linux-toradex.git/drivers/base/power/runtime.c, branch v6.3-rc5

Merge tag 'pm-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2023-02-21T20:13:58+00:00

Pull power management updates from Rafael Wysocki:
 "These add EPP support to the AMD P-state cpufreq driver, add support
  for new platforms to the Intel RAPL power capping driver, intel_idle
  and the Qualcomm cpufreq driver, enable thermal cooling for Tegra194,
  drop the custom cpufreq driver for loongson1 that is not necessary any
  more (and the corresponding cpufreq platform device), fix assorted
  issues and clean up code.

  Specifics:

   - Add EPP support to the AMD P-state cpufreq driver (Perry Yuan, Wyes
     Karny, Arnd Bergmann, Bagas Sanjaya)

   - Drop the custom cpufreq driver for loongson1 that is not necessary
     any more and the corresponding cpufreq platform device (Keguang
     Zhang)

   - Remove "select SRCU" from system sleep, cpufreq and OPP Kconfig
     entries (Paul E. McKenney)

   - Enable thermal cooling for Tegra194 (Yi-Wei Wang)

   - Register module device table and add missing compatibles for
     cpufreq-qcom-hw (Nícolas F. R. A. Prado, Abel Vesa and Luca Weiss)

   - Various dt binding updates for qcom-cpufreq-nvmem and
     opp-v2-kryo-cpu (Christian Marangi)

   - Make kobj_type structure in the cpufreq core constant (Thomas
     Weißschuh)

   - Make cpufreq_unregister_driver() return void (Uwe Kleine-König)

   - Make the TEO cpuidle governor check CPU utilization in order to
     refine idle state selection (Kajetan Puchalski)

   - Make Kconfig select the haltpoll cpuidle governor when the haltpoll
     cpuidle driver is selected and replace a default_idle() call in
     that driver with arch_cpu_idle() to allow MWAIT to be used (Li
     RongQing)

   - Add Emerald Rapids Xeon support to the intel_idle driver (Artem
     Bityutskiy)

   - Add ARCH_SUSPEND_POSSIBLE dependencies for ARMv4 cpuidle drivers to
     avoid randconfig build failures (Arnd Bergmann)

   - Make kobj_type structures used in the cpuidle sysfs interface
     constant (Thomas Weißschuh)

   - Make the cpuidle driver registration code update microsecond values
     of idle state parameters in accordance with their nanosecond values
     if they are provided (Rafael Wysocki)

   - Make the PSCI cpuidle driver prevent topology CPUs from being
     suspended on PREEMPT_RT (Krzysztof Kozlowski)

   - Document that pm_runtime_force_suspend() cannot be used with
     DPM_FLAG_SMART_SUSPEND (Richard Fitzgerald)

   - Add EXPORT macros for exporting PM functions from drivers (Richard
     Fitzgerald)

   - Remove /** from non-kernel-doc comments in hibernation code (Randy
     Dunlap)

   - Fix possible name leak in powercap_register_zone() (Yang Yingliang)

   - Add Meteor Lake and Emerald Rapids support to the intel_rapl power
     capping driver (Zhang Rui)

   - Modify the idle_inject power capping facility to support 100% idle
     injection (Srinivas Pandruvada)

   - Fix large time windows handling in the intel_rapl power capping
     driver (Zhang Rui)

   - Fix memory leaks with using debugfs_lookup() in the generic PM
     domains and Energy Model code (Greg Kroah-Hartman)

   - Add missing 'cache-unified' property in the example for kryo OPP
     bindings (Rob Herring)

   - Fix error checking in opp_migrate_dentry() (Qi Zheng)

   - Let qcom,opp-fuse-level be a 2-long array for qcom SoCs (Konrad
     Dybcio)

   - Modify some power management utilities to use the canonical ftrace
     path (Ross Zwisler)

   - Correct spelling problems for Documentation/power/ as reported by
     codespell (Randy Dunlap)"

* tag 'pm-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (53 commits)
  Documentation: amd-pstate: disambiguate user space sections
  cpufreq: amd-pstate: Fix invalid write to MSR_AMD_CPPC_REQ
  dt-bindings: opp: opp-v2-kryo-cpu: enlarge opp-supported-hw maximum
  dt-bindings: cpufreq: qcom-cpufreq-nvmem: make cpr bindings optional
  dt-bindings: cpufreq: qcom-cpufreq-nvmem: specify supported opp tables
  PM: Add EXPORT macros for exporting PM functions
  cpuidle: psci: Do not suspend topology CPUs on PREEMPT_RT
  MIPS: loongson32: Drop obsolete cpufreq platform device
  powercap: intel_rapl: Fix handling for large time window
  cpuidle: driver: Update microsecond values of state parameters as needed
  cpuidle: sysfs: make kobj_type structures constant
  cpuidle: add ARCH_SUSPEND_POSSIBLE dependencies
  PM: EM: fix memory leak with using debugfs_lookup()
  PM: domains: fix memory leak with using debugfs_lookup()
  cpufreq: Make kobj_type structure constant
  cpufreq: davinci: Fix clk use after free
  cpufreq: amd-pstate: avoid uninitialized variable use
  cpufreq: Make cpufreq_unregister_driver() return void
  OPP: fix error checking in opp_migrate_dentry()
  dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM8550 compatible
  ...

PM: runtime: Document that force_suspend() is incompatible with SMART_SUSPEND

2023-01-13T19:53:44+00:00

pm_runtime_force_suspend() cannot be used with DPM_FLAG_SMART_SUSPEND, so
note this in the kerneldoc.

If DPM_FLAG_SMART_SUSPEND is set and the PM core cannot skip system resume
it will call pm_runtime_active() on the driver. This can lead to an
inconsistent state where:

  pm_runtime_force_suspend() called ->runtime_suspend

but

  device_resume_noirq() called pm_runtime_set_active()

This leaves the driver actually suspended but marked as active.

Signed-off-by: Richard Fitzgerald 
Signed-off-by: Rafael J. Wysocki

cpuidle, ARM: OMAP2+: powerdomain: Remove trace_.*_rcuidle()

2023-01-13T10:48:17+00:00

OMAP was the one and only user.

Signed-off-by: Peter Zijlstra (Intel) 
Signed-off-by: Ingo Molnar 
Tested-by: Tony Lindgren 
Tested-by: Ulf Hansson 
Reviewed-by: Ulf Hansson 
Acked-by: Rafael J. Wysocki 
Acked-by: Frederic Weisbecker 
Link: https://lore.kernel.org/r/20230112195541.782536366@infradead.org

PM: runtime: Adjust white space in the core code

2022-12-07T17:23:32+00:00

Some inconsistent usage of white space in the PM-runtime core code
causes that code to be somewhat harder to read that it would have
been otherwise, so adjust the white space in there to be more
consistent with the rest of the code.

No expected functional impact.

Signed-off-by: Rafael J. Wysocki

PM: runtime: Relocate rpm_callback() right after __rpm_callback()

2022-12-05T14:43:37+00:00

Because rpm_callback() is a wrapper around __rpm_callback(), and the
only caller of it after the change eliminating an invocation of it
from rpm_idle(), move the former next to the latter to make the code
a bit easier to follow.

Signed-off-by: Rafael J. Wysocki 
Reviewed-by: Adrian Hunter

PM: runtime: Do not call __rpm_callback() from rpm_idle()

2022-12-05T14:43:37+00:00

Calling __rpm_callback() from rpm_idle() after adding device links
support to the former is a clear mistake.

Not only it causes rpm_idle() to carry out unnecessary actions, but it
is also against the assumption regarding the stability of PM-runtime
status across __rpm_callback() invocations, because rpm_suspend() and
rpm_resume() may run in parallel with __rpm_callback() when it is called
by rpm_idle() and the device's PM-runtime status can be updated by any
of them.

Fixes: 21d5c57b3726 ("PM / runtime: Use device links")
Link: https://lore.kernel.org/linux-pm/36aed941-a73e-d937-2721-4f0decd61ce0@quicinc.com
Signed-off-by: Rafael J. Wysocki 
Reviewed-by: Adrian Hunter

PM: runtime: Return -EINPROGRESS from rpm_resume() in the RPM_NOWAIT case

2022-09-24T17:28:51+00:00

The prospective callers of rpm_resume() passing RPM_NOWAIT to it may
be confused when it returns 0 without actually resuming the device
which may happen if the device is suspending at the given time and it
will only resume when the suspend in progress has completed.  To avoid
that confusion, return -EINPROGRESS from rpm_resume() in that case.

Since none of the current callers passing RPM_NOWAIT to rpm_resume()
check its return value, this change has no functional impact.

Signed-off-by: Rafael J. Wysocki 
Acked-by: Alan Stern 
Reviewed-by: Douglas Anderson 
Reviewed-by: Ulf Hansson

PM: runtime: Extend support for wakeirq for force_suspend|resume

2022-07-08T19:29:06+00:00

A driver that makes use of pm_runtime_force_suspend|resume() to support
system suspend/resume, currently needs to manage the wakeirq support
itself. To avoid the boilerplate code in the driver's system suspend/resume
callbacks in particular, let's extend pm_runtime_force_suspend|resume() to
deal with the wakeirq.

Signed-off-by: Ulf Hansson 
Reviewed-by: Tony Lindgren 
Signed-off-by: Rafael J. Wysocki

PM: runtime: Fix supplier device management during consumer probe

2022-07-01T19:04:15+00:00

Because pm_runtime_get_suppliers() bumps up the rpm_active counter
of each device link to a supplier of the given device in addition
to bumping up the supplier's PM-runtime usage counter, a runtime
suspend of the consumer device may case the latter to go down to 0
when pm_runtime_put_suppliers() is running on a remote CPU.  If that
happens after pm_runtime_put_suppliers() has released power.lock for
the consumer device, and a runtime resume of that device takes place
immediately after it, before pm_runtime_put() is called for the
supplier, that pm_runtime_put() call may cause the supplier to be
suspended even though the consumer is active.

To prevent that from happening, modify pm_runtime_get_suppliers() to
call pm_runtime_get_sync() for the given device's suppliers without
touching the rpm_active counters of the involved device links
Accordingly, modify pm_runtime_put_suppliers() to call pm_runtime_put()
for the given device's suppliers without looking at the rpm_active
counters of the device links at hand.  [This is analogous to what
happened before commit 4c06c4e6cf63 ("driver core: Fix possible
supplier PM-usage counter imbalance").]

Since pm_runtime_get_suppliers() sets supplier_preactivated for each
device link where the supplier's PM-runtime usage counter has been
incremented and pm_runtime_put_suppliers() calls pm_runtime_put() for
the suppliers whose device links have supplier_preactivated set, the
PM-runtime usage counter is balanced for each supplier and this is
independent of the runtime suspend and resume of the consumer device.

However, in case a device link with DL_FLAG_PM_RUNTIME set is dropped
during the consumer device probe, so pm_runtime_get_suppliers() bumps
up the supplier's PM-runtime usage counter, but it cannot be dropped by
pm_runtime_put_suppliers(), make device_link_release_fn() take care of
that.

Fixes: 4c06c4e6cf63 ("driver core: Fix possible supplier PM-usage counter imbalance")
Reported-by: Peter Wang 
Signed-off-by: Rafael J. Wysocki 
Reviewed-by: Greg Kroah-Hartman 
Reviewed-by: Peter Wang 
Cc: 5.1+  # 5.1+

PM: runtime: Redefine pm_runtime_release_supplier()

2022-07-01T19:04:02+00:00

Instead of passing an extra bool argument to pm_runtime_release_supplier(),
make its callers take care of triggering a runtime-suspend of the
supplier device as needed.

No expected functional impact.

Suggested-by: Greg Kroah-Hartman 
Signed-off-by: Rafael J. Wysocki 
Reviewed-by: Greg Kroah-Hartman 
Cc: 5.1+  # 5.1+