linux-toradex.git/drivers/ata/libata-core.c, branch v4.9.95

libata: Modify quirks for MX100 to limit NCQ_TRIM quirk to MU01 version

2018-03-28T16:39:21+00:00

commit d418ff56b8f2d2b296daafa8da151fe27689b757 upstream.

When commit 9c7be59fc519af ("libata: Apply NOLPM quirk to Crucial MX100
512GB SSDs") was added it inherited the ATA_HORKAGE_NO_NCQ_TRIM quirk
from the existing "Crucial_CT*MX100*" entry, but that entry sets model_rev
to "MU01", where as the entry adding the NOLPM quirk sets it to NULL.

This means that after this commit we no apply the NO_NCQ_TRIM quirk to
all "Crucial_CT512MX100*" SSDs even if they have the fixed "MU02"
firmware. This commit splits the "Crucial_CT512MX100*" quirk into 2
quirks, one for the "MU01" firmware and one for all other firmware
versions, so that we once again only apply the NO_NCQ_TRIM quirk to the
"MU01" firmware version.

Fixes: 9c7be59fc519af ("libata: Apply NOLPM quirk to ... MX100 512GB SSDs")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede 
Signed-off-by: Tejun Heo 
Signed-off-by: Greg Kroah-Hartman

libata: Make Crucial BX100 500GB LPM quirk apply to all firmware versions

2018-03-28T16:39:21+00:00

commit 3bf7b5d6d017c27e0d3b160aafb35a8e7cfeda1f upstream.

Commit b17e5729a630 ("libata: disable LPM for Crucial BX100 SSD 500GB
drive"), introduced a ATA_HORKAGE_NOLPM quirk for Crucial BX100 500GB SSDs
but limited this to the MU02 firmware version, according to:
http://www.crucial.com/usa/en/support-ssd-firmware

MU02 is the last version, so there are no newer possibly fixed versions
and if the MU02 version has broken LPM then the MU01 almost certainly
also has broken LPM, so this commit changes the quirk to apply to all
firmware versions.

Fixes: b17e5729a630 ("libata: disable LPM for Crucial BX100 SSD 500GB...")
Cc: stable@vger.kernel.org
Cc: Kai-Heng Feng 
Signed-off-by: Hans de Goede 
Signed-off-by: Tejun Heo 
Signed-off-by: Greg Kroah-Hartman

libata: Apply NOLPM quirk to Crucial M500 480 and 960GB SSDs

2018-03-28T16:39:21+00:00

commit 62ac3f7305470e3f52f159de448bc1a771717e88 upstream.

There have been reports of the Crucial M500 480GB model not working
with LPM set to min_power / med_power_with_dipm level.

It has not been tested with medium_power, but that typically has no
measurable power-savings.

Note the reporters Crucial_CT480M500SSD3 has a firmware version of MU03
and there is a MU05 update available, but that update does not mention any
LPM fixes in its changelog, so the quirk matches all firmware versions.

In my experience the LPM problems with (older) Crucial SSDs seem to be
limited to higher capacity versions of the SSDs (different firmware?),
so this commit adds a NOLPM quirk for the 480 and 960GB versions of the
M500, to avoid LPM causing issues with these SSDs.

Cc: stable@vger.kernel.org
Reported-and-tested-by: Martin Steigerwald 
Signed-off-by: Hans de Goede 
Signed-off-by: Tejun Heo 
Signed-off-by: Greg Kroah-Hartman

libata: Enable queued TRIM for Samsung SSD 860

2018-03-28T16:39:20+00:00

commit ca6bfcb2f6d9deab3924bf901e73622a94900473 upstream.

Samsung explicitly states that queued TRIM is supported for Linux with
860 PRO and 860 EVO.

Make the previous blacklist to cover only 840 and 850 series.

Signed-off-by: Park Ju Hyung 
Reviewed-by: Martin K. Petersen 
Signed-off-by: Tejun Heo 
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman

libata: disable LPM for Crucial BX100 SSD 500GB drive

2018-03-28T16:39:20+00:00

commit b17e5729a630d8326a48ec34ef02e6b4464a6aef upstream.

After Laptop Mode Tools starts to use min_power for LPM, a user found
out Crucial BX100 SSD can't get mounted.

Crucial BX100 SSD 500GB drive don't work well with min_power. This also
happens to med_power_with_dipm.

So let's disable LPM for Crucial BX100 SSD 500GB drive.

BugLink: https://bugs.launchpad.net/bugs/1726930
Signed-off-by: Kai-Heng Feng 
Signed-off-by: Tejun Heo 
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman

libata: Apply NOLPM quirk to Crucial MX100 512GB SSDs

2018-03-28T16:39:20+00:00

commit 9c7be59fc519af9081c46c48f06f2b8fadf55ad8 upstream.

Various people have reported the Crucial MX100 512GB model not working
with LPM set to min_power. I've now received a report that it also does
not work with the new med_power_with_dipm level.

It does work with medium_power, but that has no measurable power-savings
and given the amount of people being bitten by the other levels not
working, this commit just disables LPM altogether.

Note all reporters of this have either the 512GB model (max capacity), or
are not specifying their SSD's size. So for now this quirk assumes this is
a problem with the 512GB model only.

Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=89261
Buglink: https://github.com/linrunner/TLP/issues/84
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede 
Signed-off-by: Tejun Heo 
Signed-off-by: Greg Kroah-Hartman

libata: remove WARN() for DMA or PIO command without data

2018-03-28T16:39:20+00:00

commit 9173e5e80729c8434b8d27531527c5245f4a5594 upstream.

syzkaller hit a WARN() in ata_qc_issue() when writing to /dev/sg0.  This
happened because it issued a READ_6 command with no data buffer.

Just remove the WARN(), as it doesn't appear indicate a kernel bug.  The
expected behavior is to fail the command, which the code does.

Here's a reproducer that works in QEMU when /dev/sg0 refers to a disk of
the default type ("82371SB PIIX3 IDE"):

    #include 
    #include 

    int main()
    {
            char buf[42] = { [36] = 0x8 /* READ_6 */ };

            write(open("/dev/sg0", O_RDWR), buf, sizeof(buf));
    }

Fixes: f92a26365a72 ("libata: change ATA_QCFLAG_DMAMAP semantics")
Reported-by: syzbot+f7b556d1766502a69d85071d2ff08bd87be53d0f@syzkaller.appspotmail.com
Cc:  # v2.6.25+
Signed-off-by: Eric Biggers 
Signed-off-by: Tejun Heo 
Signed-off-by: Greg Kroah-Hartman

libata: apply MAX_SEC_1024 to all LITEON EP1 series devices

2018-01-23T18:57:08+00:00

commit db5ff909798ef0099004ad50a0ff5fde92426fd1 upstream.

LITEON EP1 has the same timeout issues as CX1 series devices.

Revert max_sectors to the value of 1024.

Fixes: e0edc8c54646 ("libata: apply MAX_SEC_1024 to all CX1-JB*-HP devices")
Signed-off-by: Xinyu Lin 
Signed-off-by: Tejun Heo 
Signed-off-by: Greg Kroah-Hartman

libata: Fix ATA request sense

2017-02-09T07:08:27+00:00

commit 2dae99558e86894e9e5dbf097477baaa5eb70134 upstream.

For an ATA device supporting the sense data reporting feature set, a
failed command will trigger the execution of ata_eh_request_sense if
the result task file of the failed command has the ATA_SENSE bit set
(sense data available bit). ata_eh_request_sense executes the REQUEST
SENSE DATA EXT command to retrieve the sense data of the failed
command. On success of REQUEST SENSE DATA EXT, the ATA_SENSE bit will
NOT be set (the command succeeded) but ata_eh_request_sense
nevertheless tests the availability of sense data by testing that bit
presence in the result tf of the REQUEST SENSE DATA EXT command.  This
leads us to falsely assume that request sense data failed and to the
warning message:

atax.xx: request sense failed stat 50 emask 0

Upon success of REQUEST SENSE DATA EXT, set the ATA_SENSE bit in the
result task file command so that sense data can be returned by
ata_eh_request_sense.

Signed-off-by: Damien Le Moal 
Signed-off-by: Tejun Heo 
Signed-off-by: Greg Kroah-Hartman

libata: apply MAX_SEC_1024 to all CX1-JB*-HP devices

2017-02-09T07:08:27+00:00

commit e0edc8c546463f268d41d064d855bcff994c52fa upstream.

Marko reports that CX1-JB512-HP shows the same timeout issues as
CX1-JB256-HP.  Let's apply MAX_SEC_128 to all devices in the series.

Signed-off-by: Tejun Heo 
Reported-by: Marko Koski-Vähälä 
Signed-off-by: Greg Kroah-Hartman