Pull RISC-V updates from Palmer Dabbelt:

 - Support for cbo.zero in userspace

 - Support for CBOs on ACPI-based systems

 - A handful of improvements for the T-Head cache flushing ops

 - Support for software shadow call stacks

 - Various cleanups and fixes

* tag 'riscv-for-linus-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (31 commits)
  RISC-V: hwprobe: Fix vDSO SIGSEGV
  riscv: configs: defconfig: Enable configs required for RZ/Five SoC
  riscv: errata: prefix T-Head mnemonics with th.
  riscv: put interrupt entries into .irqentry.text
  riscv: mm: Update the comment of CONFIG_PAGE_OFFSET
  riscv: Using TOOLCHAIN_HAS_ZIHINTPAUSE marco replace zihintpause
  riscv/mm: Fix the comment for swap pte format
  RISC-V: clarify the QEMU workaround in ISA parser
  riscv: correct pt_level name via pgtable_l5/4_enabled
  RISC-V: Provide pgtable_l5_enabled on rv32
  clocksource: timer-riscv: Increase rating of clock_event_device for Sstc
  clocksource: timer-riscv: Don't enable/disable timer interrupt
  lkdtm: Fix CFI_BACKWARD on RISC-V
  riscv: Use separate IRQ shadow call stacks
  riscv: Implement Shadow Call Stack
  riscv: Move global pointer loading to a macro
  riscv: Deduplicate IRQ stack switching
  riscv: VMAP_STACK overflow detection thread-safe
  RISC-V: cacheflush: Initialize CBO variables on ACPI systems
  RISC-V: ACPI: RHCT: Add function to get CBO block sizes
  ...

Pull CXL (Compute Express Link) updates from Dan Williams:
 "The main new functionality this time is work to allow Linux to
  natively handle CXL link protocol errors signalled via PCIe AER for
  current generation CXL platforms. This required some enlightenment of
  the PCIe AER core to workaround the fact that current generation RCH
  (Restricted CXL Host) platforms physically hide topology details and
  registers via a mechanism called RCRB (Root Complex Register Block).

  The next major highlight is reworks to address bugs in parsing region
  configurations for next generation VH (Virtual Host) topologies. The
  old broken algorithm is replaced with a simpler one that significantly
  increases the number of region configurations supported by Linux. This
  is again relevant for error handling so that forward and reverse
  address translation of memory errors can be carried out by Linux for
  memory regions instantiated by platform firmware.

  As for other cross-tree work, the ACPI table parsing code has been
  refactored for reuse parsing the "CDAT" structure which is an
  ACPI-like data structure that is reported by CXL devices. That work is
  in preparation for v6.8 support for CXL QoS. Think of this as dynamic
  generation of NUMA node topology information generated by Linux rather
  than platform firmware.

  Lastly, a number of internal object lifetime issues have been resolved
  along with misc. fixes and feature updates (decoders_committed sysfs
  ABI).

  Summary:

   - Add support for RCH (Restricted CXL Host) Error recovery

   - Fix several region assembly bugs

   - Fix mem-device lifetime issues relative to the sanitize command and
     RCH topology.

   - Refactor ACPI table parsing for CDAT parsing re-use in preparation
     for CXL QOS support"

* tag 'cxl-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (50 commits)
  lib/fw_table: Remove acpi_parse_entries_array() export
  cxl/pci: Change CXL AER support check to use native AER
  cxl/hdm: Remove broken error path
  cxl/hdm: Fix && vs || bug
  acpi: Move common tables helper functions to common lib
  cxl: Add support for reading CXL switch CDAT table
  cxl: Add checksum verification to CDAT from CXL
  cxl: Export QTG ids from CFMWS to sysfs as qos_class attribute
  cxl: Add decoders_committed sysfs attribute to cxl_port
  cxl: Add cxl_decoders_committed() helper
  cxl/core/regs: Rework cxl_map_pmu_regs() to use map->dev for devm
  cxl/core/regs: Rename phys_addr in cxl_map_component_regs()
  PCI/AER: Unmask RCEC internal errors to enable RCH downstream port error handling
  PCI/AER: Forward RCH downstream port-detected errors to the CXL.mem dev handler
  cxl/pci: Disable root port interrupts in RCH mode
  cxl/pci: Add RCH downstream port error logging
  cxl/pci: Map RCH downstream AER registers for logging protocol errors
  cxl/pci: Update CXL error logging to use RAS register address
  PCI/AER: Refactor cper_print_aer() for use by CXL driver module
  cxl/pci: Add RCH downstream port AER register discovery
  ...

Pull ACPI fix from Rafael Wysocki:
 "Fix the acpi_thermal_add() error path that may do a double-free in
  some cases after recent changes (Dan Carpenter)"

* tag 'acpi-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: thermal: Fix acpi_thermal_unregister_thermal_zone() cleanup

Pull MM updates from Andrew Morton:
 "Many singleton patches against the MM code. The patch series which are
  included in this merge do the following:

   - Kemeng Shi has contributed some compation maintenance work in the
     series 'Fixes and cleanups to compaction'

   - Joel Fernandes has a patchset ('Optimize mremap during mutual
     alignment within PMD') which fixes an obscure issue with mremap()'s
     pagetable handling during a subsequent exec(), based upon an
     implementation which Linus suggested

   - More DAMON/DAMOS maintenance and feature work from SeongJae Park i
     the following patch series:

	mm/damon: misc fixups for documents, comments and its tracepoint
	mm/damon: add a tracepoint for damos apply target regions
	mm/damon: provide pseudo-moving sum based access rate
	mm/damon: implement DAMOS apply intervals
	mm/damon/core-test: Fix memory leaks in core-test
	mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval

   - In the series 'Do not try to access unaccepted memory' Adrian
     Hunter provides some fixups for the recently-added 'unaccepted
     memory' feature. To increase the feature's checking coverage. 'Plug
     a few gaps where RAM is exposed without checking if it is
     unaccepted memory'

   - In the series 'cleanups for lockless slab shrink' Qi Zheng has done
     some maintenance work which is preparation for the lockless slab
     shrinking code

   - Qi Zheng has redone the earlier (and reverted) attempt to make slab
     shrinking lockless in the series 'use refcount+RCU method to
     implement lockless slab shrink'

   - David Hildenbrand contributes some maintenance work for the rmap
     code in the series 'Anon rmap cleanups'

   - Kefeng Wang does more folio conversions and some maintenance work
     in the migration code. Series 'mm: migrate: more folio conversion
     and unification'

   - Matthew Wilcox has fixed an issue in the buffer_head code which was
     causing long stalls under some heavy memory/IO loads. Some cleanups
     were added on the way. Series 'Add and use bdev_getblk()'

   - In the series 'Use nth_page() in place of direct struct page
     manipulation' Zi Yan has fixed a potential issue with the direct
     manipulation of hugetlb page frames

   - In the series 'mm: hugetlb: Skip initialization of gigantic tail
     struct pages if freed by HVO' has improved our handling of gigantic
     pages in the hugetlb vmmemmep optimizaton code. This provides
     significant boot time improvements when significant amounts of
     gigantic pages are in use

   - Matthew Wilcox has sent the series 'Small hugetlb cleanups' - code
     rationalization and folio conversions in the hugetlb code

   - Yin Fengwei has improved mlock()'s handling of large folios in the
     series 'support large folio for mlock'

   - In the series 'Expose swapcache stat for memcg v1' Liu Shixin has
     added statistics for memcg v1 users which are available (and
     useful) under memcg v2

   - Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable)
     prctl so that userspace may direct the kernel to not automatically
     propagate the denial to child processes. The series is named 'MDWE
     without inheritance'

   - Kefeng Wang has provided the series 'mm: convert numa balancing
     functions to use a folio' which does what it says

   - In the series 'mm/ksm: add fork-exec support for prctl' Stefan
     Roesch makes is possible for a process to propagate KSM treatment
     across exec()

   - Huang Ying has enhanced memory tiering's calculation of memory
     distances. This is used to permit the dax/kmem driver to use 'high
     bandwidth memory' in addition to Optane Data Center Persistent
     Memory Modules (DCPMM). The series is named 'memory tiering:
     calculate abstract distance based on ACPI HMAT'

   - In the series 'Smart scanning mode for KSM' Stefan Roesch has
     optimized KSM by teaching it to retain and use some historical
     information from previous scans

   - Yosry Ahmed has fixed some inconsistencies in memcg statistics in
     the series 'mm: memcg: fix tracking of pending stats updates
     values'

   - In the series 'Implement IOCTL to get and optionally clear info
     about PTEs' Peter Xu has added an ioctl to /proc/<pid>/pagemap
     which permits us to atomically read-then-clear page softdirty
     state. This is mainly used by CRIU

   - Hugh Dickins contributed the series 'shmem,tmpfs: general
     maintenance', a bunch of relatively minor maintenance tweaks to
     this code

   - Matthew Wilcox has increased the use of the VMA lock over
     file-backed page faults in the series 'Handle more faults under the
     VMA lock'. Some rationalizations of the fault path became possible
     as a result

   - In the series 'mm/rmap: convert page_move_anon_rmap() to
     folio_move_anon_rmap()' David Hildenbrand has implemented some
     cleanups and folio conversions

   - In the series 'various improvements to the GUP interface' Lorenzo
     Stoakes has simplified and improved the GUP interface with an eye
     to providing groundwork for future improvements

   - Andrey Konovalov has sent along the series 'kasan: assorted fixes
     and improvements' which does those things

   - Some page allocator maintenance work from Kemeng Shi in the series
     'Two minor cleanups to break_down_buddy_pages'

   - In thes series 'New selftest for mm' Breno Leitao has developed
     another MM self test which tickles a race we had between madvise()
     and page faults

   - In the series 'Add folio_end_read' Matthew Wilcox provides cleanups
     and an optimization to the core pagecache code

   - Nhat Pham has added memcg accounting for hugetlb memory in the
     series 'hugetlb memcg accounting'

   - Cleanups and rationalizations to the pagemap code from Lorenzo
     Stoakes, in the series 'Abstract vma_merge() and split_vma()'

   - Audra Mitchell has fixed issues in the procfs page_owner code's new
     timestamping feature which was causing some misbehaviours. In the
     series 'Fix page_owner's use of free timestamps'

   - Lorenzo Stoakes has fixed the handling of new mappings of sealed
     files in the series 'permit write-sealed memfd read-only shared
     mappings'

   - Mike Kravetz has optimized the hugetlb vmemmap optimization in the
     series 'Batch hugetlb vmemmap modification operations'

   - Some buffer_head folio conversions and cleanups from Matthew Wilcox
     in the series 'Finish the create_empty_buffers() transition'

   - As a page allocator performance optimization Huang Ying has added
     automatic tuning to the allocator's per-cpu-pages feature, in the
     series 'mm: PCP high auto-tuning'

   - Roman Gushchin has contributed the patchset 'mm: improve
     performance of accounted kernel memory allocations' which improves
     their performance by ~30% as measured by a micro-benchmark

   - folio conversions from Kefeng Wang in the series 'mm: convert page
     cpupid functions to folios'

   - Some kmemleak fixups in Liu Shixin's series 'Some bugfix about
     kmemleak'

   - Qi Zheng has improved our handling of memoryless nodes by keeping
     them off the allocation fallback list. This is done in the series
     'handle memoryless nodes more appropriately'

   - khugepaged conversions from Vishal Moola in the series 'Some
     khugepaged folio conversions'"

[ bcachefs conflicts with the dynamically allocated shrinkers have been
  resolved as per Stephen Rothwell in

     https://lore.kernel.org/all/20230913093553.4290421e@canb.auug.org.au/

  with help from Qi Zheng.

  The clone3 test filtering conflict was half-arsed by yours truly ]

* tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (406 commits)
  mm/damon/sysfs: update monitoring target regions for online input commit
  mm/damon/sysfs: remove requested targets when online-commit inputs
  selftests: add a sanity check for zswap
  Documentation: maple_tree: fix word spelling error
  mm/vmalloc: fix the unchecked dereference warning in vread_iter()
  zswap: export compression failure stats
  Documentation: ubsan: drop "the" from article title
  mempolicy: migration attempt to match interleave nodes
  mempolicy: mmap_lock is not needed while migrating folios
  mempolicy: alloc_pages_mpol() for NUMA policy without vma
  mm: add page_rmappable_folio() wrapper
  mempolicy: remove confusing MPOL_MF_LAZY dead code
  mempolicy: mpol_shared_policy_init() without pseudo-vma
  mempolicy trivia: use pgoff_t in shared mempolicy tree
  mempolicy trivia: slightly more consistent naming
  mempolicy trivia: delete those ancient pr_debug()s
  mempolicy: fix migrate_pages(2) syscall return nr_failed
  kernfs: drop shared NUMA mempolicy hooks
  hugetlbfs: drop shared NUMA mempolicy pretence
  mm/damon/sysfs-test: add a unit test for damon_sysfs_set_targets()
  ...

Pull ia64 removal and asm-generic updates from Arnd Bergmann:

 - The ia64 architecture gets its well-earned retirement as planned,
   now that there is one last (mostly) working release that will be
   maintained as an LTS kernel.

 - The architecture specific system call tables are updated for the
   added map_shadow_stack() syscall and to remove references to the
   long-gone sys_lookup_dcookie() syscall.

* tag 'asm-generic-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  hexagon: Remove unusable symbols from the ptrace.h uapi
  asm-generic: Fix spelling of architecture
  arch: Reserve map_shadow_stack() syscall number for all architectures
  syscalls: Cleanup references to sys_lookup_dcookie()
  Documentation: Drop or replace remaining mentions of IA64
  lib/raid6: Drop IA64 support
  Documentation: Drop IA64 from feature descriptions
  kernel: Drop IA64 support from sig_fault handlers
  arch: Remove Itanium (IA-64) architecture

Pull arm64 updates from Catalin Marinas:
 "No major architecture features this time around, just some new HWCAP
  definitions, support for the Ampere SoC PMUs and a few fixes/cleanups.

  The bulk of the changes is reworking of the CPU capability checking
  code (cpus_have_cap() etc).

   - Major refactoring of the CPU capability detection logic resulting
     in the removal of the cpus_have_const_cap() function and migrating
     the code to "alternative" branches where possible

   - Backtrace/kgdb: use IPIs and pseudo-NMI

   - Perf and PMU:

      - Add support for Ampere SoC PMUs

      - Multi-DTC improvements for larger CMN configurations with
        multiple Debug & Trace Controllers

      - Rework the Arm CoreSight PMU driver to allow separate
        registration of vendor backend modules

      - Fixes: add missing MODULE_DEVICE_TABLE to the amlogic perf
        driver; use device_get_match_data() in the xgene driver; fix
        NULL pointer dereference in the hisi driver caused by calling
        cpuhp_state_remove_instance(); use-after-free in the hisi driver

   - HWCAP updates:

      - FEAT_SVE_B16B16 (BFloat16)

      - FEAT_LRCPC3 (release consistency model)

      - FEAT_LSE128 (128-bit atomic instructions)

   - SVE: remove a couple of pseudo registers from the cpufeature code.
     There is logic in place already to detect mismatched SVE features

   - Miscellaneous:

      - Reduce the default swiotlb size (currently 64MB) if no ZONE_DMA
        bouncing is needed. The buffer is still required for small
        kmalloc() buffers

      - Fix module PLT counting with !RANDOMIZE_BASE

      - Restrict CPU_BIG_ENDIAN to LLVM IAS 15.x or newer move
        synchronisation code out of the set_ptes() loop

      - More compact cpufeature displaying enabled cores

      - Kselftest updates for the new CPU features"

 * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (83 commits)
  arm64: Restrict CPU_BIG_ENDIAN to GNU as or LLVM IAS 15.x or newer
  arm64: module: Fix PLT counting when CONFIG_RANDOMIZE_BASE=n
  arm64, irqchip/gic-v3, ACPI: Move MADT GICC enabled check into a helper
  perf: hisi: Fix use-after-free when register pmu fails
  drivers/perf: hisi_pcie: Initialize event->cpu only on success
  drivers/perf: hisi_pcie: Check the type first in pmu::event_init()
  arm64: cpufeature: Change DBM to display enabled cores
  arm64: cpufeature: Display the set of cores with a feature
  perf/arm-cmn: Enable per-DTC counter allocation
  perf/arm-cmn: Rework DTC counters (again)
  perf/arm-cmn: Fix DTC domain detection
  drivers: perf: arm_pmuv3: Drop some unused arguments from armv8_pmu_init()
  drivers: perf: arm_pmuv3: Read PMMIR_EL1 unconditionally
  drivers/perf: hisi: use cpuhp_state_remove_instance_nocalls() for hisi_hns3_pmu uninit process
  clocksource/drivers/arm_arch_timer: limit XGene-1 workaround
  arm64: Remove system_uses_lse_atomics()
  arm64: Mark the 'addr' argument to set_ptes() and __set_pte_at() as unused
  drivers/perf: xgene: Use device_get_match_data()
  perf/amlogic: add missing MODULE_DEVICE_TABLE
  arm64/mm: Hoist synchronization out of set_ptes() loop
  ...

Pull devicetree updates from Rob Herring:

 - Add a kselftest to check for unprobed DT devices

 - Fix address translation for some 3 address cells cases

 - Refactor firmware node refcounting for AMBA bus

 - Add bindings for qcom,sm4450-pdc, Qualcomm Kryo 465 CPU, and
   Freescale QMC HDLC

 - Add Marantec vendor prefix

 - Convert qcom,pm8921-keypad, cnxt,cx92755-wdt, da9062-wdt, and
   atmel,at91rm9200-wdt bindings to DT schema

 - Several additionalProperties/unevaluatedProperties on child node
   schemas fixes

 - Drop reserved-memory bindings which now live in dtschema project

 - Fix a reference to rockchip,inno-usb2phy.yaml

 - Remove backlight nodes from display panel examples

 - Expand example for using DT_SCHEMA_FILES

 - Merge simple LVDS panel bindings to one binding doc

* tag 'devicetree-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (34 commits)
  dt-bindings: soc: fsl: cpm_qe: cpm1-scc-qmc: Add support for QMC HDLC
  dt-bindings: soc: fsl: cpm_qe: cpm1-scc-qmc: Add 'additionalProperties: false' in child nodes
  dt-bindings: soc: fsl: cpm_qe: cpm1-scc-qmc: Fix example property name
  dt-bindings: arm,coresight-cti: Add missing additionalProperties on child nodes
  dt-bindings: arm,coresight-cti: Drop type for 'cpu' property
  dt-bindings: soundwire: Add reference to soundwire-controller.yaml schema
  dt-bindings: input: syna,rmi4: Make "additionalProperties: true" explicit
  media: dt-bindings: ti,ds90ub960: Add missing type for "i2c-alias"
  dt-bindings: input: qcom,pm8921-keypad: convert to YAML format
  of: overlay: unittest: overlay_bad_unresolved: Spelling s/ok/okay/
  of: address: Consolidate bus .map() functions
  of: address: Store number of bus flag cells rather than bool
  of: unittest: Add tests for address translations
  of: address: Remove duplicated functions
  of: address: Fix address translation when address-size is greater than 2
  dt-bindings: watchdog: cnxt,cx92755-wdt: convert txt to yaml
  dt-bindings: watchdog: da9062-wdt: convert txt to yaml
  dt-bindings: watchdog: fsl,scu-wdt: Document imx8dl
  dt-bindings: watchdog: atmel,at91rm9200-wdt: convert txt to yaml
  dt-bindings: usb: rockchip,dwc3: update inno usb2 phy binding name
  ...

Pull ACPI updates from Rafael Wysocki:
 "These fix issues, add new quirks, rearrange the IRQ override quirk
  definitions, add new helpers and switch over code to using them,
  rework a couple of interfaces to be more flexible, eliminate strncpy()
  usage from PNP, extend the ACPI PCC mailbox driver and clean up code.

  This is based on ACPI thermal driver changes that are present in the
  thermal control updates for 6.7-rc1 pull request (they are depended on
  by the ACPI utilities updates). However, the ACPI thermal driver
  changes are not included in the list of specific ACPI changes below.

  Specifics:

   - Add symbol definitions related to CDAT to the ACPICA code (Dave
     Jiang)

   - Use the acpi_device_is_present() helper in more places and rename
     acpi_scan_device_not_present() to be about enumeration (James
     Morse)

   - Add __printf format attribute to acpi_os_vprintf() (Su Hui)

   - Clean up departures from kernel coding style in the low-level
     interface for ACPICA (Jonathan Bergh)

   - Replace strncpy() with strscpy() in acpi_osi_setup() (Justin Stitt)

   - Fail FPDT parsing on zero length records and add proper handling
     for fpdt_process_subtable() to acpi_init_fpdt() (Vasily Khoruzhick)

   - Rework acpi_handle_list handling so as to manage it dynamically,
     including size computation (Rafael Wysocki)

   - Clean up ACPI utilities code so as to make it follow the kernel
     coding style (Jonathan Bergh)

   - Consolidate IRQ trigger-type override DMI tables and drop .ident
     values from dmi_system_id tables used for ACPI resources management
     quirks (Hans de Goede)

   - Add ACPI IRQ override for TongFang GMxXGxx (Werner Sembach)

   - Allow _DSD buffer data only for byte accessors and document the
     _DSD data buffer GUID (Andy Shevchenko)

   - Drop BayTrail and Lynxpoint pinctrl device IDs from the ACPI LPSS
     driver, because it does not need them (Raag Jadav)

   - Add acpi_backlight=vendor quirk for Toshiba Portégé R100 (Ondrej
     Zary)

   - Add "vendor" backlight quirks for 3 Lenovo x86 Android tablets
     (Hans de Goede)

   - Move Xiaomi Mi Pad 2 backlight quirk to its own section (Hans de
     Goede)

   - Annotate struct prm_module_info with __counted_by (Kees Cook)

   - Fix AER info corruption in aer_recover_queue() when error status
     data has multiple sections (Shiju Jose)

   - Make APEI use ERST maximum execution time for slow devices (Jeshua
     Smith)

   - Add support for platform notification handling to the PCC mailbox
     driver and modify it to support shared interrupts for multiple
     subspaces (Huisong Li)

   - Define common macros to use when referring to various bitfields in
     the PCC generic communications channel command and status fields
     and use them in some drivers (Sudeep Holla)

   - Add EC GPE detection quirk for HP 250 G7 Notebook PC (Jonathan
     Denose)

   - Fix and clean up create_pnp_modalias() and create_of_modalias()
     (Christophe JAILLET)

   - Modify 2 pieces of code to use acpi_evaluate_dsm_typed() (Andy
     Shevchenko)

   - Define acpi_dev_uid_match() for matching _UID and use it in several
     places (Raag Jadav)

   - Use acpi_device_uid() for fetching _UID in 2 places (Raag Jadav)

   - Add context argument to acpi_dev_install_notify_handler() (Rafael
     Wysocki)

   - Clarify ACPI bus concepts in the ACPI device enumeration
     documentation (Rafael Wysocki)

   - Switch over the ACPI AC and ACPI PAD drivers to using the platform
     driver interface which, is more logically consistent than binding a
     driver directly to an ACPI device object, and clean them up (Michal
     Wilczynski)

   - Replace strncpy() in the PNP code with either memcpy() or strscpy()
     as appropriate (Justin Stitt)

   - Clean up coding style in pnp.h (GuoHua Cheng)"

* tag 'acpi-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (54 commits)
  ACPI: resource: Do IRQ override on TongFang GMxXGxx
  perf: arm_cspmu: use acpi_dev_hid_uid_match() for matching _HID and _UID
  ACPI: EC: Add quirk for HP 250 G7 Notebook PC
  ACPI: x86: use acpi_dev_uid_match() for matching _UID
  ACPI: utils: use acpi_dev_uid_match() for matching _UID
  pinctrl: intel: use acpi_dev_uid_match() for matching _UID
  ACPI: utils: Introduce acpi_dev_uid_match() for matching _UID
  ACPI: sysfs: Clean up create_pnp_modalias() and create_of_modalias()
  ACPI: sysfs: Fix create_pnp_modalias() and create_of_modalias()
  ACPI: acpi_pad: Rename ACPI device from device to adev
  ACPI: acpi_pad: Use dev groups for sysfs
  ACPI: acpi_pad: Replace acpi_driver with platform_driver
  ACPI: APEI: Use ERST timeout for slow devices
  ACPI: scan: Rename acpi_scan_device_not_present() to be about enumeration
  PNP: replace deprecated strncpy() with memcpy()
  PNP: ACPI: replace deprecated strncpy() with strscpy()
  perf: qcom: use acpi_device_uid() for fetching _UID
  ACPI: sysfs: use acpi_device_uid() for fetching _UID
  ACPI: scan: Use the acpi_device_is_present() helper in more places
  ACPI: AC: Rename ACPI device from device to adev
  ...

Pull thermal control updates from Rafael Wysocki:
 "These further rework the ACPI thermal driver, after the changes made
  to it in the previous cycle, to make it easier to grasp, get rid of
  redundant pieces of internal data structures and eliminate its
  reliance on a specific ordering of trip point objects in the thermal
  core, make thermal core adjustments needed for the ACPI thermal driver
  rework, modify the thermal governor interface so as to use trip
  pointers for representing trip points in it, switch over multiple
  thermal drivers to using void platform driver remove callbacks, add
  support for 2 hardware features to the Intel int340x thermal driver,
  add support for new hardware on ARM platforms, update documentation,
  fix problems, clean up code and update the MAINTAINERS record for
  thermal control.

  Specifics:

   - Untangle the initialization and updates of passive and active trip
     points in the ACPI thermal driver (Rafael Wysocki)

   - Reduce code duplication related to the initialization and updates
     of trip points in the ACPI thermal driver (Rafael Wysocki)

   - Use trip pointers for cooling device binding in the ACPI thermal
     driver (Rafael Wysocki)

   - Simplify critical and hot trips representation in the ACPI thermal
     driver (Rafael Wysocki)

   - Use trip pointers in thermal governors and in the related part of
     the thermal core (Rafael Wysocki)

   - Drop the trips_disabled bitmask that has become redundant from the
     thermal core (Rafael Wysocki)

   - Avoid updating trip points when the thermal zone temperature falls
     into a trip point's hysteresis range (ícolas F. R. A. Prado)

   - Add power floor notifications support to the int340x thermal
     control driver (Srinivas Pandruvada)

   - Rework updating trip points in the int340x thermal driver so that
     it does not access thermal zone internals directly (Rafael
     Wysocki)

   - Use param_get_byte() instead of param_get_int() as the max_idle
     module parameter .get() callback in the Intel powerclamp thermal
     driver to avoid possible out-of-bounds access (David Arcari)

   - Add workload hints support to the int340x thermal driver (Srinivas
     Pandruvada)

   - Add support for Mediatek LVTS MT8192 along with suspend/resume
     routines (Balsam Chihi)

   - Fix probe for THERMAL_V2 in the Mediatek LVTS driver (Markus
     Schneider-Pargmann)

   - Remove duplicate error message from the max76620 driver when
     thermal_of_zone_register() fails (Thierry Reding)

   - Add i.MX7D compatible bindings to fix a warning from dtbs_check for
     the imx6ul platform (Alexander Stein)

   - Add sa8775p compatible to the QCom tsens driver (Priyansh Jain)

   - Fix error check in lvts_debugfs_init() to be against PTR_ERR() in
     the LVTS Mediatek driver (Minjie Du)

   - Remove unused variable in thermal/tools (Kuan-Wei Chiu)

   - Document the imx8dl thermal sensor (Fabio Estevam)

   - Add variable names in callback prototypes to prevent warning from
     checkpatch.pl in the imx8mm driver (Bragatheswaran Manickavel)

   - Add missing unevaluatedProperties on child node schemas for
     tegra124 (Rob Herring)

   - Add mt7988 support to the Mediatek LVTS driver (Frank Wunderlich)"

* tag 'thermal-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (111 commits)
  thermal: ACPI: Include the right header file
  thermal: core: Don't update trip points inside the hysteresis range
  thermal: core: Pass trip pointer to governor throttle callback
  thermal: gov_step_wise: Fold update_passive_instance() into its caller
  thermal: gov_power_allocator: Use trip pointers instead of trip indices
  thermal: gov_fair_share: Rearrange get_trip_level()
  thermal: trip: Define for_each_trip() macro
  thermal: trip: Simplify computing trip indices
  thermal/qcom/tsens: Drop ops_v0_1
  thermal/drivers/mediatek/lvts_thermal: Update calibration data documentation
  thermal/drivers/mediatek/lvts_thermal: Add mt8192 support
  thermal/drivers/mediatek/lvts_thermal: Add suspend and resume
  dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for mt8192
  thermal/drivers/mediatek: Fix probe for THERMAL_V2
  thermal/drivers/max77620: Remove duplicate error message
  dt-bindings: timer: add imx7d compatible
  dt-bindings: net: microchip: Allow nvmem-cell usage
  dt-bindings: imx-thermal: Add #thermal-sensor-cells property
  dt-bindings: thermal: tsens: Add sa8775p compatible
  thermal/drivers/mediatek/lvts_thermal: Fix error check in lvts_debugfs_init()
  ...

The acpi_thermal_unregister_thermal_zone() is paired with
acpi_thermal_register_thermal_zone() so it should mirror it.  It should
clean up all the resources that the register function allocated and
leave the stuff that was allocated elsewhere.

Unfortunately, it doesn't call thermal_zone_device_disable().  Also it
calls kfree(tz->trip_table) when it shouldn't.  That was allocated in
acpi_thermal_add().  Putting the kfree() here leads to a double free
in the acpi_thermal_add() clean up function.

Likewise, the acpi_thermal_remove() should mirror acpi_thermal_add() so
it should have an explicit kfree(tz->trip_table) as well.

Fixes: ec23c1c462de ("ACPI: thermal: Use trip point table to register thermal zones")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>