linux-toradex.git/drivers/ata, branch v3.10.56

ata_piix: Add Device IDs for Intel 9 Series PCH

2014-10-05T21:54:13+00:00

commit 6cad1376954e591c3c41500c4e586e183e7ffe6d upstream.

This patch adds the IDE mode SATA Device IDs for the Intel 9 Series PCH.

Signed-off-by: James Ralston 
Signed-off-by: Tejun Heo 
Signed-off-by: Greg Kroah-Hartman

ahci: add pcid for Marvel 0x9182 controller

2014-10-05T21:54:07+00:00

commit c5edfff9db6f4d2c35c802acb4abe0df178becee upstream.

Keystone K2E EVM uses Marvel 0x9182 controller. This requires support
for the ID in the ahci driver.

Signed-off-by: Murali Karicheri 
Signed-off-by: Tejun Heo 
Cc: Santosh Shilimkar 
Signed-off-by: Greg Kroah-Hartman

ahci: Add Device IDs for Intel 9 Series PCH

2014-10-05T21:54:07+00:00

commit 1b071a0947dbce5c184c12262e02540fbc493457 upstream.

This patch adds the AHCI mode SATA Device IDs for the Intel 9 Series PCH.

Signed-off-by: James Ralston 
Signed-off-by: Tejun Heo 
Signed-off-by: Greg Kroah-Hartman

pata_scc: propagate return value of scc_wait_after_reset

2014-10-05T21:54:07+00:00

commit 4dc7c76cd500fa78c64adfda4b070b870a2b993c upstream.

scc_bus_softreset not necessarily should return zero.
Propagate the error code.

Signed-off-by: Arjun Sreedharan 
Signed-off-by: Tejun Heo 
Signed-off-by: Greg Kroah-Hartman

ahci: add support for the Promise FastTrak TX8660 SATA HBA (ahci mode)

2014-07-31T19:53:49+00:00

commit b32bfc06aefab61acc872dec3222624e6cd867ed upstream.

Add support of the Promise FastTrak TX8660 SATA HBA in ahci mode by
registering the board in the ahci_pci_tbl[].

Note: this HBA also provide a hardware RAID mode when activated in
BIOS but specific drivers from the manufacturer are required in this
case.

Signed-off-by: Romain Degez 
Tested-by: Romain Degez 
Signed-off-by: Tejun Heo 
Signed-off-by: Greg Kroah-Hartman

libata: introduce ata_host->n_tags to avoid oops on SAS controllers

2014-07-31T19:53:49+00:00

commit 1a112d10f03e83fb3a2fdc4c9165865dec8a3ca6 upstream.

1871ee134b73 ("libata: support the ata host which implements a queue
depth less than 32") directly used ata_port->scsi_host->can_queue from
ata_qc_new() to determine the number of tags supported by the host;
unfortunately, SAS controllers doing SATA don't initialize ->scsi_host
leading to the following oops.

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000058
 IP: [] ata_qc_new_init+0x188/0x1b0
 PGD 0
 Oops: 0002 [#1] SMP
 Modules linked in: isci libsas scsi_transport_sas mgag200 drm_kms_helper ttm
 CPU: 1 PID: 518 Comm: udevd Not tainted 3.16.0-rc6+ #62
 Hardware name: Intel Corporation S2600CO/S2600CO, BIOS SE5C600.86B.02.02.0002.122320131210 12/23/2013
 task: ffff880c1a00b280 ti: ffff88061a000000 task.ti: ffff88061a000000
 RIP: 0010:[]  [] ata_qc_new_init+0x188/0x1b0
 RSP: 0018:ffff88061a003ae8  EFLAGS: 00010012
 RAX: 0000000000000001 RBX: ffff88000241ca80 RCX: 00000000000000fa
 RDX: 0000000000000020 RSI: 0000000000000020 RDI: ffff8806194aa298
 RBP: ffff88061a003ae8 R08: ffff8806194a8000 R09: 0000000000000000
 R10: 0000000000000000 R11: ffff88000241ca80 R12: ffff88061ad58200
 R13: ffff8806194aa298 R14: ffffffff814e67a0 R15: ffff8806194a8000
 FS:  00007f3ad7fe3840(0000) GS:ffff880627620000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000058 CR3: 000000061a118000 CR4: 00000000001407e0
 Stack:
  ffff88061a003b20 ffffffff814e96e1 ffff88000241ca80 ffff88061ad58200
  ffff8800b6bf6000 ffff880c1c988000 ffff880619903850 ffff88061a003b68
  ffffffffa0056ce1 ffff88061a003b48 0000000013d6e6f8 ffff88000241ca80
 Call Trace:
  [] ata_sas_queuecmd+0xa1/0x430
  [] sas_queuecommand+0x191/0x220 [libsas]
  [] scsi_dispatch_cmd+0x10e/0x300 [] scsi_request_fn+0x2f5/0x550
  [] __blk_run_queue+0x33/0x40
  [] queue_unplugged+0x2a/0x90
  [] blk_flush_plug_list+0x1b4/0x210
  [] blk_finish_plug+0x14/0x50
  [] __do_page_cache_readahead+0x198/0x1f0
  [] force_page_cache_readahead+0x31/0x50
  [] page_cache_sync_readahead+0x3e/0x50
  [] generic_file_read_iter+0x496/0x5a0
  [] blkdev_read_iter+0x37/0x40
  [] new_sync_read+0x7e/0xb0
  [] vfs_read+0x94/0x170
  [] SyS_read+0x46/0xb0
  [] ? SyS_lseek+0x91/0xb0
  [] system_call_fastpath+0x16/0x1b
 Code: 00 00 00 88 50 29 83 7f 08 01 19 d2 83 e2 f0 83 ea 50 88 50 34 c6 81 1d 02 00 00 40 c6 81 17 02 00 00 00 5d c3 66 0f 1f 44 00 00 <89> 14 25 58 00 00 00

Fix it by introducing ata_host->n_tags which is initialized to
ATA_MAX_QUEUE - 1 in ata_host_init() for SAS controllers and set to
scsi_host_template->can_queue in ata_host_register() for !SAS ones.
As SAS hosts are never registered, this will give them the same
ATA_MAX_QUEUE - 1 as before.  Note that we can't use
scsi_host->can_queue directly for SAS hosts anyway as they can go
higher than the libata maximum.

Signed-off-by: Tejun Heo 
Reported-by: Mike Qiu 
Reported-by: Jesse Brandeburg 
Reported-by: Peter Hurley 
Reported-by: Peter Zijlstra 
Tested-by: Alexey Kardashevskiy 
Fixes: 1871ee134b73 ("libata: support the ata host which implements a queue depth less than 32")
Cc: Kevin Hao 
Cc: Dan Williams 
Signed-off-by: Greg Kroah-Hartman

libata: support the ata host which implements a queue depth less than 32

2014-07-31T19:53:48+00:00

commit 1871ee134b73fb4cadab75752a7152ed2813c751 upstream.

The sata on fsl mpc8315e is broken after the commit 8a4aeec8d2d6
("libata/ahci: accommodate tag ordered controllers"). The reason is
that the ata controller on this SoC only implement a queue depth of
16. When issuing the commands in tag order, all the commands in tag
16 ~ 31 are mapped to tag 0 unconditionally and then causes the sata
malfunction. It makes no senses to use a 32 queue in software while
the hardware has less queue depth. So consider the queue depth
implemented by the hardware when requesting a command tag.

Fixes: 8a4aeec8d2d6 ("libata/ahci: accommodate tag ordered controllers")
Signed-off-by: Kevin Hao 
Acked-by: Dan Williams 
Signed-off-by: Tejun Heo 
Signed-off-by: Greg Kroah-Hartman

ahci: add PCI ID for Marvell 88SE91A0 SATA Controller

2014-06-16T20:42:54+00:00

commit 754a292fe6b08196cb135c03b404444e17de520a upstream.

Add support for Marvell Technology Group Ltd. 88SE91A0 SATA 6Gb/s
Controller by adding its PCI ID.

Signed-off-by: Andreas Schrägle 
Signed-off-by: Tejun Heo 
Signed-off-by: Greg Kroah-Hartman

ahci: Add Device ID for HighPoint RocketRaid 642L

2014-06-16T20:42:54+00:00

commit d251836508fb26cd1a22b41381739835ee23728d upstream.

This device normally comes with a proprietary driver, using a web GUI
to configure RAID:
 http://www.highpoint-tech.com/USA_new/series_rr600-download.htm
But thankfully it also works out of the box with the AHCI driver,
being just a Marvell 88SE9235.

Devices 640L, 644L, 644LS should also be supported but not tested here.

Signed-off-by: Jérôme Carretero 
Signed-off-by: Tejun Heo 
Signed-off-by: Greg Kroah-Hartman

libata: clean up ZPODD when a port is detached

2014-06-07T20:25:39+00:00

commit a6f9bf4d2f965b862b95213303d154e02957eed8 upstream.

When a ZPODD device is unbound via sysfs, the ACPI notify handler
is not removed. This causes panics as observed in Bug #74601. The
panic only happens when the wake happens from outside the kernel
(i.e. inserting a media or pressing a button). Add a loop to
ata_port_detach which loops through the port's devices and checks
if zpodd is enabled, if so call zpodd_exit.

Reviewed-by: Aaron Lu 
Signed-off-by: Levente Kurusa 
Signed-off-by: Tejun Heo 
Signed-off-by: Greg Kroah-Hartman