commit 176fc2d5770a0990eebff903ba680d2edd32e718 upstream.

The in kernel snprintf() will conveniently return the actual length of
the printed string even if not given an output beffer at all so just do
that rather than relying on the user to pass in a suitable buffer,
ensuring that we don't need to worry if the buffer was truncated due to
the size of the buffer passed in.

Reported-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit b763ec17ac762470eec5be8ebcc43e4f8b2c2b82 upstream.

If a read is attempted which is smaller than the line length then we may
underflow the subtraction we're doing with the unsigned size_t type so
move some of the calculation to be additions on the right hand side
instead in order to avoid this.

Reported-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 5844a8b9d98ec11ce1d77610daacf3f0a0e14715 upstream.

A previous over-zealous factorisation of code means that we only treat
registers as volatile if they are readable. For most devices this is fine
since normally most registers can be read and volatility implies
readability but for format_write() devices where there is no readback from
the hardware and we use volatility to mean simply uncacheability this means
that we end up treating all registers as cacheble.

A bigger refactoring of the code to clarify this is in order but as a fix
make a minimal change and only check readability when checking volatility
if there is no format_write() operation defined for the device.

Signed-off-by: Mark Brown <broonie@linaro.org>
Tested-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 4191f19792bf91267835eb090d970e9cd6277a65 upstream.

Using .format_write means, we have a custom function to write to the
chip, but not to read back. Also, mark registers as "not precious" and
"not volatile" which is implicit because we cannot read them. Make those
functions use 'regmap_readable' to reuse the checks done there.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit db04328c167ff8e7c57f4a3532214aeada3a82fd upstream.

If count is less than the size of a register then we may hit integer
wraparound when trying to move backwards to check if we're still in
the buffer. Instead move the position forwards to check if it's still
in the buffer, we are unlikely to be able to allocate a buffer
sufficiently big to overflow here.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
[bwh: Backported to 3.2: formatted length is tot_len]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 61cddc57dc14a5dffa0921d9a24fd68edbb374ac upstream.

Currently registers with a value of 0 are ignored when initializing the register
defaults from raw defaults. This worked in the past, because registers without a
explicit default were assumed to have a default value of 0. This was changed in
commit b03622a8 ("regmap: Ensure rbtree syncs registers set to zero properly").
As a result registers, which have a raw default value of 0 are now assumed to
have no default. This again can result in unnecessary writes when syncing the
cache. It will also result in unnecessary reads for e.g. the first update
operation. In the case where readback is not possible this will even let the
update operation fail, if the register has not been written to before.

So this patch removes the check. Instead it adds a check to ignore raw defaults
for registers which are volatile, since those registers are not cached.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Most of these files were implicitly getting EXPORT_SYMBOL via
device.h which was including module.h, but that path will be broken
soon.

[ with input from Stephen Rothwell <sfr@canb.auug.org.au> ]

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

* 'for-linus' of git://opensource.wolfsonmicro.com/regmap: (62 commits)
  mfd: Enable rbtree cache for wm831x devices
  regmap: Support some block operations on cached devices
  regmap: Allow caches for devices with no defaults
  regmap: Ensure rbtree syncs registers set to zero properly
  regmap: Allow rbtree to cache zero default values
  regmap: Warn on raw I/O as well as bulk reads that bypass cache
  regmap: Return a sensible error code if we fail to read the cache
  regmap: Use bsearch() to search the register defaults
  regmap: Fix doc comment
  regmap: Optimize the lookup path to use binary search
  regmap: Ensure we scream if we enable cache bypass/only at the same time
  regmap: Implement regcache_cache_bypass helper function
  regmap: Save/restore the bypass state upon syncing
  regmap: Lock the sync path, ensure we use the lockless _regmap_write()
  regmap: Fix apostrophe usage
  regmap: Make _regmap_write() global
  regmap: Fix lock used for regcache_cache_only()
  regmap: Grab the lock in regcache_cache_only()
  regmap: Modify map->cache_bypass directly
  regmap: Fix regcache_sync generic implementation
  ...

Support raw reads if all the registers being read are volatile, the cache
will have no impact for tem.

Support bulk reads either directly (if all the registers are volatile) or
by falling back to iterating over single register reads otherwise.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

We only really need the defaults in order to cut down the number of
registers we sync and to satisfy reads while the device is powered off
but not all devices are going to need to do that (always on devices like
PMICs being the prime example) so don't require those devices to supply
a default.  Instead only try to fall back to hardware defaults if the
driver told us to.

Devices using LZO won't be able to instantiate with this, that will require
some updates in the LZO code to handle this case.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>