linux-toradex.git/drivers/bcma/host_pci.c, branch v4.1.25

bcma: move PCI IRQ control function to host specific code

2015-03-13T14:25:50+00:00

This function isn't really related to any bus core. It touches PCI
device config registers only, so move it to the (PCI) host file.

Signed-off-by: Rafał Miłecki 
Signed-off-by: Kalle Valo

bcma: enable support for PCIe Gen 2 host devices

2015-03-02T14:59:45+00:00

Signed-off-by: Rafał Miłecki 
Signed-off-by: Kalle Valo

bcma: support bringing up bus hosted on PCIe Gen 2

2015-03-02T14:59:45+00:00

Signed-off-by: Rafał Miłecki 
Signed-off-by: Kalle Valo

bcma: add helpers bringing PCIe hosted bus up / down

2015-03-02T14:59:45+00:00

Bringing PCIe hosted bus up requires operating on host-related core.
Since we plan to support PCIe Gen 2 devices we should provide a helper
picking the correct one (PCIE or PCIE2).

Signed-off-by: Rafał Miłecki 
Signed-off-by: Kalle Valo

bcma: implement host code support for PCIe Gen 2 devices

2015-01-29T08:54:43+00:00

This is stil incomplete, so we don't add PCI IDs of new devices yet.
Purpose of this patch is to allow testing & adjusting rest of the code.

Signed-off-by: Rafał Miłecki 
Signed-off-by: Kalle Valo

bcma: add another PCI ID of device with BCM43228

2014-10-23T18:02:06+00:00

It was found attached to the BCM47081A0 SoC. Log:
bcma: bus0: Found chip with id 43228, rev 0x00 and package 0x08

Signed-off-by: Rafał Miłecki 
Signed-off-by: John W. Linville

bcma: move bus struct setup into early part of host specific code

2014-09-09T19:27:18+00:00

This change is important for SoC host. In future we will want to know
chip ID (needed for early MIPS boot) before doing cores scanning.

Signed-off-by: Rafał Miłecki 
Acked-by: Hauke Mehrtens 
Signed-off-by: John W. Linville

bcma: add PCI ID for spromless BCM43217

2014-08-25T19:39:23+00:00

This adds the PCI ID a BCM43217 without a sprom.
This devices was found on a Netgear R6250 attached to a BCM4708 ARM SoC.

bcma: bus1: Found chip with id 0xA8D1, rev 0x00 and package 0x08
bcma: bus1: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x27, class 0x0)
bcma: bus1: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1E, class 0x0)
bcma: bus1: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x14, class 0x0)

b43-phy0: Broadcom 43217 WLAN found (core revision 30)
b43-phy0: Found PHY: Analog 9, Type 4 (N), Revision 17
b43-phy0: Found Radio: Manuf 0x17F, ID 0x2057, Revision 14, Version 1

Signed-off-by: Hauke Mehrtens 
Signed-off-by: John W. Linville

bcma: add support for BCM43131 that was found in Tenda W311E

2014-07-29T14:32:57+00:00

Signed-off-by: Rafał Miłecki 
Signed-off-by: John W. Linville

bcma: add support for BCM43217 found in Tenda W322E (14e4:43a9)

2014-07-18T17:45:24+00:00

Signed-off-by: Rafał Miłecki 
Signed-off-by: John W. Linville