The regmap API usually assumes that bulk read operations will read a
range of registers but some I2C/SPI devices have certain registers for
which a such a read operation will return data from an internal FIFO
instead. Add an explicit API to support bulk read without range semantics.

Some linux drivers use regmap_bulk_read or regmap_raw_read for such
registers, for example mpu6050 or bmi150 from IIO. This only happens to
work because when caching is disabled a single regmap read op will map
to a single bus read op (as desired). This breaks if caching is enabled and
reg+1 happens to be a cacheable register.

Without regmap support refactoring a driver to enable regmap caching
requires separate I2C and SPI paths. This is exactly what regmap is
supposed to help avoid.

Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com>
Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

The recently added support for disabling the regmap internal locking left
debugfs enabled for devices with the locking disabled. This is a problem
since debugfs allows userspace to do things like initiate reads from the
hardware which will use the scratch buffers protected by the regmap locking
so could cause data corruption.

For safety address this by just disabling debugfs for these devices. That
is overly conservative since some of the debugfs files just read internal
data structures but it's much simpler to implmement and less likely to
lead to problems with tooling that works with debugfs.

Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

On some platforms, when reading or writing some special registers through
regmap, we should acquire one hardware spinlock to synchronize between
the multiple subsystems. Thus this patch adds the hardware spinlock
support for regmap.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

We currently only support masking the top bit for read and write
flags. Let's make the mask unsigned long and mask the bytes based
on the configured register length to make things more generic.

This allows using regmap for more exotic combinations like SPI
devices that need little endian addressing.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add a function to check if a regmap register is cached. This will be used
in debugfs to dump the cached values of write only registers.

Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

internal.h is using dev_name() but doesn't include device.h which
defines it.  Add an explicit include to avoid build problems due to
this.

Tested-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Here introduces regcache_get_index_by_order() for regmap cache,
which uses the register stride order and bit rotation, to improve
the performance.

Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Since the register stride should always equal to 2^N, and bit rotation is
much faster than multiplication and division. So introducing the stride
order and using bit rotation to get the offset of the register from the
index to improve the performance.

Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Pull driver core updates from Greg KH:
 "Here's the "big" driver core updates for 4.4-rc1.  Primarily a bunch
  of debugfs updates, with a smattering of minor driver core fixes and
  updates as well.

  All have been in linux-next for a long time"

* tag 'driver-core-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  debugfs: Add debugfs_create_ulong()
  of: to support binding numa node to specified device in devicetree
  debugfs: Add read-only/write-only bool file ops
  debugfs: Add read-only/write-only size_t file ops
  debugfs: Add read-only/write-only x64 file ops
  debugfs: Consolidate file mode checks in debugfs_create_*()
  Revert "mm: Check if section present during memory block (un)registering"
  driver-core: platform: Provide helpers for multi-driver modules
  mm: Check if section present during memory block (un)registering
  devres: fix a for loop bounds check
  CMA: fix CONFIG_CMA_SIZE_MBYTES overflow in 64bit
  base/platform: assert that dev_pm_domain callbacks are called unconditionally
  sysfs: correctly handle short reads on PREALLOC attrs.
  base: soc: siplify ida usage
  kobject: move EXPORT_SYMBOL() macros next to corresponding definitions
  kobject: explain what kobject's sd field is
  debugfs: document that debugfs_remove*() accepts NULL and error values
  debugfs: Pass bool pointer to debugfs_create_bool()
  ACPI / EC: Fix broken 64bit big-endian users of 'global_lock'