Commits 1d5fcfec22 (PM / Domains: Add device domain data reference
counter) and 62d4490294 (PM / Domains: Allow device callbacks to be
added at any time) added checks for the return value of
dev_pm_get_subsys_data(), but those checks were incorrect, because
that function returned 1 on success in some cases.

Since all of the existing users of dev_pm_get_subsys_data() don't use
the positive value returned by it on success, change its definition
so that it always returns 0 when successful.

Reported-by: Heiko Stübner <heiko@sntech.de>
Reported-by: Tushar Behera <tushar.behera@linaro.org>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

Pull second vfs pile from Al Viro:
 "The stuff in there: fsfreeze deadlock fixes by Jan (essentially, the
  deadlock reproduced by xfstests 068), symlink and hardlink restriction
  patches, plus assorted cleanups and fixes.

  Note that another fsfreeze deadlock (emergency thaw one) is *not*
  dealt with - the series by Fernando conflicts a lot with Jan's, breaks
  userland ABI (FIFREEZE semantics gets changed) and trades the deadlock
  for massive vfsmount leak; this is going to be handled next cycle.
  There probably will be another pull request, but that stuff won't be
  in it."

Fix up trivial conflicts due to unrelated changes next to each other in
drivers/{staging/gdm72xx/usb_boot.c, usb/gadget/storage_common.c}

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (54 commits)
  delousing target_core_file a bit
  Documentation: Correct s_umount state for freeze_fs/unfreeze_fs
  fs: Remove old freezing mechanism
  ext2: Implement freezing
  btrfs: Convert to new freezing mechanism
  nilfs2: Convert to new freezing mechanism
  ntfs: Convert to new freezing mechanism
  fuse: Convert to new freezing mechanism
  gfs2: Convert to new freezing mechanism
  ocfs2: Convert to new freezing mechanism
  xfs: Convert to new freezing code
  ext4: Convert to new freezing mechanism
  fs: Protect write paths by sb_start_write - sb_end_write
  fs: Skip atime update on frozen filesystem
  fs: Add freezing handling to mnt_want_write() / mnt_drop_write()
  fs: Improve filesystem freezing handling
  switch the protection of percpu_counter list to spinlock
  nfsd: Push mnt_want_write() outside of i_mutex
  btrfs: Push mnt_want_write() outside of i_mutex
  fat: Push mnt_want_write() outside of i_mutex
  ...

mm/page_alloc.c has some memory isolation functions but they are used only
when we enable CONFIG_{CMA|MEMORY_HOTPLUG|MEMORY_FAILURE}.  So let's make
it configurable by new CONFIG_MEMORY_ISOLATION so that it can reduce
binary size and we can check it simple by CONFIG_MEMORY_ISOLATION, not if
defined CONFIG_{CMA|MEMORY_HOTPLUG|MEMORY_FAILURE}.

Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull DMA-mapping updates from Marek Szyprowski:
 "Those patches are continuation of my earlier work.

  They contains extensions to DMA-mapping framework to remove limitation
  of the current ARM implementation (like limited total size of DMA
  coherent/write combine buffers), improve performance of buffer sharing
  between devices (attributes to skip cpu cache operations or creation
  of additional kernel mapping for some specific use cases) as well as
  some unification of the common code for dma_mmap_attrs() and
  dma_mmap_coherent() functions.  All extensions have been implemented
  and tested for ARM architecture."

* 'for-linus-for-3.6-rc1' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
  ARM: dma-mapping: add support for DMA_ATTR_SKIP_CPU_SYNC attribute
  common: DMA-mapping: add DMA_ATTR_SKIP_CPU_SYNC attribute
  ARM: dma-mapping: add support for dma_get_sgtable()
  common: dma-mapping: introduce dma_get_sgtable() function
  ARM: dma-mapping: add support for DMA_ATTR_NO_KERNEL_MAPPING attribute
  common: DMA-mapping: add DMA_ATTR_NO_KERNEL_MAPPING attribute
  common: dma-mapping: add support for generic dma_mmap_* calls
  ARM: dma-mapping: fix error path for memory allocation failure
  ARM: dma-mapping: add more sanity checks in arm_dma_mmap()
  ARM: dma-mapping: remove custom consistent dma region
  mm: vmalloc: use const void * for caller argument
  scatterlist: add sg_alloc_table_from_pages function

This patch adds dma_get_sgtable() function which is required to let
drivers to share the buffers allocated by DMA-mapping subsystem. Right
now the driver gets a dma address of the allocated buffer and the kernel
virtual mapping for it. If it wants to share it with other device (= map
into its dma address space) it usually hacks around kernel virtual
addresses to get pointers to pages or assumes that both devices share
the DMA address space. Both solutions are just hacks for the special
cases, which should be avoided in the final version of buffer sharing.

To solve this issue in a generic way, a new call to DMA mapping has been
introduced - dma_get_sgtable(). It allocates a scatter-list which
describes the allocated buffer and lets the driver(s) to use it with
other device(s) by calling dma_map_sg() on it.

This patch provides a generic implementation based on virt_to_page()
call. Architectures which require more sophisticated translation might
provide their own get_sgtable() methods.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Commit 9adc5374 ('common: dma-mapping: introduce mmap method') added a
generic method for implementing mmap user call to dma_map_ops structure.

This patch converts ARM and PowerPC architectures (the only providers of
dma_mmap_coherent/dma_mmap_writecombine calls) to use this generic
dma_map_ops based call and adds a generic cross architecture
definition for dma_mmap_attrs, dma_mmap_coherent, dma_mmap_writecombine
functions.

The generic mmap virt_to_page-based fallback implementation is provided for
architectures which don't provide their own implementation for mmap method.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com>

releases what needs to be released after {kern,user}_path_create()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull driver core changes from Greg Kroah-Hartman:
 "Here's the big driver core pull request for 3.6-rc1.

  Unlike 3.5, this kernel should be a lot tamer, with the printk changes
  now settled down.  All we have here is some extcon driver updates, w1
  driver updates, a few printk cleanups that weren't needed for 3.5, but
  are good to have now, and some other minor fixes/changes in the driver
  core.

  All of these have been in the linux-next releases for a while now.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'driver-core-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (38 commits)
  printk: Export struct log size and member offsets through vmcoreinfo
  Drivers: hv: Change the hex constant to a decimal constant
  driver core: don't trigger uevent after failure
  extcon: MAX77693: Add extcon-max77693 driver to support Maxim MAX77693 MUIC device
  sysfs: fail dentry revalidation after namespace change fix
  sysfs: fail dentry revalidation after namespace change
  extcon: spelling of detach in function doc
  extcon: arizona: Stop microphone detection if we give up on it
  extcon: arizona: Update cable reporting calls and split headset
  PM / Runtime: Do not increment device usage counts before probing
  kmsg - do not flush partial lines when the console is busy
  kmsg - export "continuation record" flag to /dev/kmsg
  kmsg - avoid warning for CONFIG_PRINTK=n compilations
  kmsg - properly print over-long continuation lines
  driver-core: Use kobj_to_dev instead of re-implementing it
  driver-core: Move kobj_to_dev from genhd.h to device.h
  driver core: Move deferred devices to the end of dpm_list before probing
  driver core: move uevent call to driver_register
  driver core: fix shutdown races with probe/remove(v3)
  Extcon: Arizona: Add driver for Wolfson Arizona class devices
  ...

Pull first round of SCSI updates from James Bottomley:
 "The most important feature of this patch set is the new async
  infrastructure that makes sure async_synchronize_full() synchronizes
  all domains and allows us to remove all the hacks (like having
  scsi_complete_async_scans() in the device base code) and means that
  the async infrastructure will "just work" in future.

  The rest is assorted driver updates (aacraid, bnx2fc, virto-scsi,
  megaraid, bfa, lpfc, qla2xxx, qla4xxx) plus a lot of infrastructure
  work in sas and FC.

  Signed-off-by: James Bottomley <JBottomley@Parallels.com>"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (97 commits)
  [SCSI] Revert "[SCSI] fix async probe regression"
  [SCSI] cleanup usages of scsi_complete_async_scans
  [SCSI] queue async scan work to an async_schedule domain
  [SCSI] async: make async_synchronize_full() flush all work regardless of domain
  [SCSI] async: introduce 'async_domain' type
  [SCSI] bfa: Fix to set correct return error codes and misc cleanup.
  [SCSI] aacraid: Series 7 Async. (performance) mode support
  [SCSI] aha152x: Allow use on 64bit systems
  [SCSI] virtio-scsi: Add vdrv->scan for post VIRTIO_CONFIG_S_DRIVER_OK LUN scanning
  [SCSI] bfa: squelch lockdep complaint with a spin_lock_init
  [SCSI] qla2xxx: remove unnecessary reads of PCI_CAP_ID_EXP
  [SCSI] qla4xxx: remove unnecessary read of PCI_CAP_ID_EXP
  [SCSI] ufs: fix incorrect return value about SUCCESS and FAILED
  [SCSI] ufs: reverse the ufshcd_is_device_present logic
  [SCSI] ufs: use module_pci_driver
  [SCSI] usb-storage: update usb devices for write cache quirk in quirk list.
  [SCSI] usb-storage: add support for write cache quirk
  [SCSI] set to WCE if usb cache quirk is present.
  [SCSI] virtio-scsi: hotplug support for virtio-scsi
  [SCSI] virtio-scsi: split scatterlist per target
  ...

Pull the big VFS changes from Al Viro:
 "This one is *big* and changes quite a few things around VFS.  What's in there:

   - the first of two really major architecture changes - death to open
     intents.

     The former is finally there; it was very long in making, but with
     Miklos getting through really hard and messy final push in
     fs/namei.c, we finally have it.  Unlike his variant, this one
     doesn't introduce struct opendata; what we have instead is
     ->atomic_open() taking preallocated struct file * and passing
     everything via its fields.

     Instead of returning struct file *, it returns -E...  on error, 0
     on success and 1 in "deal with it yourself" case (e.g.  symlink
     found on server, etc.).

     See comments before fs/namei.c:atomic_open().  That made a lot of
     goodies finally possible and quite a few are in that pile:
     ->lookup(), ->d_revalidate() and ->create() do not get struct
     nameidata * anymore; ->lookup() and ->d_revalidate() get lookup
     flags instead, ->create() gets "do we want it exclusive" flag.

     With the introduction of new helper (kern_path_locked()) we are rid
     of all struct nameidata instances outside of fs/namei.c; it's still
     visible in namei.h, but not for long.  Come the next cycle,
     declaration will move either to fs/internal.h or to fs/namei.c
     itself.  [me, miklos, hch]

   - The second major change: behaviour of final fput().  Now we have
     __fput() done without any locks held by caller *and* not from deep
     in call stack.

     That obviously lifts a lot of constraints on the locking in there.
     Moreover, it's legal now to call fput() from atomic contexts (which
     has immediately simplified life for aio.c).  We also don't need
     anti-recursion logics in __scm_destroy() anymore.

     There is a price, though - the damn thing has become partially
     asynchronous.  For fput() from normal process we are guaranteed
     that pending __fput() will be done before the caller returns to
     userland, exits or gets stopped for ptrace.

     For kernel threads and atomic contexts it's done via
     schedule_work(), so theoretically we might need a way to make sure
     it's finished; so far only one such place had been found, but there
     might be more.

     There's flush_delayed_fput() (do all pending __fput()) and there's
     __fput_sync() (fput() analog doing __fput() immediately).  I hope
     we won't need them often; see warnings in fs/file_table.c for
     details.  [me, based on task_work series from Oleg merged last
     cycle]

   - sync series from Jan

   - large part of "death to sync_supers()" work from Artem; the only
     bits missing here are exofs and ext4 ones.  As far as I understand,
     those are going via the exofs and ext4 trees resp.; once they are
     in, we can put ->write_super() to the rest, along with the thread
     calling it.

   - preparatory bits from unionmount series (from dhowells).

   - assorted cleanups and fixes all over the place, as usual.

  This is not the last pile for this cycle; there's at least jlayton's
  ESTALE work and fsfreeze series (the latter - in dire need of fixes,
  so I'm not sure it'll make the cut this cycle).  I'll probably throw
  symlink/hardlink restrictions stuff from Kees into the next pile, too.
  Plus there's a lot of misc patches I hadn't thrown into that one -
  it's large enough as it is..."

* 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (127 commits)
  ext4: switch EXT4_IOC_RESIZE_FS to mnt_want_write_file()
  btrfs: switch btrfs_ioctl_balance() to mnt_want_write_file()
  switch dentry_open() to struct path, make it grab references itself
  spufs: shift dget/mntget towards dentry_open()
  zoran: don't bother with struct file * in zoran_map
  ecryptfs: don't reinvent the wheels, please - use struct completion
  don't expose I_NEW inodes via dentry->d_inode
  tidy up namei.c a bit
  unobfuscate follow_up() a bit
  ext3: pass custom EOF to generic_file_llseek_size()
  ext4: use core vfs llseek code for dir seeks
  vfs: allow custom EOF in generic_file_llseek code
  vfs: Avoid unnecessary WB_SYNC_NONE writeback during sys_sync and reorder sync passes
  vfs: Remove unnecessary flushing of block devices
  vfs: Make sys_sync writeout also block device inodes
  vfs: Create function for iterating over block devices
  vfs: Reorder operations during sys_sync
  quota: Move quota syncing to ->sync_fs method
  quota: Split dquot_quota_sync() to writeback and cache flushing part
  vfs: Move noop_backing_dev_info check from sync into writeback
  ...