linux-toradex.git/drivers/ata, branch v3.10.78

sata_dwc_460ex: fix resource leak on error path

2015-01-30T01:40:56+00:00

commit 4aaa71873ddb9faf4b0c4826579e2f6d18ff9ab4 upstream.

DMA mapped IO should be unmapped on the error path in probe() and
unconditionally on remove().

Fixes: 62936009f35a ([libata] Add 460EX on-chip SATA driver, sata_dwc_460ex)
Signed-off-by: Andy Shevchenko 
Signed-off-by: Tejun Heo 
Signed-off-by: Greg Kroah-Hartman

libata: prevent HSM state change race between ISR and PIO

2015-01-30T01:40:55+00:00

commit ce7514526742c0898b837d4395f515b79dfb5a12 upstream.

It is possible for ata_sff_flush_pio_task() to set ap->hsm_task_state to
HSM_ST_IDLE in between the time __ata_sff_port_intr() checks for HSM_ST_IDLE
and before it calls ata_sff_hsm_move() causing ata_sff_hsm_move() to BUG().

This problem is hard to reproduce making this patch hard to verify, but this
fix will prevent the race.

I have not been able to reproduce the problem, but here is a crash dump from
a 2.6.32 kernel.

On examining the ata port's state, its hsm_task_state field has a value of HSM_ST_IDLE:

crash> struct ata_port.hsm_task_state ffff881c1121c000
  hsm_task_state = 0

Normally, this should not be possible as ata_sff_hsm_move() was called from ata_sff_host_intr(),
which checks hsm_task_state and won't call ata_sff_hsm_move() if it has a HSM_ST_IDLE value.

PID: 11053  TASK: ffff8816e846cae0  CPU: 0   COMMAND: "sshd"
 #0 [ffff88008ba03960] machine_kexec at ffffffff81038f3b
 #1 [ffff88008ba039c0] crash_kexec at ffffffff810c5d92
 #2 [ffff88008ba03a90] oops_end at ffffffff8152b510
 #3 [ffff88008ba03ac0] die at ffffffff81010e0b
 #4 [ffff88008ba03af0] do_trap at ffffffff8152ad74
 #5 [ffff88008ba03b50] do_invalid_op at ffffffff8100cf95
 #6 [ffff88008ba03bf0] invalid_op at ffffffff8100bf9b
    [exception RIP: ata_sff_hsm_move+317]
    RIP: ffffffff813a77ad  RSP: ffff88008ba03ca0  RFLAGS: 00010097
    RAX: 0000000000000000  RBX: ffff881c1121dc60  RCX: 0000000000000000
    RDX: ffff881c1121dd10  RSI: ffff881c1121dc60  RDI: ffff881c1121c000
    RBP: ffff88008ba03d00   R8: 0000000000000000   R9: 000000000000002e
    R10: 000000000001003f  R11: 000000000000009b  R12: ffff881c1121c000
    R13: 0000000000000000  R14: 0000000000000050  R15: ffff881c1121dd78
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 #7 [ffff88008ba03d08] ata_sff_host_intr at ffffffff813a7fbd
 #8 [ffff88008ba03d38] ata_sff_interrupt at ffffffff813a821e
 #9 [ffff88008ba03d78] handle_IRQ_event at ffffffff810e6ec0

sata_fsl: fix error handling of irq_of_parse_and_map

2014-12-16T17:09:42+00:00

commit aad0b624129709c94c2e19e583b6053520353fa8 upstream.

irq_of_parse_and_map() returns 0 on error (the result is unsigned int),
so testing for negative result never works.

Signed-off-by: Dmitry Torokhov 
Signed-off-by: Tejun Heo 
Signed-off-by: Greg Kroah-Hartman

ahci: disable MSI on SAMSUNG 0xa800 SSD

2014-12-16T17:09:42+00:00

commit 2b21ef0aae65f22f5ba86b13c4588f6f0c2dbefb upstream.

Just like 0x1600 which got blacklisted by 66a7cbc303f4 ("ahci: disable
MSI instead of NCQ on Samsung pci-e SSDs on macbooks"), 0xa800 chokes
on NCQ commands if MSI is enabled.  Disable MSI.

Signed-off-by: Tejun Heo 
Reported-by: Dominik Mierzejewski 
Link: https://bugzilla.kernel.org/show_bug.cgi?id=89171
Signed-off-by: Greg Kroah-Hartman

AHCI: Add DeviceIDs for Sunrise Point-LP SATA controller

2014-12-16T17:09:42+00:00

commit 249cd0a187ed4ef1d0af7f74362cc2791ec5581b upstream.

This patch adds DeviceIDs for Sunrise Point-LP.

Signed-off-by: Devin Ryles 
Signed-off-by: Tejun Heo 
Signed-off-by: Greg Kroah-Hartman

ahci: disable MSI instead of NCQ on Samsung pci-e SSDs on macbooks

2014-11-21T17:22:52+00:00

commit 66a7cbc303f4d28f201529b06061944d51ab530c upstream.

Samsung pci-e SSDs on macbooks failed miserably on NCQ commands, so
67809f85d31e ("ahci: disable NCQ on Samsung pci-e SSDs on macbooks")
disabled NCQ on them.  It turns out that NCQ is fine as long as MSI is
not used, so let's turn off MSI and leave NCQ on.

Signed-off-by: Tejun Heo 
Link: https://bugzilla.kernel.org/show_bug.cgi?id=60731
Tested-by: 
Tested-by: Imre Kaloz 
Fixes: 67809f85d31e ("ahci: disable NCQ on Samsung pci-e SSDs on macbooks")
Signed-off-by: Greg Kroah-Hartman

ahci: Add Device IDs for Intel Sunrise Point PCH

2014-11-21T17:22:52+00:00

commit 690000b930456a98663567d35dd5c54b688d1e3f upstream.

This patch adds the AHCI-mode SATA Device IDs for the Intel Sunrise Point PCH.

Signed-off-by: James Ralston 
Signed-off-by: Tejun Heo 
Signed-off-by: Greg Kroah-Hartman

libata-sff: Fix controllers with no ctl port

2014-11-14T16:47:53+00:00

commit 6d8ca28fa688a9354bc9fbc935bdaeb3651b6677 upstream.

Currently, ata_sff_softreset is skipped for controllers with no ctl port.
But that also skips ata_sff_dev_classify required for device detection.
This means that libata is currently broken on controllers with no ctl port.

No device connected:
[    1.872480] pata_isapnp 01:01.02: activated
[    1.889823] scsi2 : pata_isapnp
[    1.890109] ata3: PATA max PIO0 cmd 0x1e8 ctl 0x0 irq 11
[    6.888110] ata3.01: qc timeout (cmd 0xec)
[    6.888179] ata3.01: failed to IDENTIFY (I/O error, err_mask=0x5)
[   16.888085] ata3.01: qc timeout (cmd 0xec)
[   16.888147] ata3.01: failed to IDENTIFY (I/O error, err_mask=0x5)
[   46.888086] ata3.01: qc timeout (cmd 0xec)
[   46.888148] ata3.01: failed to IDENTIFY (I/O error, err_mask=0x5)
[   51.888100] ata3.00: qc timeout (cmd 0xec)
[   51.888160] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[   61.888079] ata3.00: qc timeout (cmd 0xec)
[   61.888141] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[   91.888089] ata3.00: qc timeout (cmd 0xec)
[   91.888152] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x5)

ATAPI device connected:
[    1.882061] pata_isapnp 01:01.02: activated
[    1.893430] scsi2 : pata_isapnp
[    1.893719] ata3: PATA max PIO0 cmd 0x1e8 ctl 0x0 irq 11
[    6.892107] ata3.01: qc timeout (cmd 0xec)
[    6.892171] ata3.01: failed to IDENTIFY (I/O error, err_mask=0x5)
[   16.892079] ata3.01: qc timeout (cmd 0xec)
[   16.892138] ata3.01: failed to IDENTIFY (I/O error, err_mask=0x5)
[   46.892079] ata3.01: qc timeout (cmd 0xec)
[   46.892138] ata3.01: failed to IDENTIFY (I/O error, err_mask=0x5)
[   46.908586] ata3.00: ATAPI: ACER CD-767E/O, V1.5X, max PIO2, CDB intr
[   46.924570] ata3.00: configured for PIO0 (device error ignored)
[   46.926295] scsi 2:0:0:0: CD-ROM            ACER     CD-767E/O        1.5X PQ: 0 ANSI: 5
[   46.984519] sr0: scsi3-mmc drive: 6x/6x xa/form2 tray
[   46.984592] cdrom: Uniform CD-ROM driver Revision: 3.20

So don't skip ata_sff_softreset, just skip the reset part of ata_bus_softreset
if the ctl port is not available.

This makes IDE port on ES968 behave correctly:

No device connected:
[    4.670888] pata_isapnp 01:01.02: activated
[    4.673207] scsi host2: pata_isapnp
[    4.673675] ata3: PATA max PIO0 cmd 0x1e8 ctl 0x0 irq 11
[    7.081840] Adding 2541652k swap on /dev/sda2.  Priority:-1 extents:1 across:2541652k

ATAPI device connected:
[    4.704362] pata_isapnp 01:01.02: activated
[    4.706620] scsi host2: pata_isapnp
[    4.706877] ata3: PATA max PIO0 cmd 0x1e8 ctl 0x0 irq 11
[    4.872782] ata3.00: ATAPI: ACER CD-767E/O, V1.5X, max PIO2, CDB intr
[    4.888673] ata3.00: configured for PIO0 (device error ignored)
[    4.893984] scsi 2:0:0:0: CD-ROM            ACER     CD-767E/O        1.5X PQ: 0 ANSI: 5
[    7.015578] Adding 2541652k swap on /dev/sda2.  Priority:-1 extents:1 across:2541652k

Signed-off-by: Ondrej Zary 
Signed-off-by: Tejun Heo 
Signed-off-by: Greg Kroah-Hartman

pata_serverworks: disable 64-KB DMA transfers on Broadcom OSB4 IDE Controller

2014-11-14T16:47:53+00:00

commit 37017ac6849e772e67dd187ba2fbd056c4afa533 upstream.

The Broadcom OSB4 IDE Controller (vendor and device IDs: 1166:0211)
does not support 64-KB DMA transfers.
Whenever a 64-KB DMA transfer is attempted,
the transfer fails and messages similar to the following
are written to the console log:

   [ 2431.851125] sr 0:0:0:0: [sr0] Unhandled sense code
   [ 2431.851139] sr 0:0:0:0: [sr0]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
   [ 2431.851152] sr 0:0:0:0: [sr0]  Sense Key : Hardware Error [current]
   [ 2431.851166] sr 0:0:0:0: [sr0]  Add. Sense: Logical unit communication time-out
   [ 2431.851182] sr 0:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 76 f4 00 00 40 00
   [ 2431.851210] end_request: I/O error, dev sr0, sector 121808

When the libata and pata_serverworks modules
are recompiled with ATA_DEBUG and ATA_VERBOSE_DEBUG defined in libata.h,
the 64-KB transfer size in the scatter-gather list can be seen
in the console log:

   [ 2664.897267] sr 9:0:0:0: [sr0] Send:
   [ 2664.897274] 0xf63d85e0
   [ 2664.897283] sr 9:0:0:0: [sr0] CDB:
   [ 2664.897288] Read(10): 28 00 00 00 7f b4 00 00 40 00
   [ 2664.897319] buffer = 0xf6d6fbc0, bufflen = 131072, queuecommand 0xf81b7700
   [ 2664.897331] ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 00 00 7f b4 00 00 40
   [ 2664.897338] ata_scsi_translate: ENTER
   [ 2664.897345] ata_sg_setup: ENTER, ata1
   [ 2664.897356] ata_sg_setup: 3 sg elements mapped
   [ 2664.897364] ata_bmdma_fill_sg: PRD[0] = (0x66FD2000, 0xE000)
   [ 2664.897371] ata_bmdma_fill_sg: PRD[1] = (0x65000000, 0x10000)
   ------------------------------------------------------> =======
   [ 2664.897378] ata_bmdma_fill_sg: PRD[2] = (0x66A10000, 0x2000)
   [ 2664.897386] ata1: ata_dev_select: ENTER, device 0, wait 1
   [ 2664.897422] ata_sff_tf_load: feat 0x1 nsect 0x0 lba 0x0 0x0 0xFC
   [ 2664.897428] ata_sff_tf_load: device 0xA0
   [ 2664.897448] ata_sff_exec_command: ata1: cmd 0xA0
   [ 2664.897457] ata_scsi_translate: EXIT
   [ 2664.897462] leaving scsi_dispatch_cmnd()
   [ 2664.897497] Doing sr request, dev = sr0, block = 0
   [ 2664.897507] sr0 : reading 64/256 512 byte blocks.
   [ 2664.897553] ata_sff_hsm_move: ata1: protocol 7 task_state 1 (dev_stat 0x58)
   [ 2664.897560] atapi_send_cdb: send cdb
   [ 2666.910058] ata_bmdma_port_intr: ata1: host_stat 0x64
   [ 2666.910079] __ata_sff_port_intr: ata1: protocol 7 task_state 3
   [ 2666.910093] ata_sff_hsm_move: ata1: protocol 7 task_state 3 (dev_stat 0x51)
   [ 2666.910101] ata_sff_hsm_move: ata1: protocol 7 task_state 4 (dev_stat 0x51)
   [ 2666.910129] sr 9:0:0:0: [sr0] Done:
   [ 2666.910136] 0xf63d85e0 TIMEOUT

lspci shows that the driver used for the Broadcom OSB4 IDE Controller is
pata_serverworks:

   00:0f.1 IDE interface: Broadcom OSB4 IDE Controller (prog-if 8e [Master SecP SecO PriP])
           Flags: bus master, medium devsel, latency 64
           [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
           [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
           I/O ports at 0170 [size=8]
           I/O ports at 0374 [size=4]
           I/O ports at 1440 [size=16]
           Kernel driver in use: pata_serverworks

The pata_serverworks driver supports five distinct device IDs,
one being the OSB4 and the other four belonging to the CSB series.
The CSB series appears to support 64-KB DMA transfers,
as tests on a machine with an SAI2 motherboard
containing a Broadcom CSB5 IDE Controller (vendor and device IDs: 1166:0212)
showed no problems with 64-KB DMA transfers.

This problem was first discovered when attempting to install openSUSE
from a DVD on a machine with an STL2 motherboard.
Using the pata_serverworks module,
older releases of openSUSE will not install at all due to the timeouts.
Releases of openSUSE prior to 11.3 can be installed by disabling
the pata_serverworks module using the brokenmodules boot parameter,
which causes the serverworks module to be used instead.
Recent releases of openSUSE (12.2 and later) include better error recovery and
will install, though very slowly.
On all openSUSE releases, the problem can be recreated
on a machine containing a Broadcom OSB4 IDE Controller
by mounting an install DVD and running a command similar to the following:

   find /mnt -type f -print | xargs cat > /dev/null

The patch below corrects the problem.
Similar to the other ATA drivers that do not support 64-KB DMA transfers,
the patch changes the ata_port_operations qc_prep vector to point to a routine
that breaks any 64-KB segment into two 32-KB segments and
changes the scsi_host_template sg_tablesize element to reduce by half
the number of scatter/gather elements allowed.
These two changes affect only the OSB4.

Signed-off-by: Scott Carter 
Signed-off-by: Tejun Heo 
Signed-off-by: Greg Kroah-Hartman

ata_piix: Add Device IDs for Intel 9 Series PCH

2014-10-05T21:54:13+00:00

commit 6cad1376954e591c3c41500c4e586e183e7ffe6d upstream.

This patch adds the IDE mode SATA Device IDs for the Intel 9 Series PCH.

Signed-off-by: James Ralston 
Signed-off-by: Tejun Heo 
Signed-off-by: Greg Kroah-Hartman