linux-toradex.git/drivers/ata/pdc_adma.c, branch v2.6.23.14

[libata] Bump driver versions

2007-08-31T08:54:06+00:00

Bump the versions for drivers that were modified, but had not already
had a version number bump.

Signed-off-by: Jeff Garzik

[libata] Use ATA_UDMAx standard masks when filling driver's udma_mask info

2007-07-09T16:17:35+00:00

The ATA_UDMAx masks are self-documenting, and far better than manually
writing in the hex mask.

Note that pata_it8213 mask differed from the comment.  Added a FIXME there.

Signed-off-by: Jeff Garzik

[libata] pdc_adma: Reorder initializers with a couple structs

2007-07-09T16:17:32+00:00

Make it easier to verify which struct initializers are present, by
presenting them in the order in which they are defined in the API
header.

Signed-off-by: Jeff Garzik

libata: bump versions

2007-05-22T00:26:38+00:00

Signed-off-by: Jeff Garzik

libata: convert the remaining PATA drivers to new init model

2007-04-28T18:16:06+00:00

Convert pdc_adma, pata_cs5520, pata_isapnp, pata_ixp4xx_cf,
pata_legacy, pata_mpc52xx, pata_mpiix, pata_pcmcia, pata_pdc2027x,
pata_platform, pata_qdi, pata_scc and pata_winbond to new init model.

* init_one()'s now follow more consistent init order

* cs5520 now registers one host with two ports, not two hosts.  If any
  of the two ports are disabled, it's made dummy as other drivers do.

Tested pdc_adma and pata_legacy.  Both are as broken as before.  The
rest are compile tested only.

Signed-off-by: Tejun Heo 
Signed-off-by: Jeff Garzik

[libata] bump versions

2007-02-26T11:04:24+00:00

Bump versions based on changes submitted during 2.6.21 merge window.

Signed-off-by: Jeff Garzik

libata: s/ap->id/ap->print_id/g

2007-02-21T09:58:20+00:00

ata_port has two different id fields - id and port_no.  id is
system-wide 1-based unique id for the port while port_no is 0-based
host-wide port number.  The former is primarily used to identify the
ATA port to the user in printk messages while the latter is used in
various places in libata core and LLDs to index the port inside the
host.

The two fields feel quite similar and sometimes ap->id is used in
place of ap->port_no, which is very difficult to spot.  This patch
renames ap->id to ap->print_id to reduce the possibility of such bugs.

Some printk messages are adjusted such that id string (ata%u[.%u])
isn't printed twice and/or to use ata_*_printk() instead of hardcoded
id format.

Signed-off-by: Tejun Heo 
Signed-off-by: Jeff Garzik

[PATCH] remove many unneeded #includes of sched.h

2007-02-14T16:09:54+00:00

After Al Viro (finally) succeeded in removing the sched.h #include in module.h
recently, it makes sense again to remove other superfluous sched.h includes.
There are quite a lot of files which include it but don't actually need
anything defined in there.  Presumably these includes were once needed for
macros that used to live in sched.h, but moved to other header files in the
course of cleaning it up.

To ease the pain, this time I did not fiddle with any header files and only
removed #includes from .c-files, which tend to cause less trouble.

Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
configs in arch/arm/configs on arm.  I also checked that no new warnings were
introduced by the patch (actually, some warnings are removed that were emitted
by unnecessarily included header files).

Signed-off-by: Tim Schmielau 
Acked-by: Russell King 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

libata: add another IRQ calls (libata drivers)

2007-02-09T22:39:38+00:00

This patch is against each libata driver.

Two IRQ calls are added in ata_port_operations.
- irq_on() is used to enable interrupts.
- irq_ack() is used to acknowledge a device interrupt.

In most drivers, ata_irq_on() and ata_irq_ack() are used for
irq_on and irq_ack respectively.

In some drivers (ex: ahci, sata_sil24) which cannot use them
as is, ata_dummy_irq_on() and ata_dummy_irq_ack() are used.

Signed-off-by: Kou Ishizaki 
Signed-off-by: Akira Iguchi 
Signed-off-by: Jeff Garzik

libata: convert to iomap

2007-02-09T22:39:38+00:00

Convert libata core layer and LLDs to use iomap.

* managed iomap is used.  Pointer to pcim_iomap_table() is cached at
  host->iomap and used through out LLDs.  This basically replaces
  host->mmio_base.

* if possible, pcim_iomap_regions() is used

Most iomap operation conversions are taken from Jeff Garzik
's iomap branch.

Signed-off-by: Tejun Heo 
Signed-off-by: Jeff Garzik