-add compilation flag to treat warning as error

bug 949219

Change-Id: I23c961756ebe7b84ff019995e5c0704693fdf13f
Signed-off-by: Deepak Nibade <dnibade@nvidia.com>
Reviewed-on: http://git-master/r/118016
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Sanjay Singh Rawat <srawat@nvidia.com>
Reviewed-by: Yen Lin <yelin@nvidia.com>
Reviewed-by: Sachin Nikam <snikam@nvidia.com>

Upgrade the Tegra 3 SATA driver to support kernel 3.1.

The driver supports runtime_pm when doing power-gating during idle.

A new CONFIG_TEGRA_SATA_IDLE_POWERGATE is provided to enable/disable
power-gating during idle.

When sata clocks (sata, sata-oob and pll_e clocks) are in the
core_dvfs_table[] table, CONFIG_TEGRA_SATA_IDLE_POWERGATE must not
be enabled.

Currently, sata clocks are in the core_dvfs_table[]. Those clocks
will not be in that table in the future. By then,
CONFIG_TEGRA_SATA_IDLE_POWERGATE can then be enabled.

Change-Id: I15b585713bfd891f8827fd028b21bf3e5c2b80d9
Signed-off-by: Yen Lin <yelin@nvidia.com>
Reviewed-on: http://git-master/r/89614
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Jon Mayo <jmayo@nvidia.com>
Reviewed-by: Yu-Huan Hsu <yhsu@nvidia.com>

Add basic support for pata on iMX. It has been tested only on imx51.
SDMA support will probably be added later so this version supports only
PIO.

v2:
  - enable only when needed IORDY
  - use dev_get_drvdata
v3:
  - add missing clk_put() calls
  - use platform_get_irq()
  - fix resume code to avoid disabling IORDY on resume
v4:
  - Remove EXPERIMENTAL and switch to depends on ARCH_MXC
  - Use devm_kzalloc()
  - make clock a must-have
  - Use only 1 ioremap

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

The Arasan CompactFlash Device Controller has three basic modes of
operation: PC card ATA using I/O mode, PC card ATA using memory mode, PC card
ATA using true IDE modes.

Currently driver supports only True IDE mode.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

Add support for Acard ATP8620 host controller.

Based upon initial version by Jeff Garzik.

Signed-off-by: David Milburn <dmilburn@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Found by this build-error if BMDMA is disabled:

drivers/ata/pata_mpc52xx.c: In function 'mpc52xx_ata_init_one':
drivers/ata/pata_mpc52xx.c:662: error: 'ata_bmdma_interrupt' undeclared (first use in this function)
...

Move the Kconfig entry to the proper location as needed since
9a7780c9acb821fe1c2b6fc53f74cc2556ff5364 (libata-sff: make BMDMA optional)

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Changed <module>-objs to <module>-y in Makefile.

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

This is a scheleton for libata transport class.
All information is read only, exporting information from libata:
- ata_port class: one per ATA port
- ata_link class: one per ATA port or 15 for SATA Port Multiplier
- ata_device class: up to 2 for PATA link, usually one for SATA.

Signed-off-by: Gwendal Grignou <gwendal@google.com>
Reviewed-by: Grant Grundler <grundler@google.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Winbond W83759A controller is fully supported by pata_legacy driver
so remove no longer needed pata_winbond driver.

Leave PATA_WINBOND_VLB config option for compatibility reasons
and teach pata_legacy to preserve the old behavior of pata_winbond
driver.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Conflicts:
	arch/arm/Kconfig
	arch/arm/mm/Kconfig