linux-toradex.git/drivers/ata/libata-scsi.c, branch v4.6-rc5

libata: fix unbalanced spin_lock_irqsave/spin_unlock_irq() in ata_scsi_park_show()

2016-02-18T16:53:17+00:00

ata_scsi_park_show() was pairing spin_lock_irqsave() with
spin_unlock_irq().  As the function is always called with irq enabled,
it didn't actually break anything.  Use spin_lock_irq() instead.

Signed-off-by: Tejun Heo 
Reported-by: Dan Carpenter 
Cc: Elias Oltmanns

libata: fix HDIO_GET_32BIT ioctl

2016-02-11T15:07:18+00:00

As reported by Soohoon Lee, the HDIO_GET_32BIT ioctl does not
work correctly in compat mode with libata.

I have investigated the issue further and found multiple problems
that all appeared with the same commit that originally introduced
HDIO_GET_32BIT handling in libata back in linux-2.6.8 and presumably
also linux-2.4, as the code uses "copy_to_user(arg, &val, 1)" to copy
a 'long' variable containing either 0 or 1 to user space.

The problems with this are:

* On big-endian machines, this will always write a zero because it
  stores the wrong byte into user space.

* In compat mode, the upper three bytes of the variable are updated
  by the compat_hdio_ioctl() function, but they now contain
  uninitialized stack data.

* The hdparm tool calling this ioctl uses a 'static long' variable
  to store the result. This means at least the upper bytes are
  initialized to zero, but calling another ioctl like HDIO_GET_MULTCOUNT
  would fill them with data that remains stale when the low byte
  is overwritten. Fortunately libata doesn't implement any of the
  affected ioctl commands, so this would only happen when we query
  both an IDE and an ATA device in the same command such as
  "hdparm -N -c /dev/hda /dev/sda"

* The libata code for unknown reasons started using ATA_IOC_GET_IO32
  and ATA_IOC_SET_IO32 as aliases for HDIO_GET_32BIT and HDIO_SET_32BIT,
  while the ioctl commands that were added later use the normal
  HDIO_* names. This is harmless but rather confusing.

This addresses all four issues by changing the code to use put_user()
on an 'unsigned long' variable in HDIO_GET_32BIT, like the IDE subsystem
does, and by clarifying the names of the ioctl commands.

Signed-off-by: Arnd Bergmann 
Reported-by: Soohoon Lee 
Tested-by: Soohoon Lee 
Cc: stable@vger.kernel.org
Signed-off-by: Tejun Heo

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2015-11-14T04:35:54+00:00

Pull final round of SCSI updates from James Bottomley:
 "Sorry for the delay in this patch which was mostly caused by getting
  the merger of the mpt2/mpt3sas driver, which was seen as an essential
  item of maintenance work to do before the drivers diverge too much.
  Unfortunately, this caused a compile failure (detected by linux-next),
  which then had to be fixed up and incubated.

  In addition to the mpt2/3sas rework, there are updates from pm80xx,
  lpfc, bnx2fc, hpsa, ipr, aacraid, megaraid_sas, storvsc and ufs plus
  an assortment of changes including some year 2038 issues, a fix for a
  remove before detach issue in some drivers and a couple of other minor
  issues"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (141 commits)
  mpt3sas: fix inline markers on non inline function declarations
  sd: Clear PS bit before Mode Select.
  ibmvscsi: set max_lun to 32
  ibmvscsi: display default value for max_id, max_lun and max_channel.
  mptfusion: don't allow negative bytes in kbuf_alloc_2_sgl()
  scsi: pmcraid: replace struct timeval with ktime_get_real_seconds()
  mvumi: 64bit value for seconds_since1970
  be2iscsi: Fix bogus WARN_ON length check
  scsi_scan: don't dump trace when scsi_prep_async_scan() is called twice
  mpt3sas: Bump mpt3sas driver version to 09.102.00.00
  mpt3sas: Single driver module which supports both SAS 2.0 & SAS 3.0 HBAs
  mpt2sas, mpt3sas: Update the driver versions
  mpt3sas: setpci reset kernel oops fix
  mpt3sas: Added OEM Gen2 PnP ID branding names
  mpt3sas: Refcount fw_events and fix unsafe list usage
  mpt3sas: Refcount sas_device objects and fix unsafe list usage
  mpt3sas: sysfs attribute to report Backup Rail Monitor Status
  mpt3sas: Ported WarpDrive product SSS6200 support
  mpt3sas: fix for driver fails EEH, recovery from injected pci bus error
  mpt3sas: Manage MSI-X vectors according to HBA device type
  ...

scsi: use host wide tags by default

2015-11-10T01:11:57+00:00

This patch changes the !blk-mq path to the same defaults as the blk-mq
I/O path by always enabling block tagging, and always using host wide
tags.  We've had blk-mq available for a few releases so bugs with
this mode should have been ironed out, and this ensures we get better
coverage of over tagging setup over different configs.

Signed-off-by: Christoph Hellwig 
Acked-by: Jens Axboe 
Reviewed-by: Hannes Reinecke 
Signed-off-by: James Bottomley

libata: enable LBA flag in taskfile for ata_scsi_pass_thru()

2015-10-27T07:48:01+00:00

Enable LBA in taskfile flags for ata_scsi_pass_thru()

Signed-off-by: Vinayak Kale 
Signed-off-by: Tejun Heo

libata: add support for NCQ commands for SG interface

2015-10-27T06:09:01+00:00

This patch is needed to make NCQ commands with FPDMA protocol value
(eg READ/WRITE FPDMA) work over SCSI Generic (SG) interface.

Signed-off-by: Vinayak Kale 
Signed-off-by: Tejun Heo

libata: only call ->done once all per-tag ressources are released

2015-10-12T17:23:13+00:00

When calling ->done before releasing resources we could run into a
race where the SCSI midlayer sends another command and races with
the resources beeing manipulated.  For libata this can't currently
happen as synchronization happens at a higher level, but I'd still
like to fix it to future proof libata and to avoid copy & paste
into SCSI drivers where this pattern has led to reproducible crashes.

Signed-off-by: Christoph Hellwig 
Signed-off-by: Tejun Heo

libata: cleanup ata_scsi_qc_complete

2015-10-04T17:37:58+00:00

Remove an incorrect comment and untangle an if statement in
ata_scsi_qc_complete.

Signed-off-by: Christoph Hellwig 
Signed-off-by: Tejun Heo

ata: ahci: find eSATA ports and flag them as removable

2015-09-30T21:37:55+00:00

If the AHCI ports' HPCP or ESP bits are set, the port
should be considered external (e.g. eSATA) and is marked
as removable.  Userspace tools like udisks then treat it
like an usb drive.

With this patch applied, when I plug a drive into the esata port,
KDE pops up a window asking what to do with the drives(s), just
like it does for any random USB stick.

Removability is indicated to the upper layers by way of the
SCSI RMB bit, as I haven't found another way to signal
userspace to treat a sata disk like any usb stick.

Signed-off-by: Manuel Lauss 
Signed-off-by: Tejun Heo

Revert "libata: Implement NCQ autosense"

2015-08-03T16:01:54+00:00

This reverts commit 42b966fbf35da9c87f08d98f9b8978edf9e717cf.

As implemented, ACS-4 sense reporting for ATA devices bypasses error
diagnosis and handling in libata degrading EH behavior significantly.
Revert the related changes for now.

Signed-off-by: Tejun Heo 
Cc: Hannes Reinecke 
Cc: stable@vger.kernel.org #v4.1+