linux-toradex.git/drivers/acpi, branch v3.14.57

ACPICA: Tables: Fix an issue that FACS initialization is performed twice

2015-08-03T16:29:57+00:00

commit c04be18448355441a0c424362df65b6422e27bda upstream.

ACPICA commit 90f5332a15e9d9ba83831ca700b2b9f708274658

This patch adds a new FACS initialization flag for acpi_tb_initialize().
acpi_enable_subsystem() might be invoked several times in OS bootup process,
and we don't want FACS initialization to be invoked twice. Lv Zheng.

Link: https://github.com/acpica/acpica/commit/90f5332a
Signed-off-by: Lv Zheng 
Signed-off-by: Bob Moore 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

ACPI / init: Switch over platform to the ACPI mode later

2015-08-03T16:29:50+00:00

commit b064a8fa77dfead647564c46ac8fc5b13bd1ab73 upstream.

Commit 73f7d1ca3263 "ACPI / init: Run acpi_early_init() before
timekeeping_init()" moved the ACPI subsystem initialization,
including the ACPI mode enabling, to an earlier point in the
initialization sequence, to allow the timekeeping subsystem
use ACPI early.  Unfortunately, that resulted in boot regressions
on some systems and the early ACPI initialization was moved toward
its original position in the kernel initialization code by commit
c4e1acbb35e4 "ACPI / init: Invoke early ACPI initialization later".

However, that turns out to be insufficient, as boot is still broken
on the Tyan S8812 mainboard.

To fix that issue, split the ACPI early initialization code into
two pieces so the majority of it still located in acpi_early_init()
and the part switching over the platform into the ACPI mode goes into
a new function, acpi_subsystem_init(), executed at the original early
ACPI initialization spot.

That fixes the Tyan S8812 boot problem, but still allows ACPI
tables to be loaded earlier which is useful to the EFI code in
efi_enter_virtual_mode().

Link: https://bugzilla.kernel.org/show_bug.cgi?id=97141
Fixes: 73f7d1ca3263 "ACPI / init: Run acpi_early_init() before timekeeping_init()"
Reported-and-tested-by: Marius Tolzmann 
Signed-off-by: Rafael J. Wysocki 
Acked-by: Toshi Kani 
Reviewed-by: Hanjun Guo 
Reviewed-by: Lee, Chun-Yi 
Signed-off-by: Greg Kroah-Hartman

ACPI / init: Fix the ordering of acpi_reserve_resources()

2015-06-06T15:19:39+00:00

commit b9a5e5e18fbf223502c0b2264c15024e393da928 upstream.

Since acpi_reserve_resources() is defined as a device_initcall(),
there's no guarantee that it will be executed in the right order
with respect to the rest of the ACPI initialization code.  On some
systems this leads to breakage if, for example, the address range
that should be reserved for the ACPI fixed registers is given to
the PCI host bridge instead if the race is won by the wrong code
path.

Fix this by turning acpi_reserve_resources() into a void function
and calling it directly from within the ACPI initialization sequence.

Reported-and-tested-by: George McCollister 
Link: http://marc.info/?t=143092384600002&r=1&w=2
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

ACPICA: Utilities: Cleanup to remove useless ACPI_PRINTF/FORMAT_xxx helpers.

2015-05-17T16:53:51+00:00

commit 1d0a0b2f6df2bf2643fadc990eb143361eca6ada upstream.

ACPICA commit b60612373a4ef63b64a57c124576d7ddb6d8efb6

For physical addresses, since the address may exceed 32-bit address range
after calculation, we should use 0x%8.8X%8.8X instead of ACPI_PRINTF_UINT
and ACPI_FORMAT_UINT64() instead of
ACPI_FORMAT_NATIVE_UINT()/ACPI_FORMAT_TO_UINT().

This patch also removes above replaced macros as there are no users.

This is a preparation to switch acpi_physical_address to 64-bit on 32-bit
kernel builds.

Link: https://github.com/acpica/acpica/commit/b6061237
Signed-off-by: Lv Zheng 
Signed-off-by: Bob Moore 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Dirk Behme 
Signed-off-by: George G. Davis 
Signed-off-by: Greg Kroah-Hartman

ACPICA: Utilities: Cleanup to convert physical address printing formats.

2015-05-17T16:53:51+00:00

commit cc2080b0e5a7c6c33ef5e9ffccbc2b8f6f861393 upstream.

ACPICA commit 7f06739db43a85083a70371c14141008f20b2198

For physical addresses, since the address may exceed 32-bit address range
after calculation, we should use %8.8X%8.8X (see ACPI_FORMAT_UINT64()) to
convert the %p formats.

This is a preparation to switch acpi_physical_address to 64-bit on 32-bit
kernel builds.

Link: https://github.com/acpica/acpica/commit/7f06739d
Signed-off-by: Lv Zheng 
Signed-off-by: Bob Moore 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Dirk Behme 
[gdavis: Apply changes to drivers/acpi/acpica/{tbutils,tbxfload}.c]
Signed-off-by: George G. Davis 
Signed-off-by: Greg Kroah-Hartman

ACPICA: Utilities: Cleanup to enforce ACPI_PHYSADDR_TO_PTR()/ACPI_PTR_TO_PHYSADDR().

2015-05-17T16:53:51+00:00

commit 6d3fd3cc33d50e4c0d0c0bd172de02caaec3127c upstream.

ACPICA commit 154f6d074dd38d6ebc0467ad454454e6c5c9ecdf

There are code pieces converting pointers using "(acpi_physical_address) x"
or "ACPI_CAST_PTR (t, x)" formats, this patch cleans up them.

Known issues:
1. Cleanup of "(ACPI_PHYSICAL_ADDRRESS) x" for a table field
   For the conversions around the table fields, it is better to fix it with
   alignment also fixed. So this patch doesn't modify such code. There
   should be no functional problem by leaving them unchanged.

Link: https://github.com/acpica/acpica/commit/154f6d07
Signed-off-by: Lv Zheng 
Signed-off-by: Bob Moore 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Dirk Behme 
Signed-off-by: George G. Davis 
Signed-off-by: Greg Kroah-Hartman

ACPICA: Tables: Change acpi_find_root_pointer() to use acpi_physical_address.

2015-05-17T16:53:51+00:00

commit f254e3c57b9d952e987502aefa0804c177dd2503 upstream.

ACPICA commit 7d9fd64397d7c38899d3dc497525f6e6b044e0e3

OSPMs like Linux expect an acpi_physical_address returning value from
acpi_find_root_pointer(). This triggers warnings if sizeof (acpi_size) doesn't
equal to sizeof (acpi_physical_address):
  drivers/acpi/osl.c:275:3: warning: passing argument 1 of 'acpi_find_root_pointer' from incompatible pointer type [enabled by default]
  In file included from include/acpi/acpi.h:64:0,
                   from include/linux/acpi.h:36,
                   from drivers/acpi/osl.c:41:
  include/acpi/acpixf.h:433:1: note: expected 'acpi_size *' but argument is of type 'acpi_physical_address *'
This patch corrects acpi_find_root_pointer().

Link: https://github.com/acpica/acpica/commit/7d9fd643
Signed-off-by: Lv Zheng 
Signed-off-by: Bob Moore 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Dirk Behme 
Signed-off-by: George G. Davis 
Signed-off-by: Greg Kroah-Hartman

ACPI / scan: Annotate physical_node_lock in acpi_scan_is_offline()

2015-05-06T19:59:18+00:00

commit 4c533c801d1c9b5c38458a0e7516e0cf50643782 upstream.

acpi_scan_is_offline() may be called under the physical_node_lock
lock of the given device object's parent, so prevent lockdep from
complaining about that by annotating that instance with
SINGLE_DEPTH_NESTING.

Fixes: caa73ea158de (ACPI / hotplug / driver core: Handle containers in a special way)
Reported-and-tested-by: Xie XiuQi 
Reviewed-by: Toshi Kani 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

cpuidle: ACPI: do not overwrite name and description of C0

2015-04-19T08:11:08+00:00

commit c7e8bdf5872c5a8f5a6494e16fe839c38a0d3d3d upstream.

Fix a bug that leads to showing the name and description of C-state C0
as "" in sysfs after the ACPI C-states changed (e.g. after AC->DC
or DC->AC
transition).

The function poll_idle_init() in drivers/cpuidle/driver.c initializes the
state 0 during cpuidle_register_driver(), so we better do not overwrite it
again with '\0' during acpi_processor_cst_has_changed().

Signed-off-by: Thomas Schlichter 
Reviewed-by: Bartlomiej Zolnierkiewicz 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

ACPI / video: Load the module even if ACPI is disabled

2015-03-18T12:31:34+00:00

commit 6e17cb12881ba8d5e456b89f072dc6b70048af36 upstream.

i915.ko depends upon the acpi/video.ko module and so refuses to load if
ACPI is disabled at runtime if for example the BIOS is broken beyond
repair. acpi/video provides an optional service for i915.ko and so we
should just allow the modules to load, but do no nothing in order to let
the machines boot correctly.

Reported-by: Bill Augur 
Signed-off-by: Chris Wilson 
Cc: Daniel Vetter 
Cc: Jani Nikula 
Acked-by: Aaron Lu 
[ rjw: Fixed up the new comment in acpi_video_init() ]
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman