Merge changes related to system sleep, PM domains changes and power management documentation changes for 5.18-rc1: - Fix load_image_and_restore() error path (Ye Bin). - Fix typos in comments in the system wakeup hadling code (Tom Rix). - Clean up non-kernel-doc comments in hibernation code (Jiapeng Chong). - Fix __setup handler error handling in system-wide suspend and hibernation core code (Randy Dunlap). - Add device name to suspend_report_result() (Youngjin Jang). - Make virtual guests honour ACPI S4 hardware signature by default (David Woodhouse). - Block power off of a parent PM domain unless child is in deepest state (Ulf Hansson). - Use dev_err_probe() to simplify error handling for generic PM domains (Ahmad Fatoum). - Fix sleep-in-atomic bug caused by genpd_debug_remove() (Shawn Guo). - Document Intel uncore frequency scaling (Srinivas Pandruvada). * pm-sleep: PM: hibernate: Honour ACPI hardware signature by default for virtual guests PM: sleep: Add device name to suspend_report_result() PM: suspend: fix return value of __setup handler PM: hibernate: fix __setup handler error handling PM: hibernate: Clean up non-kernel-doc comments PM: sleep: wakeup: Fix typos in comments PM: hibernate: fix load_image_and_restore() error path * pm-domains: PM: domains: Fix sleep-in-atomic bug caused by genpd_debug_remove() PM: domains: use dev_err_probe() to simplify error handling PM: domains: Prevent power off for parent unless child is in deepest state * pm-docs: Documentation: admin-guide: pm: Document uncore frequency scaling
The function device_pm_check_callbacks() can be called under the spin lock (in the reported case it happens from genpd_add_device() -> dev_pm_domain_set(), when the genpd uses spinlocks rather than mutexes. However this function uncoditionally uses spin_lock_irq() / spin_unlock_irq(), thus not preserving the CPU flags. Use the irqsave/irqrestore instead. The backtrace for the reference: [ 2.752010] ------------[ cut here ]------------ [ 2.756769] raw_local_irq_restore() called with IRQs enabled [ 2.762596] WARNING: CPU: 4 PID: 1 at kernel/locking/irqflag-debug.c:10 warn_bogus_irq_restore+0x34/0x50 [ 2.772338] Modules linked in: [ 2.775487] CPU: 4 PID: 1 Comm: swapper/0 Tainted: G S 5.17.0-rc6-00384-ge330d0d82eff-dirty #684 [ 2.781384] Freeing initrd memory: 46024K [ 2.785839] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 2.785841] pc : warn_bogus_irq_restore+0x34/0x50 [ 2.785844] lr : warn_bogus_irq_restore+0x34/0x50 [ 2.785846] sp : ffff80000805b7d0 [ 2.785847] x29: ffff80000805b7d0 x28: 0000000000000000 x27: 0000000000000002 [ 2.785850] x26: ffffd40e80930b18 x25: ffff7ee2329192b8 x24: ffff7edfc9f60800 [ 2.785853] x23: ffffd40e80930b18 x22: ffffd40e80930d30 x21: ffff7edfc0dffa00 [ 2.785856] x20: ffff7edfc09e3768 x19: 0000000000000000 x18: ffffffffffffffff [ 2.845775] x17: 6572206f74206465 x16: 6c696166203a3030 x15: ffff80008805b4f7 [ 2.853108] x14: 0000000000000000 x13: ffffd40e809550b0 x12: 00000000000003d8 [ 2.860441] x11: 0000000000000148 x10: ffffd40e809550b0 x9 : ffffd40e809550b0 [ 2.867774] x8 : 00000000ffffefff x7 : ffffd40e809ad0b0 x6 : ffffd40e809ad0b0 [ 2.875107] x5 : 000000000000bff4 x4 : 0000000000000000 x3 : 0000000000000000 [ 2.882440] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff7edfc03a8000 [ 2.889774] Call trace: [ 2.892290] warn_bogus_irq_restore+0x34/0x50 [ 2.896770] _raw_spin_unlock_irqrestore+0x94/0xa0 [ 2.901690] genpd_unlock_spin+0x20/0x30 [ 2.905724] genpd_add_device+0x100/0x2d0 [ 2.909850] __genpd_dev_pm_attach+0xa8/0x23c [ 2.914329] genpd_dev_pm_attach_by_id+0xc4/0x190 [ 2.919167] genpd_dev_pm_attach_by_name+0x3c/0xd0 [ 2.924086] dev_pm_domain_attach_by_name+0x24/0x30 [ 2.929102] psci_dt_attach_cpu+0x24/0x90 [ 2.933230] psci_cpuidle_probe+0x2d4/0x46c [ 2.937534] platform_probe+0x68/0xe0 [ 2.941304] really_probe.part.0+0x9c/0x2fc [ 2.945605] __driver_probe_device+0x98/0x144 [ 2.950085] driver_probe_device+0x44/0x15c [ 2.954385] __device_attach_driver+0xb8/0x120 [ 2.958950] bus_for_each_drv+0x78/0xd0 [ 2.962896] __device_attach+0xd8/0x180 [ 2.966843] device_initial_probe+0x14/0x20 [ 2.971144] bus_probe_device+0x9c/0xa4 [ 2.975092] device_add+0x380/0x88c [ 2.978679] platform_device_add+0x114/0x234 [ 2.983067] platform_device_register_full+0x100/0x190 [ 2.988344] psci_idle_init+0x6c/0xb0 [ 2.992113] do_one_initcall+0x74/0x3a0 [ 2.996060] kernel_init_freeable+0x2fc/0x384 [ 3.000543] kernel_init+0x28/0x130 [ 3.004132] ret_from_fork+0x10/0x20 [ 3.007817] irq event stamp: 319826 [ 3.011404] hardirqs last enabled at (319825): [<ffffd40e7eda0268>] __up_console_sem+0x78/0x84 [ 3.020332] hardirqs last disabled at (319826): [<ffffd40e7fd6d9d8>] el1_dbg+0x24/0x8c [ 3.028458] softirqs last enabled at (318312): [<ffffd40e7ec90410>] _stext+0x410/0x588 [ 3.036678] softirqs last disabled at (318299): [<ffffd40e7ed1bf68>] __irq_exit_rcu+0x158/0x174 [ 3.045607] ---[ end trace 0000000000000000 ]--- Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently, suspend_report_result() prints only function information. If any driver uses a common PM function, nobody knows who exactly called the failing function. A device pinter is needed to recognize the failing device. For example: PM: dpm_run_callback(): pnp_bus_suspend+0x0/0x10 returns 0 PM: dpm_run_callback(): pci_pm_suspend+0x0/0x150 returns 0 become after the change: serial 00:05: PM: dpm_run_callback(): pnp_bus_suspend+0x0/0x10 returns 0 pci 0000:00:01.3: PM: dpm_run_callback(): pci_pm_suspend+0x0/0x150 returns 0 Signed-off-by: Youngjin Jang <yj84.jang@samsung.com> [ rjw: Changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The PM Runtime docs say: Drivers in ->remove() callback should undo the runtime PM changes done in ->probe(). Usually this means calling pm_runtime_disable(), pm_runtime_dont_use_autosuspend() etc. From grepping code, it's clear that many people aren't aware of the need to call pm_runtime_dont_use_autosuspend(). When brainstorming solutions, one idea that came up was to leverage the new-ish devm_pm_runtime_enable() function. The idea here is that: * When the devm action is called we know that the driver is being removed. It's the perfect time to undo the use_autosuspend. * The code of pm_runtime_dont_use_autosuspend() already handles the case of being called when autosuspend wasn't enabled. Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Remove the second 'the'. Replace the second 'of' with 'the'. Replace 'couter' with 'counter'. Signed-off-by: Tom Rix <trix@redhat.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When a genpd with GENPD_FLAG_IRQ_SAFE gets removed, the following
sleep-in-atomic bug will be seen, as genpd_debug_remove() will be called
with a spinlock being held.
[ 0.029183] BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1460
[ 0.029204] in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 1, name: swapper/0
[ 0.029219] preempt_count: 1, expected: 0
[ 0.029230] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.17.0-rc4+ #489
[ 0.029245] Hardware name: Thundercomm TurboX CM2290 (DT)
[ 0.029256] Call trace:
[ 0.029265] dump_backtrace.part.0+0xbc/0xd0
[ 0.029285] show_stack+0x3c/0xa0
[ 0.029298] dump_stack_lvl+0x7c/0xa0
[ 0.029311] dump_stack+0x18/0x34
[ 0.029323] __might_resched+0x10c/0x13c
[ 0.029338] __might_sleep+0x4c/0x80
[ 0.029351] down_read+0x24/0xd0
[ 0.029363] lookup_one_len_unlocked+0x9c/0xcc
[ 0.029379] lookup_positive_unlocked+0x10/0x50
[ 0.029392] debugfs_lookup+0x68/0xac
[ 0.029406] genpd_remove.part.0+0x12c/0x1b4
[ 0.029419] of_genpd_remove_last+0xa8/0xd4
[ 0.029434] psci_cpuidle_domain_probe+0x174/0x53c
[ 0.029449] platform_probe+0x68/0xe0
[ 0.029462] really_probe+0x190/0x430
[ 0.029473] __driver_probe_device+0x90/0x18c
[ 0.029485] driver_probe_device+0x40/0xe0
[ 0.029497] __driver_attach+0xf4/0x1d0
[ 0.029508] bus_for_each_dev+0x70/0xd0
[ 0.029523] driver_attach+0x24/0x30
[ 0.029534] bus_add_driver+0x164/0x22c
[ 0.029545] driver_register+0x78/0x130
[ 0.029556] __platform_driver_register+0x28/0x34
[ 0.029569] psci_idle_init_domains+0x1c/0x28
[ 0.029583] do_one_initcall+0x50/0x1b0
[ 0.029595] kernel_init_freeable+0x214/0x280
[ 0.029609] kernel_init+0x2c/0x13c
[ 0.029622] ret_from_fork+0x10/0x20
It doesn't seem necessary to call genpd_debug_remove() with the lock, so
move it out from locking to fix the problem.
Fixes: 718072ceb211 ("PM: domains: create debugfs nodes when adding power domains")
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: 5.11+ <stable@vger.kernel.org> # 5.11+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
dev_err_probe() can reduce code size, makes the code easier to read and has the added benefit of recording the defer reason for later read out. Use it where appropriate. This also fixes an issue, where an error message in __genpd_dev_pm_attach was not terminated by a line break. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
A PM domain managed by genpd may support multiple idlestates (power-off states). During genpd_power_off() a genpd governor may be asked to select one of the idlestates based upon the dev PM QoS constraints, for example. However, there is a problem with the behaviour around this in genpd. More precisely, a parent-domain is allowed to be powered off, no matter of what idlestate that has been selected for the child-domain. For the stm32mp1 platform from STMicro, this behaviour doesn't play well. Instead, the parent-domain must not be powered off, unless the deepest idlestate has been selected for the child-domain. As the current behaviour in genpd is quite questionable anyway, let's simply change it into what is needed by the stm32mp1 platform. If it surprisingly turns out that other platforms may need a different behaviour from genpd, then we will have to revisit this to find a way to make it configurable. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
After commit e3728b50cd9b ("ACPI: PM: s2idle: Avoid possible race
related to the EC GPE") wakeup interrupts occurring immediately after
the one discarded by acpi_s2idle_wake() may be missed. Moreover, if
the SCI triggers again immediately after the rearming in
acpi_s2idle_wake(), that wakeup may be missed too.
The problem is that pm_system_irq_wakeup() only calls pm_system_wakeup()
when pm_wakeup_irq is 0, but that's not the case any more after the
interrupt causing acpi_s2idle_wake() to run until pm_wakeup_irq is
cleared by the pm_wakeup_clear() call in s2idle_loop(). However,
there may be wakeup interrupts occurring in that time frame and if
that happens, they will be missed.
To address that issue first move the clearing of pm_wakeup_irq to
the point at which it is known that the interrupt causing
acpi_s2idle_wake() to tun will be discarded, before rearming the SCI
for wakeup. Moreover, because that only reduces the size of the
time window in which the issue may manifest itself, allow
pm_system_irq_wakeup() to register two second wakeup interrupts in
a row and, when discarding the first one, replace it with the second
one. [Of course, this assumes that only one wakeup interrupt can be
discarded in one go, but currently that is the case and I am not
aware of any plans to change that.]
Fixes: e3728b50cd9b ("ACPI: PM: s2idle: Avoid possible race related to the EC GPE")
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull RTC updates from Alexandre Belloni: "Two new drivers this cycle and a significant rework of the CMOS driver make the bulk of the changes. I also carry powerpc changes with the agreement of Michael. New drivers: - Sunplus SP7021 RTC - Nintendo GameCube, Wii and Wii U RTC Driver updates: - cmos: refactor UIP handling and presence check, fix century - rs5c372: offset correction support, report low voltage - rv8803: Epson RX8804 support" * tag 'rtc-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (33 commits) rtc: sunplus: fix return value in sp_rtc_probe() rtc: cmos: Evaluate century appropriate rtc: gamecube: Fix an IS_ERR() vs NULL check rtc: mc146818-lib: fix signedness bug in mc146818_get_time() dt-bindings: rtc: qcom-pm8xxx-rtc: update register numbers rtc: pxa: fix null pointer dereference rtc: ftrtc010: Use platform_get_irq() to get the interrupt rtc: Move variable into switch case statement rtc: pcf2127: Fix typo in comment dt-bindings: rtc: Add Sunplus RTC json-schema rtc: Add driver for RTC in Sunplus SP7021 rtc: rs5c372: fix incorrect oscillation value on r2221tl rtc: rs5c372: add offset correction support rtc: cmos: avoid UIP when writing alarm time rtc: cmos: avoid UIP when reading alarm time rtc: mc146818-lib: refactor mc146818_does_rtc_work rtc: mc146818-lib: refactor mc146818_get_time rtc: mc146818-lib: extract mc146818_avoid_UIP rtc: mc146818-lib: fix RTC presence check rtc: Check return value from mc146818_get_time() ...