linux-toradex.git/drivers/ata, branch v2.6.22.9

libata: add ATI SB700 device IDs to AHCI driver

2007-08-22T23:23:26+00:00

The SATA controller device ID is different according to
the onchip SATA type set in the system BIOS:
Device                              Device ID
SATA in IDE mode             0x4390
SATA in AHCI mode           0x4391
SATA in non-raid5 driver     0x4392
SATA in raid5 driver           0x4393

Although the device ID is different, they use the same AHCI driver
.The attached file is the patch for adding these device
IDs for ATI SB700.

Signed-off-by: su henry 
Signed-off-by: Jeff Garzik 
Cc: Chuck Ebbert 
Signed-off-by: Greg Kroah-Hartman

pata_atiixp: add SB700 PCI ID

2007-08-15T16:25:10+00:00

[libata] pata_atiixp: add SB700 PCI ID

From AMD.

Signed-off-by: Jeff Garzik 
Cc: Chuck Ebbert 
Signed-off-by: Greg Kroah-Hartman

ata_piix: update map 10b for ich8m

2007-08-15T16:25:09+00:00

Fix map entry 10b for ich8.  It's [P0 P2 IDE IDE] like ich6 / ich6m.

Signed-off-by: Tejun Heo 
Acked-by: Kristen Carlson Accardi 
Cc: Jeff Garzik 
Signed-off-by: Greg Kroah-Hartman

libata: add FUJITSU MHV2080BH to NCQ blacklist

2007-08-09T21:27:42+00:00

Please warmly welcome the first member from FUJITSU to the prestigious
NCQ spurious completion club.

This is reported by Serge Van Thillo in bugzilla bug 8730.

  http://bugzilla.kernel.org/show_bug.cgi?id=8730

Signed-off-by: Tejun Heo 
Cc: Serge van Thillo 
Cc: Jeff Garzik 
Signed-off-by: Greg Kroah-Hartman

Fix reported task file values in sense data

2007-08-09T21:27:30+00:00

ata_tf_read was setting HOB bit when lba48 command was submitted, but
was not clearing it before reading "normal" data.  As it is only place
which sets HOB bit in control register, and register reads should not
be affected by other bits, let's just clear it when we are done with
reading upper bytes so non-48bit commands do not have to touch ctl
at all.

pata_scc suffered from same problem...

Signed-off-by: Petr Vandrovec 
Signed-off-by: Jeff Garzik 
Signed-off-by: Greg Kroah-Hartman

Add a PCI ID for santa rosa's PATA controller.

2007-08-09T21:27:26+00:00

This is commit c1e6f28cc5de37dcd113b9668a185c0b9334ba8a which is
merged during 23-rc1 window.  Considering the popularity of these
chips, I think including it in -stable release would be good idea.

Signed-off-by: Christian Lamparter 
Signed-off-by: Jeff Garzik 
Signed-off-by: Greg Kroah-Hartman

pata_pcmcia: Switch to ata_sff_port_start

2007-07-03T15:31:06+00:00

PCMCIA doesn't use DMA and as this driver is used on many platforms we
don't want it to fail on those that define the DMA alloc API as a NULL
return

Signed-off-by: Alan Cox 
Signed-off-by: Jeff Garzik

pata_pdc202xx_old: Correct cable detect logic

2007-07-03T14:11:12+00:00

We got it backwards and now the other detects are fixed it shows up

Signed-off-by: Alan Cox 
Signed-off-by: Jeff Garzik

ata_generic: Check the right register for the DMA enabled flags

2007-07-03T14:09:29+00:00

Mirrors change in IT821X

Signed-off-by: Alan Cox 
Signed-off-by: Jeff Garzik

pata_ali: fix UDMA settings

2007-07-03T14:06:45+00:00

This patch was found to fix some of the problems with the
pata_ali driver.

https://bugzilla.redhat.com/bugzilla/attachment.cgi?id=156482

Signed-off-by: Jeff Garzik