linux-toradex.git/drivers/ata/pata_serverworks.c, branch v3.12.2

ata: use pci_get_drvdata()

2013-06-03T05:22:03+00:00

Use the wrapper function for getting the driver data using pci_dev
instead of using dev_get_drvdata() with &pdev->dev, so we can directly
pass a struct pci_dev.  This is a purely cosmetic change.

Signed-off-by: Jingoo Han 
Signed-off-by: Tejun Heo

ata: use module_pci_driver

2012-07-25T19:12:11+00:00

This patch converts the drivers in drivers/ata/* to use module_pci_driver()
macro which makes the code smaller and a bit simpler.

Signed-off-by: Axel Lin 
Cc: Alan Cox 
Cc: Jeff Garzik 
Cc: Mikael Pettersson 
Cc: Mark Lord 
Cc: Jeremy Higdon 
Cc: Benjamin Herrenschmidt 
Signed-off-by: Jeff Garzik

pata_serverworks: add serverworks_fixup()

2011-10-14T17:16:35+00:00

Factor out common code from serverworks_[re]init_one() to
serverworks_fixup().

Signed-off-by: Bartlomiej Zolnierkiewicz 
Signed-off-by: Jeff Garzik

pata_serverworks: cleanup cable detection

2011-10-14T17:16:29+00:00

Merge identical cable routines for Dell and Sun systems into
common oem_cable() one.

Acked-by: Alan Cox 
Signed-off-by: Bartlomiej Zolnierkiewicz 
Signed-off-by: Jeff Garzik

pata_serverworks: use standard cable detection methods

2011-10-14T17:15:54+00:00

Signed-off-by: Bartlomiej Zolnierkiewicz 
Signed-off-by: Jeff Garzik

libata-sff: separate out BMDMA init

2010-05-25T23:40:30+00:00

Separate out ata_pci_bmdma_prepare_host() and ata_pci_bmdma_init_one()
from their SFF counterparts.  SFF ones no longer try to initialize
BMDMA or set PCI master.

Signed-off-by: Tejun Heo 
Signed-off-by: Jeff Garzik

libata-sff: clean up BMDMA initialization

2010-05-19T17:32:19+00:00

When BMDMA initialization failed or BMDMA was not available for
whatever reason, bmdma_addr was left at zero and used as an indication
that BMDMA shouldn't be used.  This leads to the following problems.

p1. For BMDMA drivers which don't use traditional BMDMA register,
    ata_bmdma_mode_filter() incorrectly inhibits DMA modes.  Those
    drivers either have to inherit from ata_sff_port_ops or clear
    ->mode_filter explicitly.

p2. non-BMDMA drivers call into BMDMA PRD table allocation.  It
    doesn't actually allocate PRD table if bmdma_addr is not
    initialized but is still confusing.

p3. For BMDMA drivers which don't use traditional BMDMA register, some
    methods might not be invoked as expected (e.g. bmdma_stop from
    ata_sff_post_internal_cmd()).

p4. SFF drivers w/ custom DMA interface implement noop BMDMA ops
    worrying libata core might call into one of them.

These problems are caused by the muddy line between SFF and BMDMA and
the assumption that all BMDMA controllers initialize bmdma_addr.

This patch fixes p1 and p2 by removing the bmdma_addr assumption and
moving prd allocation to BMDMA port start.  Later patches will fix the
remaining issues.

This patch improves BMDMA initialization such that

* When BMDMA register initialization fails, falls back to PIO instead
  of failing.  ata_pci_bmdma_init() never fails now.

* When ata_pci_bmdma_init() falls back to PIO, it clears
  ap->mwdma_mask and udma_mask instead of depending on
  ata_bmdma_mode_filter().  This makes ata_bmdma_mode_filter()
  unnecessary thus resolving p1.

* ata_port_start() which actually is BMDMA specific is moved to
  ata_bmdma_port_start().  ata_port_start() and ata_sff_port_start()
  are killed.

* ata_sff_port_start32() is moved and renamed to
  ata_bmdma_port_start32().

Drivers which no longer call into PRD table allocation are...

  pdc_adma, sata_inic162x, sata_qstor, sata_sx4, pata_cmd640 and all
  drivers which inherit from ata_sff_port_ops.

pata_icside sets ->port_start to ATA_OP_NULL as it doesn't need PRD
but is a BMDMA controller and doesn't have custom port_start like
other such controllers.

Note that with the previous patch which makes all and only BMDMA
drivers inherit from ata_bmdma_port_ops, this change doesn't break
drivers which need PRD table.

Signed-off-by: Tejun Heo 
Signed-off-by: Jeff Garzik

libata: Pass host flags into the pci helper

2010-03-01T19:58:46+00:00

This allows parallel scan and the like to be set without having to stop
using the existing full helper functions. This patch merely adds the argument
and fixes up the callers. It doesn't undo the special cases already in the
tree or add any new parallel callers.

Signed-off-by: Alan Cox 
Signed-off-by: Jeff Garzik

pata_serverworks: fix error message

2010-03-01T19:58:45+00:00

Signed-off-by: Bartlomiej Zolnierkiewicz 
Signed-off-by: Jeff Garzik

pata_serverworks: fix PIO setup for the second channel

2010-03-01T19:58:45+00:00

Signed-off-by: Bartlomiej Zolnierkiewicz 
Signed-off-by: Jeff Garzik