linux-toradex.git/drivers/ata/Kconfig, branch v2.6.20

Fix Maple PATA IRQ assignment.

2007-01-26T22:27:40+00:00

On the Maple board, the AMD8111 IDE is in legacy mode... except that it
appears on IRQ 20 instead of IRQ 15. For drivers/ide this was handled by
the architecture's "pci_get_legacy_ide_irq()" function, but in libata we
just hard-code the numbers 14 and 15.

This patch provides asm-powerpc/libata-portmap.h which maps the IRQ as
appropriate, having added a pci_dev argument to the
ATA_{PRIM,SECOND}ARY_IRQ macros.

There's probably a better way to do this -- especially if we observe
that the _only_ case in which this seemingly-generic
"pci_get_legacy_ide_irq()" function returns anything other than 14 and
15 for primary and secondary respectively is the case of the AMD8111 on
the Maple board -- couldn't we handle that with a special case in the
pata_amd driver, or perhaps with a PCI quirk for Maple to switch it into
native mode during early boot and assign resources properly?

Signed-off-by: David Woodhouse 
Signed-off-by: Jeff Garzik

[PATCH] pata_optidma: typo in Kconfig

2007-01-06T07:55:28+00:00

Signed-off-by: Alexey Dobriyan 
Acked-by: Alan Cox 
Cc: Jeff Garzik 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] Fix help text for CONFIG_ATA_PIIX

2006-12-16T15:46:21+00:00

> Thanks for clarifying Bill, and sorry Alan. ata_piix does indeed work
> correctly. The help text is a bit confusing:
>
> config ATA_PIIX
>         tristate "Intel PIIX/ICH SATA support"
>         depends on PCI
>         help
>           This option enables support for ICH5/6/7/8 Serial ATA.
>           If PATA support was enabled previously, this enables
>           support for select Intel PIIX/ICH PATA host controllers.

New help text

Signed-off-by: Alan Cox 
Signed-off-by: Jeff Garzik

[libata] ARM: add ixp4xx PATA driver

2006-12-02T03:42:51+00:00

Signed-off-by: Alessandro Zummo 
Signed-off-by: Jeff Garzik

[PATCH] ata: Generic platform_device libata driver

2006-12-02T03:40:28+00:00

needs a changelog

Signed-off-by: Paul Mundt 
Acked-by: Russell King 
Cc: Jeff Garzik 
Cc: Tejun Heo 
Signed-off-by: Andrew Morton 
Signed-off-by: Jeff Garzik

[PATCH] pata_marvell: Marvell 6101/6145 PATA driver

2006-12-02T03:40:27+00:00

This is a legacy mode PATA driver for the 6101/45 and will also drive
the SATA ports 1 & 2 in legacy mode as well if desired. Tested and
confirmed working by users. The chip supports AHCI type behaviour for
SATA and has a more advanced PATA interface as well so this driver will
get it working but not get best performance for now.

Signed-off-by: Alan Cox 
Signed-off-by: Jeff Garzik

[PATCH] libata: Winbond support

2006-12-02T03:40:24+00:00

Winbond 83759A support in non-multichip mode (afaik nobody ever used
multichip mode anyway). The 83759 is not supported by this driver as it
is already handled elsewhere and doens't use the same interfaces.

Signed-off-by: Alan Cox 
Signed-off-by: Jeff Garzik

[PATCH] ATA must depend on BLOCK

2006-10-21T19:10:10+00:00

Fix the following compile error with CONFIG_ATA=y, CONFIG_BLOCK=n:

...
  CC      drivers/ata/libata-scsi.o
/home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ata/libata-scsi.c: In function ‘ata_scsi_dev_config’:
/home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ata/libata-scsi.c:791: warning: implicit declaration of function ‘blk_queue_max_sectors’
/home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ata/libata-scsi.c:799: error: ‘request_queue_t’ undeclared (first use in this function)
/home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ata/libata-scsi.c:799: error: (Each undeclared identifier is reported only once
/home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ata/libata-scsi.c:799: error: for each function it appears in.)
/home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ata/libata-scsi.c:799: error: ‘q’ undeclared (first use in this function)
/home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ata/libata-scsi.c:800: warning: implicit declaration of function ‘blk_queue_max_hw_segments’
/home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ata/libata-scsi.c: In function ‘ata_scsi_slave_config’:
/home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ata/libata-scsi.c:831:
warning: implicit declaration of function ‘blk_queue_max_phys_segments’
make[3]: *** [drivers/ata/libata-scsi.o] Error 1

Bug report by Jesper Juhl.

Signed-off-by: Adrian Bunk 
Cc: Jeff Garzik 
Signed-off-by: Andrew Morton 
Signed-off-by: Jeff Garzik

[PATCH] libata: tighten rules for legacy dependancies

2006-09-26T17:34:27+00:00

The legacy and QDI drivers are ISA/VLB bus [we don't have a VLB define
but ISA will do nicely].

Signed-off-by: Alan Cox 
Signed-off-by: Jeff Garzik

[PATCH] libata won't build on SUN4

2006-09-24T22:55:03+00:00

marked as such...

Signed-off-by: Al Viro 
Signed-off-by: Linus Torvalds