linux-toradex.git/drivers/base, branch v3.2.56

drivers/base/memory.c: fix show_mem_removable() to handle missing sections

2013-09-10T00:57:35+00:00

commit 21ea9f5ace3a7317cc3ba1fbc749758021a83136 upstream.

"cat /sys/devices/system/memory/memory*/removable" crashed the system.

The problem is that show_mem_removable() is passing a
bad pfn to is_mem_section_removable(), which causes

    if (!node_online(page_to_nid(page)))

to blow up.  Why is it passing in a bad pfn?

The reason is that show_mem_removable() will loop sections_per_block
times.  sections_per_block is 16, but mem->section_count is 8,
indicating holes in this memory block.  Checking that the memory section
is present before checking to see if the memory section is removable
fixes the problem.

   harp5-sys:~ # cat /sys/devices/system/memory/memory*/removable
   0
   1
   1
   1
   1
   1
   1
   1
   1
   1
   1
   1
   1
   1
   BUG: unable to handle kernel paging request at ffffea00c3200000
   IP: [] is_pageblock_removable_nolock+0x1/0x90
   PGD 83ffd4067 PUD 37bdfce067 PMD 0
   Oops: 0000 [#1] SMP
   Modules linked in: autofs4 binfmt_misc rdma_ucm rdma_cm iw_cm ib_addr ib_srp scsi_transport_srp scsi_tgt ib_ipoib ib_cm ib_uverbs ib_umad iw_cxgb3 cxgb3 mdio mlx4_en mlx4_ib ib_sa mlx4_core ib_mthca ib_mad ib_core fuse nls_iso8859_1 nls_cp437 vfat fat joydev loop hid_generic usbhid hid hwperf(O) numatools(O) dm_mod iTCO_wdt ipv6 iTCO_vendor_support igb i2c_i801 ioatdma i2c_algo_bit ehci_pci pcspkr lpc_ich i2c_core ehci_hcd ptp sg mfd_core dca rtc_cmos pps_core mperf button xhci_hcd sd_mod crc_t10dif usbcore usb_common scsi_dh_emc scsi_dh_hp_sw scsi_dh_alua scsi_dh_rdac scsi_dh gru(O) xvma(O) xfs crc32c libcrc32c thermal sata_nv processor piix mptsas mptscsih scsi_transport_sas mptbase megaraid_sas fan thermal_sys hwmon ext3 jbd ata_piix ahci libahci libata scsi_mod
   CPU: 4 PID: 5991 Comm: cat Tainted: G           O 3.11.0-rc5-rja-uv+ #10
   Hardware name: SGI UV2000/ROMLEY, BIOS SGI UV 2000/3000 series BIOS 01/15/2013
   task: ffff88081f034580 ti: ffff880820022000 task.ti: ffff880820022000
   RIP: 0010:[]  [] is_pageblock_removable_nolock+0x1/0x90
   RSP: 0018:ffff880820023df8  EFLAGS: 00010287
   RAX: 0000000000040000 RBX: ffffea00c3200000 RCX: 0000000000000004
   RDX: ffffea00c30b0000 RSI: 00000000001c0000 RDI: ffffea00c3200000
   RBP: ffff880820023e38 R08: 0000000000000000 R09: 0000000000000001
   R10: 0000000000000000 R11: 0000000000000001 R12: ffffea00c33c0000
   R13: 0000160000000000 R14: 6db6db6db6db6db7 R15: 0000000000000001
   FS:  00007ffff7fb2700(0000) GS:ffff88083fc80000(0000) knlGS:0000000000000000
   CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
   CR2: ffffea00c3200000 CR3: 000000081b954000 CR4: 00000000000407e0
   Call Trace:
     show_mem_removable+0x41/0x70
     dev_attr_show+0x2a/0x60
     sysfs_read_file+0xf7/0x1c0
     vfs_read+0xc8/0x130
     SyS_read+0x5d/0xa0
     system_call_fastpath+0x16/0x1b

Signed-off-by: Russ Anderson 
Cc: Greg Kroah-Hartman 
Cc: "Rafael J. Wysocki" 
Cc: Yinghai Lu 
Reviewed-by: Yasuaki Ishimatsu 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Ben Hutchings

Revert "PM / Domains: Fix handling of wakeup devices during system resume"

2013-09-10T00:57:29+00:00

This reverts commit 5c6156fac087f551cbd57499f4bed2fc614d70cd, which
was commit cc85b20780562d404e18a47b9b55b4a5102ae53e upstream.

It broke ARM && PM configurations by adding a call to
genpd_dev_active_wakeup() which was only added in Linux 3.3.

Signed-off-by: Ben Hutchings

Driver core: treat unregistered bus_types as having no devices

2013-03-06T03:23:48+00:00

commit 4fa3e78be7e985ca814ce2aa0c09cbee404efcf7 upstream.

A bus_type has a list of devices (klist_devices), but the list and the
subsys_private structure that contains it are not initialized until the
bus_type is registered with bus_register().

The panic/reboot path has fixups that look up devices in pci_bus_type.  If
we panic before registering pci_bus_type, the bus_type exists but the list
does not, so mach_reboot_fixups() trips over a null pointer and panics
again:

    mach_reboot_fixups
      pci_get_device
        ..
          bus_find_device(&pci_bus_type, ...)
            bus->p is NULL

Joonsoo reported a problem when panicking before PCI was initialized.
I think this patch should be sufficient to replace the patch he posted
here: https://lkml.org/lkml/2012/12/28/75 ("[PATCH] x86, reboot: skip
reboot_fixups in early boot phase")

Reported-by: Joonsoo Kim 
Signed-off-by: Bjorn Helgaas 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ben Hutchings

regmap: debugfs: Avoid overflows for very small reads

2013-01-03T03:33:32+00:00

commit db04328c167ff8e7c57f4a3532214aeada3a82fd upstream.

If count is less than the size of a register then we may hit integer
wraparound when trying to move backwards to check if we're still in
the buffer. Instead move the position forwards to check if it's still
in the buffer, we are unlikely to be able to allocate a buffer
sufficiently big to overflow here.

Signed-off-by: Mark Brown 
[bwh: Backported to 3.2: formatted length is tot_len]
Signed-off-by: Ben Hutchings

PM / Runtime: Clear power.deferred_resume on success in rpm_suspend()

2012-09-12T02:37:08+00:00

commit 58a34de7b1a920d287d17d2ca08bc9aaf7e6d35b upstream.

The power.deferred_resume can only be set if the runtime PM status
of device is RPM_SUSPENDING and it should be cleared after its
status has been changed, regardless of whether or not the runtime
suspend has been successful.  However, it only is cleared on
suspend failure, while it may remain set on successful suspend and
is happily leaked to rpm_resume() executed in that case.

That shouldn't happen, so if power.deferred_resume is set in
rpm_suspend() after the status has been changed to RPM_SUSPENDED,
clear it before calling rpm_resume().  Then, it doesn't need to be
cleared before changing the status to RPM_SUSPENDING any more,
because it's always cleared after the status has been changed to
either RPM_SUSPENDED (on success) or RPM_ACTIVE (on failure).

Signed-off-by: Rafael J. Wysocki 
Acked-by: Alan Stern 
Signed-off-by: Ben Hutchings

PM / Runtime: Fix rpm_resume() return value for power.no_callbacks set

2012-09-12T02:37:08+00:00

commit 7f321c26c04807834fef4c524d2b21573423fc74 upstream.

For devices whose power.no_callbacks flag is set, rpm_resume()
should return 1 if the device's parent is already active, so that
the callers of pm_runtime_get() don't think that they have to wait
for the device to resume (asynchronously) in that case (the core
won't queue up an asynchronous resume in that case, so there's
nothing to wait for anyway).

Modify the code accordingly (and make sure that an idle notification
will be queued up on success, even if 1 is to be returned).

Signed-off-by: Rafael J. Wysocki 
Acked-by: Alan Stern 
Signed-off-by: Ben Hutchings

PM / Sleep: Prevent waiting forever on asynchronous suspend after abort

2012-07-04T04:44:27+00:00

commit 1f758b23177d588a71b96ad02990e715949bb82f upstream.

__device_suspend() must always send a completion. Otherwise, parent
devices will wait forever.

Commit 1e2ef05b, "PM: Limit race conditions between runtime PM and
system sleep (v2)", introduced a regression by short-circuiting the
complete_all() for certain error cases.

This patch fixes the bug by always signalling a completion.

Addresses http://crosbug.com/31972

Tested by injecting an abort.

Signed-off-by: Mandeep Singh Baines 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Ben Hutchings

PM / Domains: Fix handling of wakeup devices during system resume

2012-04-02T16:52:37+00:00

commit cc85b20780562d404e18a47b9b55b4a5102ae53e upstream.

During system suspend pm_genpd_suspend_noirq() checks if the given
device is in a wakeup path (i.e. it appears to be needed for one or
more wakeup devices to work or is a wakeup device itself) and if it
needs to be "active" for wakeup to work.  If that is the case, the
function returns 0 without incrementing the device domain's counter
of suspended devices and without executing genpd_stop_dev() for the
device.  In consequence, the device is not stopped (e.g. its clock
isn't disabled) and power is always supplied to its domain in the
resulting system sleep state.

However, pm_genpd_resume_noirq() doesn't repeat that check and it
runs genpd_start_dev() and decrements the domain's counter of
suspended devices even for the wakeup device that weren't stopped by
pm_genpd_suspend_noirq().  As a result, the start callback may be run
unnecessarily for them and their domains' counters of suspended
devices may become negative.  Both outcomes aren't desirable, so fix
pm_genpd_resume_noirq() to look for wakeup devices that might not be
stopped by during system suspend.

Signed-off-by: Rafael J. Wysocki 
Tested-by: Simon Horman 
Signed-off-by: Greg Kroah-Hartman

regmap: Fix cache defaults initialization from raw cache defaults

2012-03-01T00:30:52+00:00

commit 61cddc57dc14a5dffa0921d9a24fd68edbb374ac upstream.

Currently registers with a value of 0 are ignored when initializing the register
defaults from raw defaults. This worked in the past, because registers without a
explicit default were assumed to have a default value of 0. This was changed in
commit b03622a8 ("regmap: Ensure rbtree syncs registers set to zero properly").
As a result registers, which have a raw default value of 0 are now assumed to
have no default. This again can result in unnecessary writes when syncing the
cache. It will also result in unnecessary reads for e.g. the first update
operation. In the case where readback is not possible this will even let the
update operation fail, if the register has not been written to before.

So this patch removes the check. Instead it adds a check to ignore raw defaults
for registers which are volatile, since those registers are not cached.

Signed-off-by: Lars-Peter Clausen 
Signed-off-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

firmware: Fix an oops on reading fw_priv->fw in sysfs loading file

2012-01-12T19:29:17+00:00

commit eea915bb0d1358755f151eaefb8208a2d5f3e10c upstream.

This oops was reported recently:
firmware_loading_store+0xf9/0x17b
dev_attr_store+0x20/0x22
sysfs_write_file+0x101/0x134
vfs_write+0xac/0xf3
sys_write+0x4a/0x6e
system_call_fastpath+0x16/0x1b

The complete backtrace was unfortunately not captured, but details can be found
here:
https://bugzilla.redhat.com/show_bug.cgi?id=769920

The cause is fairly clear.

Its caused by the fact that firmware_loading_store has a case 0 in its
switch statement that reads and writes the fw_priv->fw poniter without the
protection of the fw_lock mutex.  since there is a window between the time that
_request_firmware sets fw_priv->fw to NULL and the time the corresponding sysfs
file is unregistered, its possible for a user space application to race in, and
write a zero to the loading file, causing a NULL dereference in
firmware_loading_store.  Fix it by extending the protection of the fw_lock mutex
to cover all of the firware_loading_store function.

Signed-off-by: Neil Horman 
Signed-off-by: Greg Kroah-Hartman