linux-toradex.git/drivers/ata, branch v3.4.55 Linux kernel for Apalis and Colibri modules ata_piix: IDE-mode SATA patch for Intel Coleto Creek DeviceIDs 2013-07-28T23:25:40+00:00 Seth Heasley seth.heasley@intel.com 2013-06-19T23:25:37+00:00 1b83171a139d8e054d42cef26430369a8b508ec2 commit c7e8695bfa0611b39493a9dfe8bab9f63f9809bd upstream. This patch adds the IDE-mode SATA DeviceIDs for the Intel Coleto Creek PCH. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c7e8695bfa0611b39493a9dfe8bab9f63f9809bd upstream.

This patch adds the IDE-mode SATA DeviceIDs for the Intel Coleto Creek PCH.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
libata: skip SRST for all SIMG [34]7x port-multipliers 2013-07-28T23:25:40+00:00 Tejun Heo tj@kernel.org 2013-06-11T07:11:36+00:00 ad45d1568c16cb7bb66594c431df5a607a14a29c commit 7a87718d92760fc688628ad6a430643dafa16f1f upstream. For some reason, a lot of port-multipliers have issues with softreset. SIMG [34]7x series port-multipliers have been quite erratic in this regard. I recall that it was better with some firmware revisions and the current list of quirks worked fine for a while. I think it got worse with later firmwares or maybe my test coverage wasn't good enough. Anyways, HPA is reporting that his 3726 setup suffers SRST failures and then the PMP gets confused and fails to probe the last port. The hope was that we try to stick to the standard as much as possible and soonish the PMPs and their firmwares will improve in quality, so the quirk list was kept to minimum. Well, it seems like that's never gonna happen. Let's set NO_SRST for all [34]7x PMPs so that whatever remaining userbase of the device suffer the least. Maybe we should do the same for 57xx's but unfortunately I don't have any device left to test and I'm not even sure 57xx's have ever been made widely available, so let's leave those alone for now. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 7a87718d92760fc688628ad6a430643dafa16f1f upstream.

For some reason, a lot of port-multipliers have issues with softreset.
SIMG [34]7x series port-multipliers have been quite erratic in this
regard.  I recall that it was better with some firmware revisions and
the current list of quirks worked fine for a while.  I think it got
worse with later firmwares or maybe my test coverage wasn't good
enough.  Anyways, HPA is reporting that his 3726 setup suffers SRST
failures and then the PMP gets confused and fails to probe the last
port.

The hope was that we try to stick to the standard as much as possible
and soonish the PMPs and their firmwares will improve in quality, so
the quirk list was kept to minimum.  Well, it seems like that's never
gonna happen.

Let's set NO_SRST for all [34]7x PMPs so that whatever remaining
userbase of the device suffer the least.  Maybe we should do the same
for 57xx's but unfortunately I don't have any device left to test and
I'm not even sure 57xx's have ever been made widely available, so
let's leave those alone for now.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ahci: remove pmp link online check in FBS EH 2013-07-22T01:19:01+00:00 Shane Huang shane.huang@amd.com 2013-06-08T08:00:16+00:00 9d57dc4b0be6fe82b22dc310724a79a728b48147 commit 912b9ac683b112615d5605686f1dc086402ce9f7 upstream. ata_link_online() check in ahci_error_intr() is unnecessary, it should be removed otherwise may lead to lockup with FBS enabled PMP. http://marc.info/?l=linux-ide&m=137050421603272&w=2 Reported-by: Yu Liu <liuyu.ac@gmail.com> Signed-off-by: Shane Huang <shane.huang@amd.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 912b9ac683b112615d5605686f1dc086402ce9f7 upstream.

ata_link_online() check in ahci_error_intr() is unnecessary, it should
be removed otherwise may lead to lockup with FBS enabled PMP.
http://marc.info/?l=linux-ide&m=137050421603272&w=2

Reported-by: Yu Liu <liuyu.ac@gmail.com>
Signed-off-by: Shane Huang <shane.huang@amd.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ahci: Add AMD CZ SATA device ID 2013-07-22T01:19:01+00:00 Shane Huang shane.huang@amd.com 2013-06-03T10:24:10+00:00 722804f129921e1d8c134b1bb7a594de395e3210 commit fafe5c3d82a470d73de53e6b08eb4e28d974d895 upstream. To add AMD CZ SATA controller device ID of IDE mode. [bhelgaas: drop pci_ids.h update] Signed-off-by: Shane Huang <shane.huang@amd.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit fafe5c3d82a470d73de53e6b08eb4e28d974d895 upstream.

To add AMD CZ SATA controller device ID of IDE mode.

[bhelgaas: drop pci_ids.h update]
Signed-off-by: Shane Huang <shane.huang@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
libata: make ata_exec_internal_sg honor DMADIR 2013-06-07T19:49:33+00:00 Vincent Pelletier plr.vincent@gmail.com 2013-05-18T16:44:04+00:00 9771fcbbb0c3f53d87329cddbe1c75e9f5634026 commit e771451c0a831d96a7c14b0ca8a8ec671d98567b upstream. libata honors DMADIR for regular commands, but not for internal commands used (among other) during device initialisation. This makes SATA-host-to-PATA-device bridges based on Silicon Image SiL3611 (such as "Abit Serillel 2") end up disabled when used with an ATAPI device after a few tries. Log output of the bridge being hot-plugged with an ATAPI drive: [ 9631.212901] ata1: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen [ 9631.212913] ata1: irq_stat 0x00000040, connection status changed [ 9631.212923] ata1: SError: { CommWake 10B8B DevExch } [ 9631.212939] ata1: hard resetting link [ 9632.104962] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 9632.106393] ata1.00: ATAPI: PIONEER DVD-RW DVR-115, 1.06, max UDMA/33 [ 9632.106407] ata1.00: applying bridge limits [ 9632.108151] ata1.00: configured for UDMA/33 [ 9637.105303] ata1.00: qc timeout (cmd 0xa0) [ 9637.105324] ata1.00: failed to clear UNIT ATTENTION (err_mask=0x5) [ 9637.105335] ata1: hard resetting link [ 9638.044599] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 9638.047878] ata1.00: configured for UDMA/33 [ 9643.044933] ata1.00: qc timeout (cmd 0xa0) [ 9643.044953] ata1.00: failed to clear UNIT ATTENTION (err_mask=0x5) [ 9643.044963] ata1: limiting SATA link speed to 1.5 Gbps [ 9643.044971] ata1.00: limiting speed to UDMA/33:PIO3 [ 9643.044979] ata1: hard resetting link [ 9643.984225] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 9643.987471] ata1.00: configured for UDMA/33 [ 9648.984591] ata1.00: qc timeout (cmd 0xa0) [ 9648.984612] ata1.00: failed to clear UNIT ATTENTION (err_mask=0x5) [ 9648.984619] ata1.00: disabled [ 9649.000593] ata1: hard resetting link [ 9649.939902] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 9649.955864] ata1: EH complete With this patch, the drive enumerates correctly when libata is loaded with atapi_dmadir=1: [ 9891.810863] ata1: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen [ 9891.810874] ata1: irq_stat 0x00000040, connection status changed [ 9891.810884] ata1: SError: { CommWake 10B8B DevExch } [ 9891.810900] ata1: hard resetting link [ 9892.762105] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 9892.763544] ata1.00: ATAPI: PIONEER DVD-RW DVR-115, 1.06, max UDMA/33, DMADIR [ 9892.763558] ata1.00: applying bridge limits [ 9892.765393] ata1.00: configured for UDMA/33 [ 9892.786063] ata1: EH complete [ 9892.792062] scsi 0:0:0:0: CD-ROM PIONEER DVD-RW DVR-115 1.06 PQ: 0 ANSI: 5 [ 9892.798455] sr2: scsi3-mmc drive: 12x/12x writer dvd-ram cd/rw xa/form2 cdda tray [ 9892.798837] sr 0:0:0:0: Attached scsi CD-ROM sr2 [ 9892.799109] sr 0:0:0:0: Attached scsi generic sg6 type 5 Based on a patch by Csaba Halász <csaba.halasz@gmail.com> on linux-ide: http://marc.info/?l=linux-ide&m=136121147832295&w=2 tj: minor formatting changes. Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e771451c0a831d96a7c14b0ca8a8ec671d98567b upstream.

libata honors DMADIR for regular commands, but not for internal commands
used (among other) during device initialisation.

This makes SATA-host-to-PATA-device bridges based on Silicon Image SiL3611
(such as "Abit Serillel 2") end up disabled when used with an ATAPI device
after a few tries.

Log output of the bridge being hot-plugged with an ATAPI drive:

  [ 9631.212901] ata1: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen
  [ 9631.212913] ata1: irq_stat 0x00000040, connection status changed
  [ 9631.212923] ata1: SError: { CommWake 10B8B DevExch }
  [ 9631.212939] ata1: hard resetting link
  [ 9632.104962] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  [ 9632.106393] ata1.00: ATAPI: PIONEER DVD-RW  DVR-115, 1.06, max UDMA/33
  [ 9632.106407] ata1.00: applying bridge limits
  [ 9632.108151] ata1.00: configured for UDMA/33
  [ 9637.105303] ata1.00: qc timeout (cmd 0xa0)
  [ 9637.105324] ata1.00: failed to clear UNIT ATTENTION (err_mask=0x5)
  [ 9637.105335] ata1: hard resetting link
  [ 9638.044599] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  [ 9638.047878] ata1.00: configured for UDMA/33
  [ 9643.044933] ata1.00: qc timeout (cmd 0xa0)
  [ 9643.044953] ata1.00: failed to clear UNIT ATTENTION (err_mask=0x5)
  [ 9643.044963] ata1: limiting SATA link speed to 1.5 Gbps
  [ 9643.044971] ata1.00: limiting speed to UDMA/33:PIO3
  [ 9643.044979] ata1: hard resetting link
  [ 9643.984225] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
  [ 9643.987471] ata1.00: configured for UDMA/33
  [ 9648.984591] ata1.00: qc timeout (cmd 0xa0)
  [ 9648.984612] ata1.00: failed to clear UNIT ATTENTION (err_mask=0x5)
  [ 9648.984619] ata1.00: disabled
  [ 9649.000593] ata1: hard resetting link
  [ 9649.939902] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
  [ 9649.955864] ata1: EH complete

With this patch, the drive enumerates correctly when libata is loaded with
atapi_dmadir=1:

  [ 9891.810863] ata1: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen
  [ 9891.810874] ata1: irq_stat 0x00000040, connection status changed
  [ 9891.810884] ata1: SError: { CommWake 10B8B DevExch }
  [ 9891.810900] ata1: hard resetting link
  [ 9892.762105] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  [ 9892.763544] ata1.00: ATAPI: PIONEER DVD-RW  DVR-115, 1.06, max UDMA/33, DMADIR
  [ 9892.763558] ata1.00: applying bridge limits
  [ 9892.765393] ata1.00: configured for UDMA/33
  [ 9892.786063] ata1: EH complete
  [ 9892.792062] scsi 0:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-115  1.06 PQ: 0 ANSI: 5
  [ 9892.798455] sr2: scsi3-mmc drive: 12x/12x writer dvd-ram cd/rw xa/form2 cdda tray
  [ 9892.798837] sr 0:0:0:0: Attached scsi CD-ROM sr2
  [ 9892.799109] sr 0:0:0:0: Attached scsi generic sg6 type 5

Based on a patch by Csaba Halász <csaba.halasz@gmail.com> on linux-ide:
http://marc.info/?l=linux-ide&m=136121147832295&w=2

tj: minor formatting changes.

Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ata_piix: add PCI IDs for Intel BayTail 2013-06-07T19:49:32+00:00 Chew, Chiau Ee chiau.ee.chew@intel.com 2013-05-16T07:33:29+00:00 8842c5521ec29f68265a4a6bb40006f5a2ecbc84 commit fca8c90d519dedd4f4b19901d005c243f7f0bf2e upstream. Adds IDE-mode SATA Device IDs for the Intel BayTrail platform. Signed-off-by: Chew, Chiau Ee <chiau.ee.chew@intel.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit fca8c90d519dedd4f4b19901d005c243f7f0bf2e upstream.

Adds IDE-mode SATA Device IDs for the Intel BayTrail platform.

Signed-off-by: Chew, Chiau Ee <chiau.ee.chew@intel.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ata_piix: Fix DVD not dectected at some Haswell platforms 2013-04-12T16:38:45+00:00 Youquan Song youquan.song@intel.com 2013-03-06T15:49:05+00:00 b26bcbe0a7bba3321cefa4c9936e05cb58df03cb commit b55f84e2d527182e7c611d466cd0bb6ddce201de upstream. There is a quirk patch 5e5a4f5d5a08c9c504fe956391ac3dae2c66556d "ata_piix: make DVD Drive recognisable on systems with Intel Sandybridge chipsets(v2)" fixing the 4 ports IDE controller 32bit PIO mode. We've hit a problem with DVD not recognized on Haswell Desktop platform which includes Lynx Point 2-port SATA controller. This quirk patch disables 32bit PIO on this controller in IDE mode. v2: Change spelling error in statememnt pointed by Sergei Shtylyov. v3: Change comment statememnt and spliting line over 80 characters pointed by Libor Pechacek and also rebase the patch against 3.8-rc7 kernel. Tested-by: Lee, Chun-Yi <jlee@suse.com> Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b55f84e2d527182e7c611d466cd0bb6ddce201de upstream.

There is a quirk patch 5e5a4f5d5a08c9c504fe956391ac3dae2c66556d
"ata_piix: make DVD Drive recognisable on systems with Intel Sandybridge
 chipsets(v2)" fixing the 4 ports IDE controller 32bit PIO mode.

We've hit a problem with DVD not recognized on Haswell Desktop platform which
includes Lynx Point 2-port SATA controller.

This quirk patch disables 32bit PIO on this controller in IDE mode.

v2: Change spelling error in statememnt pointed by Sergei Shtylyov.
v3: Change comment statememnt and spliting line over 80 characters pointed by
    Libor Pechacek and also rebase the patch against 3.8-rc7 kernel.

Tested-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Youquan Song <youquan.song@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
libata: Set max sector to 65535 for Slimtype DVD A DS8A8SH drive 2013-04-12T16:38:44+00:00 Shan Hai shan.hai@windriver.com 2013-03-18T02:30:44+00:00 284aeebb312c2b2464673bf68b9a32e415b5145a commit a32450e127fc6e5ca6d958ceb3cfea4d30a00846 upstream. The Slimtype DVD A DS8A8SH drive locks up when max sector is smaller than 65535, and the blow backtrace is observed on locking up: INFO: task flush-8:32:1130 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. flush-8:32 D ffffffff8180cf60 0 1130 2 0x00000000 ffff880273aef618 0000000000000046 0000000000000005 ffff880273aee000 ffff880273aee000 ffff880273aeffd8 ffff880273aee010 ffff880273aee000 ffff880273aeffd8 ffff880273aee000 ffff88026e842ea0 ffff880274a10000 Call Trace: [<ffffffff8168fc2d>] schedule+0x5d/0x70 [<ffffffff8168fccc>] io_schedule+0x8c/0xd0 [<ffffffff81324461>] get_request+0x731/0x7d0 [<ffffffff8133dc60>] ? cfq_allow_merge+0x50/0x90 [<ffffffff81083aa0>] ? wake_up_bit+0x40/0x40 [<ffffffff81320443>] ? bio_attempt_back_merge+0x33/0x110 [<ffffffff813248ea>] blk_queue_bio+0x23a/0x3f0 [<ffffffff81322176>] generic_make_request+0xc6/0x120 [<ffffffff81322308>] submit_bio+0x138/0x160 [<ffffffff811d7596>] ? bio_alloc_bioset+0x96/0x120 [<ffffffff811d1f61>] submit_bh+0x1f1/0x220 [<ffffffff811d48b8>] __block_write_full_page+0x228/0x340 [<ffffffff811d3650>] ? attach_nobh_buffers+0xc0/0xc0 [<ffffffff811d8960>] ? I_BDEV+0x10/0x10 [<ffffffff811d8960>] ? I_BDEV+0x10/0x10 [<ffffffff811d4ab6>] block_write_full_page_endio+0xe6/0x100 [<ffffffff811d4ae5>] block_write_full_page+0x15/0x20 [<ffffffff811d9268>] blkdev_writepage+0x18/0x20 [<ffffffff81142527>] __writepage+0x17/0x40 [<ffffffff811438ba>] write_cache_pages+0x34a/0x4a0 [<ffffffff81142510>] ? set_page_dirty+0x70/0x70 [<ffffffff81143a61>] generic_writepages+0x51/0x80 [<ffffffff81143ab0>] do_writepages+0x20/0x50 [<ffffffff811c9ed6>] __writeback_single_inode+0xa6/0x2b0 [<ffffffff811ca861>] writeback_sb_inodes+0x311/0x4d0 [<ffffffff811caaa6>] __writeback_inodes_wb+0x86/0xd0 [<ffffffff811cad43>] wb_writeback+0x1a3/0x330 [<ffffffff816916cf>] ? _raw_spin_lock_irqsave+0x3f/0x50 [<ffffffff811b8362>] ? get_nr_inodes+0x52/0x70 [<ffffffff811cb0ac>] wb_do_writeback+0x1dc/0x260 [<ffffffff8168dd34>] ? schedule_timeout+0x204/0x240 [<ffffffff811cb232>] bdi_writeback_thread+0x102/0x2b0 [<ffffffff811cb130>] ? wb_do_writeback+0x260/0x260 [<ffffffff81083550>] kthread+0xc0/0xd0 [<ffffffff81083490>] ? kthread_worker_fn+0x1b0/0x1b0 [<ffffffff8169a3ec>] ret_from_fork+0x7c/0xb0 [<ffffffff81083490>] ? kthread_worker_fn+0x1b0/0x1b0 The above trace was triggered by "dd if=/dev/zero of=/dev/sr0 bs=2048 count=32768" It was previously working by accident, since another bug introduced by 4dce8ba94c7 (libata: Use 'bool' return value for ata_id_XXX) caused all drives to use maxsect=65535. Signed-off-by: Shan Hai <shan.hai@windriver.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a32450e127fc6e5ca6d958ceb3cfea4d30a00846 upstream.

The Slimtype DVD A  DS8A8SH drive locks up when max sector is smaller than
65535, and the blow backtrace is observed on locking up:

INFO: task flush-8:32:1130 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
flush-8:32      D ffffffff8180cf60     0  1130      2 0x00000000
 ffff880273aef618 0000000000000046 0000000000000005 ffff880273aee000
 ffff880273aee000 ffff880273aeffd8 ffff880273aee010 ffff880273aee000
 ffff880273aeffd8 ffff880273aee000 ffff88026e842ea0 ffff880274a10000
Call Trace:
 [<ffffffff8168fc2d>] schedule+0x5d/0x70
 [<ffffffff8168fccc>] io_schedule+0x8c/0xd0
 [<ffffffff81324461>] get_request+0x731/0x7d0
 [<ffffffff8133dc60>] ? cfq_allow_merge+0x50/0x90
 [<ffffffff81083aa0>] ? wake_up_bit+0x40/0x40
 [<ffffffff81320443>] ? bio_attempt_back_merge+0x33/0x110
 [<ffffffff813248ea>] blk_queue_bio+0x23a/0x3f0
 [<ffffffff81322176>] generic_make_request+0xc6/0x120
 [<ffffffff81322308>] submit_bio+0x138/0x160
 [<ffffffff811d7596>] ? bio_alloc_bioset+0x96/0x120
 [<ffffffff811d1f61>] submit_bh+0x1f1/0x220
 [<ffffffff811d48b8>] __block_write_full_page+0x228/0x340
 [<ffffffff811d3650>] ? attach_nobh_buffers+0xc0/0xc0
 [<ffffffff811d8960>] ? I_BDEV+0x10/0x10
 [<ffffffff811d8960>] ? I_BDEV+0x10/0x10
 [<ffffffff811d4ab6>] block_write_full_page_endio+0xe6/0x100
 [<ffffffff811d4ae5>] block_write_full_page+0x15/0x20
 [<ffffffff811d9268>] blkdev_writepage+0x18/0x20
 [<ffffffff81142527>] __writepage+0x17/0x40
 [<ffffffff811438ba>] write_cache_pages+0x34a/0x4a0
 [<ffffffff81142510>] ? set_page_dirty+0x70/0x70
 [<ffffffff81143a61>] generic_writepages+0x51/0x80
 [<ffffffff81143ab0>] do_writepages+0x20/0x50
 [<ffffffff811c9ed6>] __writeback_single_inode+0xa6/0x2b0
 [<ffffffff811ca861>] writeback_sb_inodes+0x311/0x4d0
 [<ffffffff811caaa6>] __writeback_inodes_wb+0x86/0xd0
 [<ffffffff811cad43>] wb_writeback+0x1a3/0x330
 [<ffffffff816916cf>] ? _raw_spin_lock_irqsave+0x3f/0x50
 [<ffffffff811b8362>] ? get_nr_inodes+0x52/0x70
 [<ffffffff811cb0ac>] wb_do_writeback+0x1dc/0x260
 [<ffffffff8168dd34>] ? schedule_timeout+0x204/0x240
 [<ffffffff811cb232>] bdi_writeback_thread+0x102/0x2b0
 [<ffffffff811cb130>] ? wb_do_writeback+0x260/0x260
 [<ffffffff81083550>] kthread+0xc0/0xd0
 [<ffffffff81083490>] ? kthread_worker_fn+0x1b0/0x1b0
 [<ffffffff8169a3ec>] ret_from_fork+0x7c/0xb0
 [<ffffffff81083490>] ? kthread_worker_fn+0x1b0/0x1b0

 The above trace was triggered by
   "dd if=/dev/zero of=/dev/sr0 bs=2048 count=32768"

 It was previously working by accident, since another bug introduced
 by 4dce8ba94c7 (libata: Use 'bool' return value for ata_id_XXX) caused
 all drives to use maxsect=65535.

Signed-off-by: Shan Hai <shan.hai@windriver.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ata_piix: reenable MS Virtual PC guests 2013-03-14T18:29:42+00:00 Olaf Hering olaf@aepfle.de 2012-09-18T15:48:01+00:00 7ae6c92933a962e3ff8b3999f88b5c7c86841b7f commit d9904344fc4052fbe7e4dc137eba0dcdadf326bd upstream. An earlier commit cd006086fa5d91414d8ff9ff2b78fbb593878e3c ("ata_piix: defer disks to the Hyper-V drivers by default") broke MS Virtual PC guests. Hyper-V guests and Virtual PC guests have nearly identical DMI info. As a result the driver does currently ignore the emulated hardware in Virtual PC guests and defers the handling to hv_blkvsc. Since Virtual PC does not offer paravirtualized drivers no disks will be found in the guest. One difference in the DMI info is the product version. This patch adds a match for MS Virtual PC 2007 and "unignores" the emulated hardware. This was reported for openSuSE 12.1 in bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=737532 Here is a detailed list of DMI info from example guests: hwinfo --bios: virtual pc guest: System Info: #1 Manufacturer: "Microsoft Corporation" Product: "Virtual Machine" Version: "VS2005R2" Serial: "3178-9905-1533-4840-9282-0569-59" UUID: undefined, but settable Wake-up: 0x06 (Power Switch) Board Info: #2 Manufacturer: "Microsoft Corporation" Product: "Virtual Machine" Version: "5.0" Serial: "3178-9905-1533-4840-9282-0569-59" Chassis Info: #3 Manufacturer: "Microsoft Corporation" Version: "5.0" Serial: "3178-9905-1533-4840-9282-0569-59" Asset Tag: "7188-3705-6309-9738-9645-0364-00" Type: 0x03 (Desktop) Bootup State: 0x03 (Safe) Power Supply State: 0x03 (Safe) Thermal State: 0x01 (Other) Security Status: 0x01 (Other) win2k8 guest: System Info: #1 Manufacturer: "Microsoft Corporation" Product: "Virtual Machine" Version: "7.0" Serial: "9106-3420-9819-5495-1514-2075-48" UUID: undefined, but settable Wake-up: 0x06 (Power Switch) Board Info: #2 Manufacturer: "Microsoft Corporation" Product: "Virtual Machine" Version: "7.0" Serial: "9106-3420-9819-5495-1514-2075-48" Chassis Info: #3 Manufacturer: "Microsoft Corporation" Version: "7.0" Serial: "9106-3420-9819-5495-1514-2075-48" Asset Tag: "7076-9522-6699-1042-9501-1785-77" Type: 0x03 (Desktop) Bootup State: 0x03 (Safe) Power Supply State: 0x03 (Safe) Thermal State: 0x01 (Other) Security Status: 0x01 (Other) win2k12 guest: System Info: #1 Manufacturer: "Microsoft Corporation" Product: "Virtual Machine" Version: "7.0" Serial: "8179-1954-0187-0085-3868-2270-14" UUID: undefined, but settable Wake-up: 0x06 (Power Switch) Board Info: #2 Manufacturer: "Microsoft Corporation" Product: "Virtual Machine" Version: "7.0" Serial: "8179-1954-0187-0085-3868-2270-14" Chassis Info: #3 Manufacturer: "Microsoft Corporation" Version: "7.0" Serial: "8179-1954-0187-0085-3868-2270-14" Asset Tag: "8374-0485-4557-6331-0620-5845-25" Type: 0x03 (Desktop) Bootup State: 0x03 (Safe) Power Supply State: 0x03 (Safe) Thermal State: 0x01 (Other) Security Status: 0x01 (Other) Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit d9904344fc4052fbe7e4dc137eba0dcdadf326bd upstream.

An earlier commit cd006086fa5d91414d8ff9ff2b78fbb593878e3c ("ata_piix:
defer disks to the Hyper-V drivers by default") broke MS Virtual PC
guests. Hyper-V guests and Virtual PC guests have nearly identical DMI
info. As a result the driver does currently ignore the emulated hardware
in Virtual PC guests and defers the handling to hv_blkvsc. Since Virtual
PC does not offer paravirtualized drivers no disks will be found in the
guest.

One difference in the DMI info is the product version. This patch adds a
match for MS Virtual PC 2007 and "unignores" the emulated hardware.

This was reported for openSuSE 12.1 in bugzilla:
https://bugzilla.novell.com/show_bug.cgi?id=737532

Here is a detailed list of DMI info from example guests:

hwinfo --bios:

virtual pc guest:

  System Info: #1
    Manufacturer: "Microsoft Corporation"
    Product: "Virtual Machine"
    Version: "VS2005R2"
    Serial: "3178-9905-1533-4840-9282-0569-59"
    UUID: undefined, but settable
    Wake-up: 0x06 (Power Switch)
  Board Info: #2
    Manufacturer: "Microsoft Corporation"
    Product: "Virtual Machine"
    Version: "5.0"
    Serial: "3178-9905-1533-4840-9282-0569-59"
  Chassis Info: #3
    Manufacturer: "Microsoft Corporation"
    Version: "5.0"
    Serial: "3178-9905-1533-4840-9282-0569-59"
    Asset Tag: "7188-3705-6309-9738-9645-0364-00"
    Type: 0x03 (Desktop)
    Bootup State: 0x03 (Safe)
    Power Supply State: 0x03 (Safe)
    Thermal State: 0x01 (Other)
    Security Status: 0x01 (Other)

win2k8 guest:

  System Info: #1
    Manufacturer: "Microsoft Corporation"
    Product: "Virtual Machine"
    Version: "7.0"
    Serial: "9106-3420-9819-5495-1514-2075-48"
    UUID: undefined, but settable
    Wake-up: 0x06 (Power Switch)
  Board Info: #2
    Manufacturer: "Microsoft Corporation"
    Product: "Virtual Machine"
    Version: "7.0"
    Serial: "9106-3420-9819-5495-1514-2075-48"
  Chassis Info: #3
    Manufacturer: "Microsoft Corporation"
    Version: "7.0"
    Serial: "9106-3420-9819-5495-1514-2075-48"
    Asset Tag: "7076-9522-6699-1042-9501-1785-77"
    Type: 0x03 (Desktop)
    Bootup State: 0x03 (Safe)
    Power Supply State: 0x03 (Safe)
    Thermal State: 0x01 (Other)
    Security Status: 0x01 (Other)

win2k12 guest:

  System Info: #1
    Manufacturer: "Microsoft Corporation"
    Product: "Virtual Machine"
    Version: "7.0"
    Serial: "8179-1954-0187-0085-3868-2270-14"
    UUID: undefined, but settable
    Wake-up: 0x06 (Power Switch)
  Board Info: #2
    Manufacturer: "Microsoft Corporation"
    Product: "Virtual Machine"
    Version: "7.0"
    Serial: "8179-1954-0187-0085-3868-2270-14"
  Chassis Info: #3
    Manufacturer: "Microsoft Corporation"
    Version: "7.0"
    Serial: "8179-1954-0187-0085-3868-2270-14"
    Asset Tag: "8374-0485-4557-6331-0620-5845-25"
    Type: 0x03 (Desktop)
    Bootup State: 0x03 (Safe)
    Power Supply State: 0x03 (Safe)
    Thermal State: 0x01 (Other)
    Security Status: 0x01 (Other)

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ata_piix: Add Device IDs for Intel Wellsburg PCH 2013-03-03T22:06:45+00:00 James Ralston james.d.ralston@intel.com 2013-02-09T01:24:12+00:00 a059654e30e7f0d0aaba17a44165332443d3f48e commit 3aee8bc52c415aba8148f144e5e5359b0fd75dd1 upstream. This patch adds the IDE-mode SATA Device IDs for the Intel Wellsburg PCH Signed-off-by: James Ralston <james.d.ralston@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 3aee8bc52c415aba8148f144e5e5359b0fd75dd1 upstream.

This patch adds the IDE-mode SATA Device IDs for the Intel Wellsburg PCH

Signed-off-by: James Ralston <james.d.ralston@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>