linux-toradex.git/drivers/bcma/driver_mips.c, branch v3.7 Linux kernel for Apalis and Colibri modules bcma: fix regression in interrupt assignment on mips 2012-07-26T19:37:57+00:00 Hauke Mehrtens hauke@hauke-m.de 2012-07-26T15:44:12+00:00 d8f1bd2ffcce6af1ace4f1efb327765144aa0755 The wrong interrupts where assigned to the cores in bcma_core_mips_init(). This caused at least my serial console not to response to any input. This was caused by this patch which changed the order of the cores in the list: commit c334e25c9f3a95f2bd6b79fedc5170f17245b1c7 Author: Rafał Miłecki <zajec5@gmail.com> Date: Wed Jul 11 12:37:00 2012 +0200 bcma: add new cores at the end of list This should be fixed properly later so that the correct interrupt numbers are assigned to the cores independently from the ordering of the list. This patch restores the old behavior again. I will look into the problem more deeply later. I also changed the order of the list with the cores and their assigned interrupt number which gets printed to the log. Now they are printed in the same order like all the other lists of cores and like it was done before the patch which changed the order. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com> 
The wrong interrupts where assigned to the cores in
bcma_core_mips_init(). This caused at least my serial console not to
response to any input.

This was caused by this patch which changed the order of the cores in
the list:
commit c334e25c9f3a95f2bd6b79fedc5170f17245b1c7
Author: Rafał Miłecki <zajec5@gmail.com>
Date:   Wed Jul 11 12:37:00 2012 +0200

    bcma: add new cores at the end of list

This should be fixed properly later so that the correct interrupt
numbers are assigned to the cores independently from the ordering of
the list. This patch restores the old behavior again. I will look into
the problem more deeply later.

I also changed the order of the list with the cores and their assigned
interrupt number which gets printed to the log. Now they are printed in
the same order like all the other lists of cores and like it was done
before the patch which changed the order.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
bcma: add place for flash memory support 2012-07-17T19:11:40+00:00 Rafał Miłecki zajec5@gmail.com 2012-07-17T14:26:41+00:00 23cb3b2121323443834296a8ecb582b8aeb78d75 Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
bcma: use custom printing functions 2012-07-09T20:36:36+00:00 Rafał Miłecki zajec5@gmail.com 2012-07-05T20:07:32+00:00 3d9d8af330a891f141db420115238f01e4c6ece7 Having bus number printed makes it much easier to anaylze logs on systems with more buses. For example Netgear WNDR4500 has 3 AMBA buses in total, which makes standard log really messy. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> 
Having bus number printed makes it much easier to anaylze logs on
systems with more buses. For example Netgear WNDR4500 has 3 AMBA buses
in total, which makes standard log really messy.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
bcma: add constants for chip ids 2012-07-09T20:36:03+00:00 Hauke Mehrtens hauke@hauke-m.de 2012-06-29T23:44:38+00:00 4b4f5be2e49a604de11dee0ee9b3f151de061724 The chip IDs are used all over bcma and no constants where defined. This patch adds the constants and makes bcma use them. Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com> 
The chip IDs are used all over bcma and no constants where defined.
This patch adds the constants and makes bcma use them.

Acked-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
bcma: get CPU clock 2011-08-08T18:29:29+00:00 Hauke Mehrtens hauke@hauke-m.de 2011-07-22T23:20:11+00:00 908debc8da0d5a91418f71c6a462f62bd2ac69ef Add method to return the clock of the CPU. This is needed by the arch code to calculate the mips_hpt_frequency. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> 
Add method to return the clock of the CPU. This is needed by the arch
code to calculate the mips_hpt_frequency.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
bcma: add serial console support 2011-08-08T18:29:28+00:00 Hauke Mehrtens hauke@hauke-m.de 2011-07-22T23:20:10+00:00 e3afe0e5be7576ac1282ea9fbbc9b352bb379227 This adds support for serial console to bcma, when operating on an SoC. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> 
This adds support for serial console to bcma, when operating on an SoC.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
bcma: add mips driver 2011-08-08T18:29:26+00:00 Hauke Mehrtens hauke@hauke-m.de 2011-07-22T23:20:09+00:00 21e0534ad7415559bb8dee0dc00e39646fed83c9 This adds a mips driver to bcma. This is only found on embedded devices. For now the driver just initializes the irqs used on this system. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> 
This adds a mips driver to bcma. This is only found on embedded
devices. For now the driver just initializes the irqs used on this
system.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>