linux-toradex.git/drivers/ata/pata_hpt366.c, branch v4.1.25

ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers

2014-05-10T02:37:49+00:00

This patch fixes host drivers to use CONFIG_PM_SLEEP instead of CONFIG_PM
where applicable.  Benefits of this change:

* unused code is not being compiled in for CONFIG_PM=y, CONFIG_PM_SLEEP=n
  and CONFIG_PM_RUNTIME=y configurations

* easier transition to use struct dev_pm_ops and SIMPLE_DEV_PM_OPS() in
  the future

* more consistent code (there are host drivers which are using the correct
  CONFIG_PM_SLEEP checks already)

The patch leaves the core libata code and ->port_[suspend,resume] support
in sata_[inic162x,nv,sil24].c alone for now.

Signed-off-by: Bartlomiej Zolnierkiewicz 
Signed-off-by: Tejun Heo

ata: delete non-required instances of include

2014-02-13T21:40:56+00:00

None of these files are actually using any __init type directives
and hence don't need to include .  Most are just a
left over from __devinit and __cpuinit removal, or simply due to
code getting copied from one driver to the next.

Cc: linux-ide@vger.kernel.org
Signed-off-by: Paul Gortmaker 
Signed-off-by: Tejun Heo

ata: use pci_get_drvdata()

2013-06-03T05:22:03+00:00

Use the wrapper function for getting the driver data using pci_dev
instead of using dev_get_drvdata() with &pdev->dev, so we can directly
pass a struct pci_dev.  This is a purely cosmetic change.

Signed-off-by: Jingoo Han 
Signed-off-by: Tejun Heo

ata: use module_pci_driver

2012-07-25T19:12:11+00:00

This patch converts the drivers in drivers/ata/* to use module_pci_driver()
macro which makes the code smaller and a bit simpler.

Signed-off-by: Axel Lin 
Cc: Alan Cox 
Cc: Jeff Garzik 
Cc: Mikael Pettersson 
Cc: Mark Lord 
Cc: Jeremy Higdon 
Cc: Benjamin Herrenschmidt 
Signed-off-by: Jeff Garzik

pata_hpt366: add hpt36x_find_mode() helper

2011-10-14T17:07:18+00:00

Factor out code for finding the register programming information
from hpt366_set_mode() to hpt36x_find_mode().

This makes pata_hpt366 driver more similar to pata_{37x,3x2n} ones.

Signed-off-by: Bartlomiej Zolnierkiewicz 
Signed-off-by: Jeff Garzik

ata: pata: Convert pr_*(DRV_NAME ...) to pr_fmt/pr_

2011-03-14T06:56:31+00:00

Commit 40d69ba029c8d5de51aaeb5358999266c482d00a
("pata_hpt{37x|3x2n}: use pr_*(DRV_NAME ...) instead of printk(KERN_* ...)")
used pr_.

Add #define pr_fmt and remove DRV_NAME.
Increment driver version numbers.

Signed-off-by: Joe Perches 
Signed-off-by: Jeff Garzik

pata_hpt{366|37x}: use pr_warning(...) instead of printk(KERN_WARNING ...)

2011-01-28T08:07:04+00:00

... in hpt_dma_blacklisted().

Signed-off-by: Sergei Shtylyov 
Signed-off-by: Jeff Garzik

pata_hpt366: coding style cleanup

2011-01-08T03:33:29+00:00

Fix 2 errors and 11 warnings given by checkpatch.pl:

- *switch* and *case* not on the same indentation level;

- no space between *switch* and open parenthesis;

- drive blacklist arrays not being *const*;

- spaces before tabs;

- lines over 80 characters.

In addition to these changes, also add new line after variable definition in
hpt36x_init_chipset()...

Signed-off-by: Sergei Shtylyov 
Signed-off-by: Jeff Garzik

libata-sff: separate out BMDMA init

2010-05-25T23:40:30+00:00

Separate out ata_pci_bmdma_prepare_host() and ata_pci_bmdma_init_one()
from their SFF counterparts.  SFF ones no longer try to initialize
BMDMA or set PCI master.

Signed-off-by: Tejun Heo 
Signed-off-by: Jeff Garzik

libata-sff: clean up BMDMA initialization

2010-05-19T17:32:19+00:00

When BMDMA initialization failed or BMDMA was not available for
whatever reason, bmdma_addr was left at zero and used as an indication
that BMDMA shouldn't be used.  This leads to the following problems.

p1. For BMDMA drivers which don't use traditional BMDMA register,
    ata_bmdma_mode_filter() incorrectly inhibits DMA modes.  Those
    drivers either have to inherit from ata_sff_port_ops or clear
    ->mode_filter explicitly.

p2. non-BMDMA drivers call into BMDMA PRD table allocation.  It
    doesn't actually allocate PRD table if bmdma_addr is not
    initialized but is still confusing.

p3. For BMDMA drivers which don't use traditional BMDMA register, some
    methods might not be invoked as expected (e.g. bmdma_stop from
    ata_sff_post_internal_cmd()).

p4. SFF drivers w/ custom DMA interface implement noop BMDMA ops
    worrying libata core might call into one of them.

These problems are caused by the muddy line between SFF and BMDMA and
the assumption that all BMDMA controllers initialize bmdma_addr.

This patch fixes p1 and p2 by removing the bmdma_addr assumption and
moving prd allocation to BMDMA port start.  Later patches will fix the
remaining issues.

This patch improves BMDMA initialization such that

* When BMDMA register initialization fails, falls back to PIO instead
  of failing.  ata_pci_bmdma_init() never fails now.

* When ata_pci_bmdma_init() falls back to PIO, it clears
  ap->mwdma_mask and udma_mask instead of depending on
  ata_bmdma_mode_filter().  This makes ata_bmdma_mode_filter()
  unnecessary thus resolving p1.

* ata_port_start() which actually is BMDMA specific is moved to
  ata_bmdma_port_start().  ata_port_start() and ata_sff_port_start()
  are killed.

* ata_sff_port_start32() is moved and renamed to
  ata_bmdma_port_start32().

Drivers which no longer call into PRD table allocation are...

  pdc_adma, sata_inic162x, sata_qstor, sata_sx4, pata_cmd640 and all
  drivers which inherit from ata_sff_port_ops.

pata_icside sets ->port_start to ATA_OP_NULL as it doesn't need PRD
but is a BMDMA controller and doesn't have custom port_start like
other such controllers.

Note that with the previous patch which makes all and only BMDMA
drivers inherit from ata_bmdma_port_ops, this change doesn't break
drivers which need PRD table.

Signed-off-by: Tejun Heo 
Signed-off-by: Jeff Garzik