linux-toradex.git/drivers/ata/pata_artop.c, branch v3.3.1

pata_artop: add Power Management support

2011-10-14T17:32:54+00:00

Fixes IDE -> libata regression.

There shouldn't be any problems with it as corresponding IDE's host
driver (aec62xx) has been supporting PCI Power Management since
Oct 10 2008 (commit feb22b7f "ide: add proper PCI PM support (v2)")
and IDE PM since Jun 14 2003 (patch v2.5.73 "ide: Power Management").

Signed-off-by: Bartlomiej Zolnierkiewicz 
Signed-off-by: Jeff Garzik

pata_artop: unify ->prereset methods

2011-10-14T17:06:56+00:00

* Unify ->prereset methods for ATP850 and ATP86x[R] chipsets.

* Fix ->prereset documentation while at it.

Signed-off-by: Bartlomiej Zolnierkiewicz 
Signed-off-by: Jeff Garzik

ata: Add and use ata_print_version_once

2011-07-23T21:57:36+00:00

Use a single mechanism to show driver version.
Reduces text a tiny bit too.

Remove uses of static int printed_version
Add and use ata_print_version(const struct device *, const char *ver)
and ata_print_version_once.

$ size drivers/ata/built-in.*
   text	   data	    bss	    dec	    hex	filename
 544969	  73893	 116584	 735446	  b38d6	drivers/ata/built-in.allyesconfig.ata.o
 543870	  73893	 116592	 734355	  b34ad	drivers/ata/built-in.allyesconfig.print_once.o
 141328	  14689	   4220	 160237	  271ed	drivers/ata/built-in.defconfig.ata.o
 141212	  14689	   4220	 160121	  27179	drivers/ata/built-in.defconfig.print_once.o

Signed-off-by: Joe Perches 
Signed-off-by: Jeff Garzik

pata_artop: Fix device ID parity check

2010-09-09T18:19:18+00:00

x % 1 always evaluates to 0, which clearly isn't the intent. The
author probably had "% 2" or "& 1" in mind, and mispelled it.

Signed-off-by: Jean Delvare 
Cc: Jeff Garzik 
Cc: Alan Cox 
Signed-off-by: Jeff Garzik

libata-sff: separate out BMDMA init

2010-05-25T23:40:30+00:00

Separate out ata_pci_bmdma_prepare_host() and ata_pci_bmdma_init_one()
from their SFF counterparts.  SFF ones no longer try to initialize
BMDMA or set PCI master.

Signed-off-by: Tejun Heo 
Signed-off-by: Jeff Garzik

libata: Pass host flags into the pci helper

2010-03-01T19:58:46+00:00

This allows parallel scan and the like to be set without having to stop
using the existing full helper functions. This patch merely adds the argument
and fixes up the callers. It doesn't undo the special cases already in the
tree or add any new parallel callers.

Signed-off-by: Alan Cox 
Signed-off-by: Jeff Garzik

pata_artop: Serializing support

2009-03-25T02:45:05+00:00

Enable both ports on the 6210 and serialize them

Signed-off-by: Alan Cox 
Signed-off-by: Jeff Garzik

[libata] convert drivers to use ata.h mode mask defines

2009-03-25T02:13:27+00:00

No functional changes in this patch.

Signed-off-by: Erik Inge Bolsø 
Signed-off-by: Jeff Garzik

ata: Switch all my stuff to a common address

2008-10-28T03:54:50+00:00

Signed-off-by: Jeff Garzik

libata: rename SFF functions

2008-04-17T19:44:21+00:00

SFF functions have confusing names.  Some have sff prefix, some have
bmdma, some std, some pci and some none.  Unify the naming by...

* SFF functions which are common to both BMDMA and non-BMDMA are
  prefixed with ata_sff_.

* SFF functions which are specific to BMDMA are prefixed with
  ata_bmdma_.

* SFF functions which are specific to PCI but apply to both BMDMA and
  non-BMDMA are prefixed with ata_pci_sff_.

* SFF functions which are specific to PCI and BMDMA are prefixed with
  ata_pci_bmdma_.

* Drop generic prefixes from LLD specific routines.  For example,
  bfin_std_dev_select -> bfin_dev_select.

The following renames are noteworthy.

  ata_qc_issue_prot() -> ata_sff_qc_issue()
  ata_pci_default_filter() -> ata_bmdma_mode_filter()
  ata_dev_try_classify() -> ata_sff_dev_classify()

This rename is in preparation of separating SFF support out of libata
core layer.  This patch strictly renames functions and doesn't
introduce any behavior difference.

Signed-off-by: Tejun Heo