{before,after}_atomic()
  LoongArch: Detect and expose DIV32 feature existence
  LoongArch: Detect and expose LAMCAS feature existence
  LoongArch: Use pa_to_nid()/nid_to_addrbase() rather than hard-code
  LoongArch: Don't init & online empty nodes
  LoongArch: Call cpu_final_simd() with pure_initcall()
  LoongArch: Use assign_bit() API where applicable
  ...

Merge additional updates related to ACPI support in device drivers and
ACPI sysfs interface fixes for 7.4-rc1:

 - Separate handler locking from sysfs lifetime in the ACPI platform
   profile driver (Daniel Lezcano)

 - Introduce additional locking around the evaluation of selected ACPI
   control methods in a few places to work around issues related to
   concurrency in AML on some platforms (Ali Ahmet Memiş)

 - Address two issues reported by Sashiko in the ACPI table data sysfs
   interface (Jamie Nguyen)

* acpi-driver:
  ACPI: platform_profile: Separate handler locking from sysfs lifetime
  platform/x86: ideapad-laptop: Evaluate ACPI methods exclusively
  thermal: intel: int340x: Evaluate _TMP exclusively
  ACPI: battery: Evaluate battery methods exclusively
  ACPI: utils: Add exclusive AML evaluation helpers

* acpi-sysfs:
  ACPI: sysfs: Finish sysfs init when creating a table file fails
  ACPI: sysfs: Map only the requested range in acpi_data_show()

Pull RISC-V updates from Paul Walmsley:

 - Add support for crash hotplug

 - Improve user copy performance on cores with fast misaligned accesses

 - Optimize code paths involving pgtable_l{4,5}_enabled() by patching in
   the return values during early boot (since these don't change during
   runtime), or by specifying the return values directly in Kconfig
   files (for purpose-built kernels)

 - Change the PCIe bus reassignment behavior to depend on the
   PCI_REASSIGN_ALL_BUS PCI flag (as ARM64 does)

 - Avoid an unnecessary sstatus CSR read during context switch

 - Make the sbi_ecall() macro variadic, improving code clarity

 - Refactor __switch_to_vector() to prepare for upcoming vector context
   switch optimizations

 - Add a kselftest for vectorized user copy

 - Add bounds checking on the shadow stack restore token address to
   avoid it being used as an attack vector

 - Fix the shadow stack and indirect branch landing pad control
   functions to only update the CPU's envcfg CSR when operating on the
   current task

 - For MIPS RISC-V systems, add support for early boot-applied errata;
   and for P8700 RISC-V systems, avoid WFI usage in the kernel (since it
   is buggy)

 - Add the "B" RISC-V ISA extension to hwcap and hwprobe reporting

 - Add support for specifying and reporting the "Zic64b" RISC-V ISA
   extension, and add it to the SpacemiT K1, K3, and Sophgo SG2044 DT
   files

 - Require the block size of cache management operations to be specified
   in DT schema validation for the RISC-V ISA extensions Zicbom, Zicbop,
   and Zicboz

 - Some miscellaneous fixes: fix an incorrect bitfield width in the
   RVG_SYSTEM_CSR_MASK bitmask macro; make RISCV_ALTERNATIVE mandatory,
   now that XIP kernel support has been removed; and remove some
   unnecessary includes in kernel/smp.c

* tag 'riscv-for-linus-7.4-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (28 commits)
  riscv: mm: unexport _pgtable_l4_enabled and _pgtable_l5_enabled
  riscv: introduce RISCV_ISA_SV48 and RISCV_ISA_SV57
  riscv: support early isa ext and use it to optimize pgtable_l4|l5_enabled
  riscv: convert pgtable_l4|l5_enabled to inline function
  riscv: remove RISCV_ALTERNATIVE Kconfig option
  riscv: Add a getter for user PMLEN support
  riscv: dts: sophgo: sg2044: Add Zic64b ISA extension
  riscv: dts: spacemit: k1: Add Zic64b ISA extension
  riscv: dts: spacemit: k3: Add Zic64b ISA extension
  riscv: Add Zic64b to cpufeature and hwprobe
  dt-bindings: riscv: Add Zic64b extension description
  dt-bindings: riscv: Require block-size for Zicbom, Zicbop, and Zicboz
  riscv: Add B to hwcap and hwprobe
  riscv: remove unused profile.h includes
  riscv: cfi: Only write envcfg CSR when task is current
  riscv: cfi: Bounds check restore token before swap
  riscv: Add ERRATA_MIPS_P8700_WFI to replace WFI with mips.pause
  selftest: riscv: test vectorized user copy
  riscv: vector: refactor context switch for kernel-mode vector
  riscv: do not read csr in vector context switch
  ...

Pull x86 platform driver updates from Ilpo Järvinen:
 "The usual updates for laptop quirks from HP, ASUS, Acer, Dell etc:
   - new model names and recent CPU support
   - more special button / function key handling
   - battery and hardware monitoring quirks

  Tool updates to intel-speed-select

  WMI now supports non-x86 architectures

  Miscellaneous cleanups / refactoring / improvements"

* tag 'platform-drivers-x86-v7.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (237 commits)
  platform/x86: asus-wmi: name the TUF keyboard RGB state and speed codes
  platform/x86: asus-wmi: fix TUF keyboard power state shutdown naming
  platform/x86: asus-wmi: rename TUF RGB state DEVID to _CMD
  platform/x86: asus-armoury: add power limits quirk for GU605CM
  platform/x86: asus-armoury: add power limits quirk for G533QS
  platform/x86: asus-armoury: add power limits quirk for GA402NV
  platform/x86: asus-armoury: add power limits quirk for FA608UP
  platform/x86: asus-armoury: add power limits quirk for FA608UH
  platform/x86: asus-armoury: add power limits quirk for FA608PM
  platform/x86: asus-armoury: add power limits quirk for G713QR
  platform/x86: ibm_rtl: Fix potential OOB read at signature search
  platform/x86: acer-wmi: Add support for Acer Nitro AN16-41
  platform/x86: acer-wmi: Cycle platform profile on mode key 0x4
  platform/x86: hp-wmi: Disable hwmon attributes when no fans are usable
  platform/x86: gpd pocket fan: Cancel work before releasing GPIOs
  platform/x86: asus-armoury: Add XBOX ROG Ally X 20 Tunables
  platform/x86: msi-wmi: Ignore WMI events for keys also handled by atkbd
  platform/x86: msi-wmi: Sort scancodes numerically
  platform: arm64: Add a driver for the EC found on ASUS Glymur machines
  MAINTAINERS: Add myself as a LENOVO drivers co-maintainer
  ...

acpi_iommu_configure_id() currently only supports IORT and VIOT. Add
support for LoongArch's IOVT as well.

Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch IOMMU scanning flow is similar with virtio-iommu, there is an
early init phase and a late init phase. In the early init function, PCI
ACS is enabled if there is IOMMU table, and the late init function is
called after PCI device scanning, where IOVT table scanning function is
executed.

Here add acpi_arch_init() and acpi_arch_late_init() API for LoongArch:
the acpi_iovt_init() function is to enable PCI ACS function if the IOMMU
device exists in IOVT table; while the acpi_iovt_late_init() function is
to scan IOVT table and add IOMMU devices.

Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Pull sound updates from Takashi Iwai:
 "The AI flood continues, which brought us a fairly busy development
  cycle again with changes spread across the subsystem, ranging from
  (lots of) core hardening to new platforms and codecs.

  Here are some highlights.

  ALSA core:
   - PCM: race fixes around channel-map controls, draining/unlink, drop
     sync-stop handling, and DMA buffer delay sync
   - Compress-offload: state and geometry validations, buffer leak fix,
     and stream/card lifetime management
   - Jack: module pinning during debugfs access, control removal race
     fix, and early injection exposure
   - Timer & sequencer: module pinning for user timers, RCU grace period
     wait on port deletion, UMP bounds fixes
   - Mark OSS sequencer emulation as deprecated
   - RawMIDI: proper disconnect handling and input work drain cleanup
   - Control: fixes for vmaster racy setups and control callback
     serialization, UAF fix on card disconnect

  ASoC core:
   - Continued framework refactoring, deployment of
     auto_selectable_formats across codecs and platform DAIs
   - Generic card cleanup: free jack GPIOs on card remove for
     simple-card and audio-graph-card variants
   - SDCA improvements: SimpleJack function type support, library
     helpers, and non-ACPI build support
   - Conversion of deprecated DMA API calls

  ASoC SOF:
   - Support for compressed audio playback on SOF IPC4 with Intel TGL+
   - AMD ACP 7.B / 7.F SoundWire and PDM controller support, ASP
     carveout firmware loading
   - Function topology support for Intel I2S machines

  ASoC platforms & codecs:
   - Qualcomm: New QAIF driver for Shikra platform, WCD9378 SDCA codec,
     Nord Ride/RRD and Motorola Edge 30 boards, LPASS macro cache
     converted to maple tree
   - New codec drivers: ESS ES9039Q2M, Nuvoton NAU83G60 amplifier,
     Senary SN624x SoundWire SDCA codec
   - MediaTek / Airoha: New Airoha AN7581 AFE and WM8960 machine
     drivers, extensive clock and error-handling cleanups across
     MediaTek SoCs
   - NVIDIA Tegra: WM8994 machine driver and CS35L45 MDSYNC support
   - Realtek: RT766/RT767, RT721_U, RT718 variants, RT712 GPIO LED
     control
   - Cirrus Logic: CS35L45 MDSYNC support, CS35L56 regmap default tests
   - TI: TAS2573 DSP support in TAS2781, TAS2783 SoundWire fixes
   - Everest Semi: ES8326 standby / HPF controls, ES8389 / ES8375 resume
     fixes
   - Removal of obsolete ST-Ericsson Ux500 MOP500 machine driver

  HD-audio:
   - ACPI controller runtime PM suspend/resume support
   - Controller shutdown and unbind race fixes for unsol events and jack
     polling
   - HDMI: High Bit Rate (HBR) audio capability enabled, ELD proc and
     converter bounds checks
   - AW88399 side codec SSID-specific firmware naming and Lenovo Legion
     R9000P enablement
   - Realtek / Conexant / Cirrus / TI quirks for numerous laptops
     (Lenovo, ASUS, HP, Acer, HONOR, Minisforum, MSI, etc.)
   - Creative CA0132 Sound BlasterX AE-5 external RGB LED strip support

  USB-audio:
   - Dedicated mixer driver for Audient EVO4
   - Native Instruments Kore controller LCD support and keymap fix
   - Pioneer DJ DDJ-SZ and Roland (OCTA-CAPTURE / QUAD-CAPTURE
     multirate, TD-11) support
   - UAC2/3 mixer unit matrix evaluation and bounds checking
   - Hardening for LINE6 and caiaq drivers against malformed packets and
     races
   - Device-specific quirks for PreSonus, TASCAM, Logitech, Mayflower,
     MOONDROP, Yamaha, etc.

  Misc:
   - Auto-cleanup conversion for snd_card_free() and devres migration
     across dozens of legacy PCI, ISA, and Sparc drivers
   - ALSA loopback (aloop) timer lifecycle fixes and new aloop selftest
   - pcmtest driver fixes and kselftest updates"

* tag 'sound-7.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (924 commits)
  ALSA: hda/realtek: Add mute and mic-mute LEDs for HP ENVY 16 (103c:8be5)
  selftests: ALSA: pcmtest: Compare all captured bytes in ni_capture
  ALSA: usb-audio: Use strscpy() in append_ctl_name()
  ALSA: caiaq: Use strscpy() in snd_usb_caiaq_input_init()
  ALSA: hiface: Use scnprintf() in hiface_chip_create()
  selftests/alsa: Check the aloop PCM Slave controls for a matching playback
  ALSA: aloop: Update the PCM Slave controls for a matching playback
  selftests: ALSA: pcmtest: Make room for the longest fill pattern
  selftests: ALSA: pcmtest: Check the frame count of each transfer
  ALSA: hda/realtek: Fix speakers on COLORFUL L1 Plus
  ALSA: hda/realtek: enable AW88399 on Lenovo Legion R9000P AFR10
  ALSA: line6: Handle period elapsed calls outside the locks
  ALSA: emux: Stop voices before freeing zones in all cases
  ALSA: emux: Fix UAF of soundfont zones at note-on
  ALSA: mtpav: restore negation dropped in guard() conversion
  ALSA: compress: reject restarting an ACTIVE task via origin_seqno
  ALSA: compress: add missing OPEN-state gate to SET_METADATA
  ALSA: compress: reject buffer geometry change on gapless next_track
  ALSA: compress: fix buffer leak on failed SET_PARAMS
  ALSA: hda/realtek: Enable jack detection on Minisforum AI X1
  ...

Pull tty / serial driver updates from Greg KH:
 "Here is the "big" set of tty and serial driver updates for 7.4-rc1.

  It's not really all that big, it's been kind of quiet in this area of
  the tree this development cycle in relation to other parts of the
  tree. But still, included in here are:

   - 8250 port updates and fixes

   - 8250 driver cleanups by Jiri

   - deletion of the obsolete moxa driver (making this pull request
     remove more lines than added!)

   - different serial driver updates for dma and other reported issues

  All of these have been in linux-next with no reported problems"

* tag 'tty-7.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (91 commits)
  tty: hvc: dcc: Detect JTAG connection only on CPU core 0
  serial: earlycon: Use isdigit() in earlycon_init()
  serial: core: Use isdigit() in uart_parse_options()
  dt-bindings: serial: snps-dw-apb-uart: Add Synaptics sl2610 uart
  serial: amba-pl011: drive the bus during break in RS485 mode
  serial: mcf: update author email address
  serial: pmac_zilog: report received breaks
  serial: pmac_zilog: push received data to the port that received it
  serial: amba-pl011: keep transmitter enabled when disabling RS485
  serial: ma35d1: Do not force-enable an unselected console
  serial: amba-pl011: honour delay_rts_before_send for every write
  Revert "serial: 8250_port: Drop duplicate NULL check"
  serial: 8250: make port operations work on struct uart_8250_port
  serial: 8250_omap: set priv->line before enabling the IRQ
  serial: 8250_lpss: do not touch uninitialized line in ehl_serial_exit()
  serial: 8250_exar: store the GPIO platform device in struct exar8250
  serial: 8250_exar: remove useless void * casts
  serial: 8250: drop err label from serial8250_register_8250_port()
  serial: core: fix TIOCSSERIAL and TIOCSERCONFIG on uninitialised ports
  serial: max310x: don't transmit while an RS485 reconfigure is pending
  ...

Pull PCI updates from Bjorn Helgaas:
 "Enumeration:

   - Set supported_speeds in set_pcie_port_type() so sparc64 and
     powerpc, which call it via of_create_pci_dev() instead of the usual
     pci_setup_device(), correctly set the supported PCIe link speeds
     (Stian Halseth)

   - When pcie_set_mps() changes MPS, update the value in the saved
     state so a subsequent restore doesn't restore an invalid value
     (Niklas Cassel)

   - Skip Target Speed quirk on clamped ports with no link (Maciej W.
     Rozycki)

  Driver binding:

   - Assume control of portdrv-related features only when portdrv is
     enabled, since we can't use them without portdrv (Kuppuswamy
     Sathyanarayanan)

   - Centralize feature ownership checking so code only needs to check
     'host->native_X' and doesn't need to also check 'pcie_ports_native'
     (Kuppuswamy Sathyanarayanan)

  Error handling:

   - Fix leaks when ACPI APEI/GHES error events overflow the kfifo or
     mention a device that no longer exists (Priyank Rathod)

   - Fix aer_process_err_devices() leak when a device is recorded as an
     error source purely by being mentioned in the Root Port Error
     Source and the device is inaccessible or logged only masked errors
     (Priyank Rathod)

  ASPM:

   - Disable ASPM when drivers request that, even if the OS doesn't own
     ASPM; otherwise drivers do it on their own, which is worse (Ilpo
     Järvinen)

  Power management:

   - Align hibernate poweroff flow with suspend flow for bridges so they
     can be powered down at hibernate as they are for suspend (Mario
     Limonciello)

   - Restore BARs after powering up during enumeration to fix a
     regression on devices that don't preserve state in D3hot (Keng-Yu
     Lin)

   - Avoid D3 on PLX PEX 8532/8533/8548 downstream ports, where putting
     them in D3hot takes down the whole switch (Imre Kaloz)

  Power control:

   - Add GPIO driver for Toshiba TC9563 embedded GPIO controller (Alex
     Elder)

   - Add DT documentation and pwrctrl driver support for TC9563 embedded
     GPIO controller (Lorenzo Bianconi)

   - Switch the tc9563 per-port reset to use the GPIO descriptor API
     instead of direct regmap accesses (Lorenzo Bianconi)

   - Only destroy devices created by pwrctrl core, so that when removing
     a PCIe controller driver that uses pwrctrl, we don't remove devices
     populated by another mechanism (Shawn Lin)

   - Power off child devices on power-on failure (Lorenzo Bianconi)

  PCIe native device hotplug:

   - Make the 'pciehp_poll_mode' parameter read-only to prevent changes
     via sysfs, which can cause errors when unbinding (Runyu Xiao)

  Virtualization:

   - Read SR-IOV VF Revision ID and Subsystem ID from VF instead of
     assuming they're the same as VF 0; they may differ (Logan Odell)

   - Add ACS quirk for Pericom PI7C9X2G304 switches (Hans de Goede)

  Peer-to-peer DMA:

   - Add Zhaoxin KX-6000, KH-40000, KX-6000G, KX-7000, and KH-50000 host
     bridges to allowlist (LeoLiu-oc)

   - Add Alibaba T-HEAD Yitian 710 host bridge to allowlist (Feng Tang)

   - Add Intel Haswell client host bridge to allowlist (Scott Lee)

   - Intel Xeon E3/E5/E7 0x6f00 host bridge to allowlist (kai zhang)

   - Fix handling of errors in pci_p2pdma_add_resource() to avoid (a)
     unmapping a BAR if registering another fails and (b) use after free
     of p2p_pgmap (Leon Romanovsky)

   - Wait for RCU readers before freeing state to avoid use-after-free
     of pdev->p2pdma (Leon Romanovsky)

   - Restrict pci_p2pmem_find_many() to providers backed by a pool (Leon
     Romanovsky)

   - Safely terminate ACS redirect lists to avoid out-of-bounds access
     to the buffer (Leon Romanovsky)

   - Silence 'Host bridge not in P2PDMA whitelist' warnings unless
     caller, e.g., pci_p2pmem_find_many(), requests 'verbose' (Leon
     Romanovsky)

  Sysfs:

   - Return -ENODEV or -EIO sysfs 'label' or 'acpi_index' attributes
     when Device Name _DSM fails, not -1, which is interpreted as -EPERM
     (Krzysztof Wilczyński)

   - Return valid sysfs 'acpi_index' attribute even if the Device Name
     _DSM returned an invalid 'label' (Krzysztof Wilczyński)

   - Expose sysfs 'acpi_index' and 'label' based on whether the Device
     Name _DSM returns valid data, not merely whether the _DSM is
     implemented (Krzysztof Wilczyński)

   - Avoid out-of-bounds reads of the label returned by the Device Name
     _DSM, which is in UTF-16 characters, not bytes (Krzysztof
     Wilczyński)

   - Reject unaligned resource I/O port accesses, which can oops on
     arm64 (Deepanshu Kartikey)

Endpoint framework:

   - Pass the correct physical and virtual endpoint function numbers
     when setting translation of inbound memory windows (Koichiro Den)

   - Make embedded doorbell IRQ non-shared, since currently only the
     first EPF can allocate doorbells (Koichiro Den)

   - MSI doorbells currently target the first EPF attached to an EPC;
     let other EPFs try the embedded doorbell instead of failing when
     they can't use the MSI doorbell (Koichiro Den)

   - Serialize scan of vNTB virtual PCI bus with other PCI topology
     changes (Koichiro Den)

   - Manage vNTB lifetimes to avoid leaking virtual devices and buses
     and allow removal (Koichiro Den)

   - Track vNTB link state from both sides so both see the same
     effective link state (Koichiro Den)

   - Configure vNTB MSI-X when supported to avoid IOMMU faults and
     failure to deliver doorbell interrupts on RC (Koichiro Den)

  APM X-Gene PCIe controller driver:

   - Use devm for clocks so they're automatically disabled, unprepared,
     and released if errors happen during probe (Yuho Choi)

  ASPEED PCIe controller driver:

   - Fix clk and PHY leaks in aspeed_pcie_port_init() error paths (Liu
     Zhenlong)

  Broadcom iProc PCIe controller driver:

   - Expose devm_pci_alloc_host_bridge_release() so drivers can share a
     devm release function even if they don't need the device tree
     parsing done by devm_pci_alloc_host_bridge() (Bjorn Helgaas)

   - Request only the memory window from BCMA Enumeration ROM and warn
     if it doesn't match the one in DT, which fixes an iproc-bcma probe
     failure (Semih Baskan)

  Broadcom STB PCIe controller driver:

   - Replace bool properties for each SoC configuration with a u32
     bitvector and a BFLAG() helper (Jim Quinlan)

   - Use a similar BQUIRK() helper to test various SoC quirks (Jim
     Quinlan)

  Cadence PCIe controller driver:

   - Remove device links to PHY, which are redundant because the PHY
     core itself adds them (Vladimir Oltean)

   - Return error (not success) from cdns_plat_pcie_probe() if
     pm_runtime_get_sync() or cdns_pcie_ep_setup() failed (Vladimir
     Oltean)

   - Correct the driver data pointer usage; previously .probe() stored
     'struct cdns_plat_pcie *', but .shutdown() used the pointer as
     'struct cdns_pcie *', resulting in accessing garbage (Linmao Li)

  ESWIN PCIe controller driver:

   - Publish the platform driver MODULE_DEVICE_TABLE so the driver can
     be autoloaded when built as a module (Pengpeng Hou)

  Freescale i.MX6 PCIe controller driver:

   - Fix resource and pwrctrl device leaks .probe() (Zhijian Han)

   - Improve i.MX95 Gen3 link stability by changing MPLLB_BANDWIDTH from
     default 120 to 140 (Richard Zhu)

   - Use dev_err_probe() in host init error path to silence
     -EPROBE_DEFER messages (Alexander Stein)

   - Avoid dereferencing NULL clock names when 'clocks' includes more
     phandles than 'clock-names' has names (Rudi Heitbaum)

   - Add suspend_poweroff flag so platforms like i.MX that power off RC
     controllers during suspend can enter L2 so endpoints can get
     PME_Turn_Off notifications before power loss (Richard Zhu)

  Freescale Layerscape PCIe controller driver:

   - Enable PROBE_PREFER_ASYNCHRONOUS to reduce probe time of the four
     controllers on LX2160A (Vincent Jardin)

  Intel VMD host bridge driver:

   - Flush DMA writes before handling MSI on Meteor Lake: MSI may arrive
     before write has completed, resulting in an nvme 30 second stall
     before a QID timeout and possibly other similar problems (Rickey
     Bartlett)

   - Flush DMA writes before handling MSI on Arrow Lake (Vladimir
     Nedoshivin)

  Marvell Aardvark PCIe controller driver:

   - Disable PHY on probe failures (Myeonghun Pak)

  Marvell MVEBU PCIe controller driver:

   - Refcount child OF nodes during .probe() to make a concurrent OF
     overlay removal safe (Krzysztof Kozlowski)

  MediaTek PCIe controller driver:

   - Find INTx DT property by 'interrupt-controller' name instead of
     assuming it's the first child node (Zhengping Zhang)

  MediaTek PCIe Gen3 controller driver:

   - Fix a 64-bit type truncation in mtk_pcie_set_trans_table() to avoid
     issues with windows above or larger than 4GB (Sreeraj S Kurup)

  NVIDIA Tegra264 PCIe controller driver:

   - Fix the Link Capabilities offset so we read the correct register
     (Bjorn Helgaas)

  Qualcomm PCIe controller driver:

   - Only collect reset GPIOs from PCI bridge DT nodes to avoid stealing
     resets used by downstream devices like USB controllers (Christopher
     Obbard)

   - Block accesses to downstream devices on link down to reduce a storm
     of Completion Timeout AER interrupts (Qiang Yu)

   - Skip system suspend/resume for firmware-managed PCIe, where
     firmware manages clocks, regulators, resets, etc (Mrinmay Sarkar)

   - Honor IOMMU provider's #iommu-cells in qcom_pcie_config_sid_1_9_0()
     (Manivannan Sadhasivam)

   - Deinitialize endpoint on remove (Guangshuo Li)

   - Treat Root Port error recovery as successful even if link doesn't
     come up after reset because the device was hot-unplugged (Konrad
     Dybcio)

   - Skip unnecessary iMSI-RX initialization if DT 'msi-map' is present,
     indicating an external MSI controller (Ayiluri Naga Rashmi)

  Renesas R-Car PCIe controller driver:

   - Limit Max_Read_Request_Size to 256 to avoid hardware erratum (Marek
     Vasut)

   - Support PERST# via reset subsystem as well as the existing GPIO
     support to prepare for R-Car Gen5 SoCs (Marek Vasut)

   - Add DT and driver support for the R-Car Gen 5 X5H (R8A78000) PCIe
     Gen 4 core (Marek Vasut)

   - Add Application/Local register reset DT description and driver
     support for both host and endpoint mode (Marek Vasut)

   - Add PM ops so controller works after suspend/resume (Marek Vasut)

  Renesas RZ/G3S PCIe controller driver:

   - Disable refclk on probe failure (Lad Prabhakar)

   - Propagate platform_get_irq_byname() errors so probe deferral works
     correctly (Lad Prabhakar)

   - Tear down INTx handlers if subsequent initialization fails (Lad
     Prabhakar)

   - Add RZ/G3L (R9A08G046) DT and driver support (Biju Das)

  Rockchip PCIe controller driver:

   - Limit host and endpoint controllers to 2.5 GT/s since 5.0 GT/s is
     unsafe per Rockchip (Geraldo Nascimento)

  Synopsys DesignWare PCIe controller driver:

   - Set DMA_BYPASS bit in outbound IATU CTRL2 register to avoid data
     corruption if the iATU translates DMA engine transactions (Sumit
     Kumar)

   - Use FIELD_PREP() to remove need for *_SHIFT definitions (Hans
     Zhang)

  TI DRA7xx PCIe controller driver:

   - Remove device links to PHY, which are redundant because the PHY
     core itself adds them (Vladimir Oltean)

   - Fix optional clock leak when .probe() fails by using
     devm_clk_get_optional_enabled() (Felix Gu)

  TI Keystone PCIe controller driver:

   - Remove device links to PHY, which are redundant because the PHY
     core itself adds them (Vladimir Oltean)

  UltraRISC PCIe controller driver:

   - Allow DWC drivers to skip outbound iATU setup if they don't need
     translation between CPU and PCI addresses (Xincheng Zhang)

   - Skip MEM outbound iATU setup on DP1000 (Xincheng Zhang)

  Xilinx Versal CPM PCIe controller driver:

   - Add DT and driver support for optional PERST# for use in warm reset
     scenarios (Sai Krishna Musham)

  Xilinx XDMA PCIe controller driver:

   - Fix device node reference leak in xilinx_pl_dma_pcie_init_irq_domain()
     (Wentao Liang)"

* tag 'pci-v7.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (139 commits)
  PCI/pwrctrl: Power off child devices on power-on failure
  PCI/pwrctrl: Only destroy devices created by pwrctrl core
  PCI/pwrctrl: generic: Fix leaking array from of_regulator_bulk_get_all()
  PCI/pwrctrl: tc9563: Switch per-port reset to GPIO descriptor API
  PCI/pwrctrl: tc9563: Add GPIO auxiliary device support
  dt-bindings: PCI: toshiba,tc9563: Document embedded GPIO controller
  gpio: tc9563: Add support for the embedded GPIO controller
  PCI: qcom: Skip DWC MSI host initialization when DT 'msi-map' is present
  PCI: qcom: Ignore -ENODEV after Root Port reset
  PCI: qcom-ep: Deinitialize endpoint on remove
  PCI/sysfs: Reject unaligned resource I/O port accesses
  PCI: rcar-gen4: Add missing PM ops
  PCI: endpoint: pci-epf-vntb: Honor MSI-X selection
  PCI: endpoint: pci-epf-vntb: Use a local epf pointer in interrupt setup
  PCI: dwc: imx6: Use regmap_assign_bits() for conditional set/clear
  PCI: dwc: Describe DWC PCIe fields with full masks and FIELD_PREP()
  PCI: dwc: Rename pp->irq_domain to pp->msi_irq_domain
  PCI: dwc: Rename dw_pcie_allocate_domains() to dw_pcie_allocate_msi_domains()
  PCI: dwc: Correct PCIE_DW_PLAT_EP reference in Kconfig help
  PCI/ASPM: Disable ASPM when driver requests it
  ...