linux-toradex.git/drivers/acpi, branch v3.7.4

ACPI : do not use Lid and Sleep button for S5 wakeup

2013-01-17T16:46:24+00:00

commit b7e383046c2c7c13ad928cd7407eafff758ddd4b upstream.

When system enters power off, the _PSW of Lid device is enabled.
But this may cause the system to reboot instead of power off.

A proper way to fix this is to always disable lid wakeup capability for S5.

References: https://bugzilla.kernel.org/show_bug.cgi?id=35262
Signed-off-by: Zhang Rui 
Signed-off-by: Rafael J. Wysocki 
Cc: Joseph Salisbury 
Signed-off-by: Greg Kroah-Hartman

ACPI / scan: Do not use dummy HID for system bus ACPI nodes

2013-01-11T17:18:36+00:00

commit 4f5f64cf0cc916220aaa055992e31195470cfe37 upstream.

At one point acpi_device_set_id() checks if acpi_device_hid(device)
returns NULL, but that never happens, so system bus devices with an
empty list of PNP IDs are given the dummy HID ("device") instead of
the "system bus HID" ("LNXSYBUS").  Fix the code to use the right
check.

Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

ACPI: do acpisleep dmi check when CONFIG_ACPI_SLEEP is set

2013-01-11T17:18:35+00:00

commit 0ac1b1d7b7424cd6f129b5454b504b3cae746f0e upstream.

The current acpisleep DMI checks only run when CONFIG_SUSPEND is set.
And this may break hibernation on some platforms when CONFIG_SUSPEND
is cleared.

Move acpisleep DMI check into #ifdef CONFIG_ACPI_SLEEP instead.

[rjw: Added acpi_sleep_dmi_check() and rebased on top of earlier
 patches adding entries to acpisleep_dmi_table[].]
References: https://bugzilla.kernel.org/show_bug.cgi?id=45921
Signed-off-by: Zhang Rui 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

ACPI / video: Add "Asus UL30VT" to ACPI video detect blacklist

2012-12-17T19:07:20+00:00

commit d0c2ce16bec0afa6013b4c5220ca4c9c67210215 upstream.

The ACPI video driver can't control backlight correctly on
Asus UL30VT.  Vendor driver (asus-laptop) can work.  This patch is to
add "Asus UL30VT" to ACPI video detect blacklist in order to use
asus-laptop for video control on the "Asus UL30VT" rather than ACPI
video driver.

References: https://bugzilla.kernel.org/show_bug.cgi?id=32592
Reported-by: Alex Williamson 
Signed-off-by: Lan Tianyu 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

ACPI / video: ignore BIOS initial backlight value for HP Folio 13-2000

2012-12-17T19:07:20+00:00

commit 129ff8f8d58297b04f47b5d6fad81aa2d08404e1 upstream.

Or else the laptop will boot with a dimmed screen.

References: https://bugzilla.kernel.org/show_bug.cgi?id=51141
Tested-by: Stefan Nagy 
Signed-off-by: Zhang Rui 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

ACPI / PM: Add Sony Vaio VPCEB1S1E to nonvs blacklist.

2012-12-17T19:07:19+00:00

commit 876ab79055019e248508cfd0dee7caa3c0c831ed upstream.

Sony Vaio VPCEB1S1E does not resume correctly without
acpi_sleep=nonvs, so add it to the ACPI sleep blacklist.

References: https://bugzilla.kernel.org/show_bug.cgi?id=48781
Reported-by: Sébastien Wilmet 
Signed-off-by: Lan Tianyu 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

ACPI / battery: Correct battery capacity values on Thinkpads

2012-12-17T19:07:18+00:00

commit 4000e626156935dfb626321ce09cae2c833eabbb upstream.

Add a quirk to correctly report battery capacity on 2010 and 2011
Lenovo Thinkpad models.

The affected models that I tested (x201, t410, t410s, and x220)
exhibit a problem where, when battery capacity reporting unit is mAh,
the values being reported are wrong.  Pre-2010 and 2012 models appear
to always report in mWh and are thus unaffected.  Also, in mid-2012
Lenovo issued a BIOS update for the 2011 models that fixes the issue
(tested on x220 with a post-1.29 BIOS).  No such update is available
for the 2010 models, so those still need this patch.

Problem description: for some reason, the affected Thinkpads switch
the reporting unit between mAh and mWh; generally, mAh is used when a
laptop is plugged in and mWh when it's unplugged, although a
suspend/resume or rmmod/modprobe is needed for the switch to take
effect.  The values reported in mAh are *always* wrong.  This does
not appear to be a kernel regression; I believe that the values were
never reported correctly.  I tested back to kernel 2.6.34, with
multiple machines and BIOS versions.

Simply plugging a laptop into mains before turning it on is enough to
reproduce the problem.  Here's a sample /proc/acpi/battery/BAT0/info
from Thinkpad x220 (before a BIOS update) with a 4-cell battery:

present:                 yes
design capacity:         2886 mAh
last full capacity:      2909 mAh
battery technology:      rechargeable
design voltage:          14800 mV
design capacity warning: 145 mAh
design capacity low:     13 mAh
cycle count:              0
capacity granularity 1:  1 mAh
capacity granularity 2:  1 mAh
model number:            42T4899
serial number:           21064
battery type:            LION
OEM info:                SANYO

Once the laptop switches the unit to mWh (unplug from mains, suspend,
resume), the output changes to:

present:                 yes
design capacity:         28860 mWh
last full capacity:      29090 mWh
battery technology:      rechargeable
design voltage:          14800 mV
design capacity warning: 1454 mWh
design capacity low:     200 mWh
cycle count:              0
capacity granularity 1:  1 mWh
capacity granularity 2:  1 mWh
model number:            42T4899
serial number:           21064
battery type:            LION
OEM info:                SANYO

Can you see how the values for "design capacity", etc., differ by a
factor of 10 instead of 14.8 (the design voltage of this battery)?
On the battery itself it says: 14.8V, 1.95Ah, 29Wh, so clearly the
values reported in mWh are correct and the ones in mAh are not.

My guess is that this problem has been around ever since those
machines were released, but because the most common Thinkpad
batteries are rated at 10.8V, the error (8%) is small enough that it
simply hasn't been noticed or at least nobody could be bothered to
look into it.

My patch works around the problem by adjusting the incorrectly
reported mAh values by "10000 / design_voltage".  The patch also has
code to figure out if it should be activated or not.  It only
activates on Lenovo Thinkpads, only when the unit is mAh, and, as an
extra precaution, only when the battery capacity reported through
ACPI does not match what is reported through DMI (I've never
encountered a machine where the first two conditions would be true
but the last would not, but better safe than sorry).

I've been using this patch for close to a year on several systems
without any problems.

References: https://bugzilla.kernel.org/show_bug.cgi?id=41062
Acked-by: Henrique de Moraes Holschuh 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

ACPI video: Ignore errors after _DOD evaluation.

2012-11-03T01:52:54+00:00

There are systems where video module known to work fine regardless
of broken _DOD and ignoring returned value here doesn't cause
any issues later. This should fix brightness controls on some laptops.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=47861

Signed-off-by: Igor Murzov 
Reviewed-by: Sergey V 
Signed-off-by: Zhang Rui

ACPI: missing break

2012-10-25T23:05:56+00:00

We handle NOTIFY_THROTTLING so don't then fall through to unsupported event.

Signed-off-by: Alan Cox 
Signed-off-by: Rafael J. Wysocki

ACPI: Fix memory leak in acpi_bind_one()

2012-10-22T22:53:58+00:00

Memory is allocated with kzalloc() and assigned to
'physical_node'. Then 'physical_node->node_id' is initialized with a
call to 'find_first_zero_bit()', if that results in a value greater
than ACPI_MAX_PHYSICAL_NODE we'll end up jumping to the 'err:' label
and there leave the function and let 'physical_node' go out of scope
and leak the memory we allocated.
This patch fixes the leak by simply freeing the unused/unneeded memory
pointed to by 'physical_node' just before we jump to 'err:'.

[rjw: The problem has been introduced by commit 1033f90 (ACPI: Allow
 ACPI binding with USB-3.0 hub), which is new in 3.7-rc.]

Signed-off-by: Jesper Juhl 
Reviewed-by: Toshi Kani 
Reviewed-by: Yasuaki Ishimatsu 
Acked-by: David Rientjes 
Signed-off-by: Rafael J. Wysocki