Pull libnvdimm fixes from Dan Williams:
"Two regression fixes, two bug fixes for older issues, two fixes for
new functionality added this cycle that have userspace ABI concerns,
and a small cleanup. These have appeared in a linux-next release and
have a build success report from the 0day robot.
* The 4.16 rework of altmap handling led to some configurations
leaking page table allocations due to freeing from the altmap
reservation rather than the page allocator.
The impact without the fix is leaked memory and a WARN() message
when tearing down libnvdimm namespaces. The rework also missed a
place where error handling code needed to be removed that can lead
to a crash if devm_memremap_pages() fails.
* acpi_map_pxm_to_node() had a latent bug whereby it could
misidentify the closest online node to a given proximity domain.
* Block integrity handling was reworked several kernels back to allow
calling add_disk() after setting up the integrity profile.
The nd_btt and nd_blk drivers are just now catching up to fix
automatic partition detection at driver load time.
* The new peristence_domain attribute, a platform indicator of
whether cpu caches are powerfail protected for example, is meant to
be a single value enum and not a set of flags.
This oversight was caught while reviewing new userspace code in
libndctl to communicate the attribute.
Fix this new enabling up so that we are not stuck with an unwanted
userspace ABI"
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
libnvdimm, nfit: fix persistence domain reporting
libnvdimm, region: hide persistence_domain when unknown
acpi, numa: fix pxm to online numa node associations
x86, memremap: fix altmap accounting at free
libnvdimm: remove redundant assignment to pointer 'dev'
libnvdimm, {btt, blk}: do integrity setup before add_disk()
kernel/memremap: Remove stale devres_free() call
* acpi-wdat: ACPI / watchdog: Fix off-by-one error at resource assignment
The persistence domain is a point in the platform where once writes
reach that destination the platform claims it will make them persistent
relative to power loss. In the ACPI NFIT this is currently communicated
as 2 bits in the "NFIT - Platform Capabilities Structure". The bits
comprise a hierarchy, i.e. bit0 "CPU Cache Flush to NVDIMM Durability on
Power Loss Capable" implies bit1 "Memory Controller Flush to NVDIMM
Durability on Power Loss Capable".
Commit 96c3a239054a "libnvdimm: expose platform persistence attr..."
shows the persistence domain as flags, but it's really an enumerated
hierarchy.
Fix this newly introduced user ABI to show the closest available
persistence domain before userspace develops dependencies on seeing, or
needing to develop code to tolerate, the raw NFIT flags communicated
through the libnvdimm-generic region attribute.
Fixes: 96c3a239054a ("libnvdimm: expose platform persistence attr...")
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The resource allocation in WDAT watchdog has off-one-by error, it sets one byte more than the actual end address. This may eventually lead to unexpected resource conflicts. Fixes: 058dfc767008 (ACPI / watchdog: Add support for WDAT hardware watchdog) Cc: 4.9+ <stable@vger.kernel.org> # 4.9+ Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Revert commit c68f0676ef7d ("ACPI / battery: Add quirk for Asus
GL502VSK and UX305LA") and commit 4446823e2573 ("ACPI / battery: Add
quirk for Asus UX360UA and UX410UAK").
On many many Asus products, the battery is sometimes reported as
charging or discharging even when it is full and you are on AC power.
This change quirked the kernel to avoid advertising the discharging
state when this happens on 4 laptop models, under the belief that
this was incorrect information. I presume it originates from user
reports who are confused that their battery status icon says that it
is discharging.
However, the reported information is indeed correct, and the quirk
approach taken is inadequate and more thought is needed first.
Specifically:
1. It only quirks discharging state, not charging
2. There are so many different Asus products and DMI naming variants
within those product families that behave this way; Linux could
grow to quirk hundreds of products and still not even be close at
"winning" this battle.
3. Asus previously clarified that this behaviour is intentional. The
platform will periodically do a partial discharge/charge cycle
when the battery is full, because this is one way to extend the
lifetime of the battery (leaving a battery at 100% charge and
unused will decrease its usable capacity over time).
My understanding is that any decent consumer product will have
this behaviour, but it appears that Asus is different in that
they expose this info through ACPI.
However, the behaviour seems correct. The ACPI spec does not
suggest in that the platform should hide the truth. It lets you
report that the battery is full of charge, and discharging, and
with external power connected; and Asus does this.
4. In terms of not confusing the user, this seems like something that
could/should be handled by userspace, which can also detect these
same (accurate) conditions in the general case.
Revert this quirk before it gets included in a release, while we look
for better approaches.
Signed-off-by: Daniel Drake <drake@endlessm.com>
Acked-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 99759869faf1 "acpi: Add acpi_map_pxm_to_online_node()" added
support for mapping a given proximity to its nearest, by SLIT distance,
online node. However, it sometimes returns unexpected results due to the
fact that it switches from comparing the PXM node to the last node that
was closer than the current max.
for_each_online_node(n) {
dist = node_distance(node, n);
if (dist < min_dist) {
min_dist = dist;
node = n; <---- from this point we're using the
wrong node for node_distance()
Fixes: 99759869faf1 ("acpi: Add acpi_map_pxm_to_online_node()")
Cc: <stable@vger.kernel.org>
Reviewed-by: Toshi Kani <toshi.kani@hp.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* acpi-ec: ACPI / EC: Restore polling during noirq suspend/resume phases * acpi-tables: ACPI: SPCR: Mark expected switch fall-through in acpi_parse_spcr * acpi-doc: ACPI: dock: document sysfs interface ACPI / DPTF: Document dptf_power sysfs atttributes
Constify device_get_match_data() as OF and ACPI variants return constant value. Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Do the renaming to be consistent with its sibling, i.e. of_device_get_match_data(). No functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
As well as its sibling of_device_get_match_data() has no such checks, no need to do it in acpi_get_match_data(). First of all, we are not supposed to call fwnode API like this without driver attached. Second, since __acpi_match_device() does check input parameter there is no need to duplicate it outside. And last but not least one, the API should still serve the cases when ACPI device is enumerated via PRP0001. In such case driver has neither ACPI table nor driver data there. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>