linux-toradex.git/drivers/ata/libata-pmp.c, branch v3.12.30

ata: enable quirk from jmicron JMB350 for JMB394

2014-03-05T16:13:46+00:00

commit efb9e0f4f43780f0ae0c6428d66bd03e805c7539 upstream.

Without the patch the kernel generates the following error.

 ata11.15: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
 ata11.15: Port Multiplier vendor mismatch '0x197b' != '0x123'
 ata11.15: PMP revalidation failed (errno=-19)
 ata11.15: failed to recover PMP after 5 tries, giving up

This patch helps to bypass this error and the device becomes
functional.

Signed-off-by: Denis V. Lunev 
Signed-off-by: Tejun Heo 
Cc: 
Signed-off-by: Jiri Slaby

libata: apply behavioral quirks to sil3826 PMP

2013-08-19T13:38:21+00:00

Fixing support for the Silicon Image 3826 port multiplier, by applying
to it the same quirks applied to the Silicon Image 3726.  Specifically
fixes the repeated timeout/reset process which previously afflicted
the 3726, as described from line 290.  Slightly based on notes from:

https://bugzilla.redhat.com/show_bug.cgi?id=890237

Signed-off-by: Terry Suereth 
Signed-off-by: Tejun Heo 
Cc: stable@vger.kernel.org

libata: skip SRST for all SIMG [34]7x port-multipliers

2013-06-11T07:14:34+00:00

For some reason, a lot of port-multipliers have issues with softreset.
SIMG [34]7x series port-multipliers have been quite erratic in this
regard.  I recall that it was better with some firmware revisions and
the current list of quirks worked fine for a while.  I think it got
worse with later firmwares or maybe my test coverage wasn't good
enough.  Anyways, HPA is reporting that his 3726 setup suffers SRST
failures and then the PMP gets confused and fails to probe the last
port.

The hope was that we try to stick to the standard as much as possible
and soonish the PMPs and their firmwares will improve in quality, so
the quirk list was kept to minimum.  Well, it seems like that's never
gonna happen.

Let's set NO_SRST for all [34]7x PMPs so that whatever remaining
userbase of the device suffer the least.  Maybe we should do the same
for 57xx's but unfortunately I don't have any device left to test and
I'm not even sure 57xx's have ever been made widely available, so
let's leave those alone for now.

Signed-off-by: Tejun Heo 
Reported-by: "H. Peter Anvin" 
Cc: stable@vger.kernel.org

libata: migrate ACPI code over to new bindings

2012-06-29T15:38:11+00:00

Now that we have the ability to directly glue the ACPI namespace to the
driver model in libata, we don't need the custom code to handle the same
thing. Remove it and migrate the functions over to the new code.

Signed-off-by: Matthew Garrett 
Signed-off-by: Holger Macht 
Signed-off-by: Lin Ming 
Signed-off-by: Jeff Garzik

[libata] Issue SRST to Sil3726 PMP

2011-11-09T06:38:00+00:00

Reenable sending SRST to devices connected behind a Sil3726 PMP.
This allow staggered spinups and handles drives that spins up slowly.

While the drives spin up, the PMP will not accept SRST.
Most controller reissues the reset until the drive is ready, while
some [Sil3124] returns an error.
In ata_eh_error, wait 10s before reset the ATA port and try again.

Signed-off-by: Gwendal Grignou 
Acked-by: Tejun Heo 
Signed-off-by: Jeff Garzik

ide/ata: Add export.h for EXPORT_SYMBOL/THIS_MODULE where needed

2011-10-31T23:31:37+00:00

They were getting this implicitly by an include of module.h
from device.h -- but we are going to clean that up and break
that include chain, so include export.h explicitly now.

Signed-off-by: Paul Gortmaker

ata: Convert ata__printk(KERN_ to ata__

2011-07-23T21:57:36+00:00

Saves text by removing nearly duplicated text format strings by
creating ata__printk functions and printf extension %pV.

ata defconfig size shrinks ~5% (~8KB), allyesconfig ~2.5% (~13KB)

Format string duplication comes from:

 #define ata_link_printk(link, lv, fmt, args...) do { \
       if (sata_pmp_attached((link)->ap) || (link)->ap->slave_link)    \
               printk("%sata%u.%02u: "fmt, lv, (link)->ap->print_id,   \
                      (link)->pmp , ##args); \
       else \
               printk("%sata%u: "fmt, lv, (link)->ap->print_id , ##args); \
       } while(0)

Coalesce long formats.

$ size drivers/ata/built-in.*
   text	   data	    bss	    dec	    hex	filename
 544969	  73893	 116584	 735446	  b38d6	drivers/ata/built-in.allyesconfig.ata.o
 558429	  73893	 117864	 750186	  b726a	drivers/ata/built-in.allyesconfig.dev_level.o
 141328	  14689	   4220	 160237	  271ed	drivers/ata/built-in.defconfig.ata.o
 149567	  14689	   4220	 168476	  2921c	drivers/ata/built-in.defconfig.dev_level.o

Signed-off-by: Joe Perches 
Signed-off-by: Jeff Garzik

libata-pmp: add support for Thermaltake BlackX Duet esata drive dock

2011-05-20T00:48:59+00:00

Some errors still show up, but the dock works, both drives can be
accessed at the same time

The chip maker and designation is unknown - possibly jmicron JMB350?

Signed-off-by: Pavel Herrmann 
Acked-by: Tejun Heo 
Signed-off-by: Jeff Garzik

libata: implement LPM support for port multipliers

2010-10-22T00:21:04+00:00

Port multipliers can do DIPM on fan-out links fine.  Implement support
for it.  Tested w/ SIMG 57xx and marvell PMPs.  Both the host and
fan-out links enter power save modes nicely.

SIMG 37xx and 47xx report link offline on SStatus causing EH to detach
the devices.  Blacklisted.

Signed-off-by: Tejun Heo 
Signed-off-by: Jeff Garzik

[libata] Add ATA transport class

2010-10-22T00:21:03+00:00

This is a scheleton for libata transport class.
All information is read only, exporting information from libata:
- ata_port class: one per ATA port
- ata_link class: one per ATA port or 15 for SATA Port Multiplier
- ata_device class: up to 2 for PATA link, usually one for SATA.

Signed-off-by: Gwendal Grignou 
Reviewed-by: Grant Grundler 
Signed-off-by: Jeff Garzik