linux-toradex.git/drivers/block/brd.c, branch v6.3-rc5 Linux kernel for Apalis and Colibri modules Merge tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm 2023-02-24T01:09:35+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-02-24T01:09:35+00:00 3822a7c40997dc86b1458766a3f146d62393f084 Pull MM updates from Andrew Morton: - Daniel Verkamp has contributed a memfd series ("mm/memfd: add F_SEAL_EXEC") which permits the setting of the memfd execute bit at memfd creation time, with the option of sealing the state of the X bit. - Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset() thread-safe for pmd unshare") which addresses a rare race condition related to PMD unsharing. - Several folioification patch serieses from Matthew Wilcox, Vishal Moola, Sidhartha Kumar and Lorenzo Stoakes - Johannes Weiner has a series ("mm: push down lock_page_memcg()") which does perform some memcg maintenance and cleanup work. - SeongJae Park has added DAMOS filtering to DAMON, with the series "mm/damon/core: implement damos filter". These filters provide users with finer-grained control over DAMOS's actions. SeongJae has also done some DAMON cleanup work. - Kairui Song adds a series ("Clean up and fixes for swap"). - Vernon Yang contributed the series "Clean up and refinement for maple tree". - Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It adds to MGLRU an LRU of memcgs, to improve the scalability of global reclaim. - David Hildenbrand has added some userfaultfd cleanup work in the series "mm: uffd-wp + change_protection() cleanups". - Christoph Hellwig has removed the generic_writepages() library function in the series "remove generic_writepages". - Baolin Wang has performed some maintenance on the compaction code in his series "Some small improvements for compaction". - Sidhartha Kumar is doing some maintenance work on struct page in his series "Get rid of tail page fields". - David Hildenbrand contributed some cleanup, bugfixing and generalization of pte management and of pte debugging in his series "mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with swap PTEs". - Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation flag in the series "Discard __GFP_ATOMIC". - Sergey Senozhatsky has improved zsmalloc's memory utilization with his series "zsmalloc: make zspage chain size configurable". - Joey Gouly has added prctl() support for prohibiting the creation of writeable+executable mappings. The previous BPF-based approach had shortcomings. See "mm: In-kernel support for memory-deny-write-execute (MDWE)". - Waiman Long did some kmemleak cleanup and bugfixing in the series "mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF". - T.J. Alumbaugh has contributed some MGLRU cleanup work in his series "mm: multi-gen LRU: improve". - Jiaqi Yan has provided some enhancements to our memory error statistics reporting, mainly by presenting the statistics on a per-node basis. See the series "Introduce per NUMA node memory error statistics". - Mel Gorman has a second and hopefully final shot at fixing a CPU-hog regression in compaction via his series "Fix excessive CPU usage during compaction". - Christoph Hellwig does some vmalloc maintenance work in the series "cleanup vfree and vunmap". - Christoph Hellwig has removed block_device_operations.rw_page() in ths series "remove ->rw_page". - We get some maple_tree improvements and cleanups in Liam Howlett's series "VMA tree type safety and remove __vma_adjust()". - Suren Baghdasaryan has done some work on the maintainability of our vm_flags handling in the series "introduce vm_flags modifier functions". - Some pagemap cleanup and generalization work in Mike Rapoport's series "mm, arch: add generic implementation of pfn_valid() for FLATMEM" and "fixups for generic implementation of pfn_valid()" - Baoquan He has done some work to make /proc/vmallocinfo and /proc/kcore better represent the real state of things in his series "mm/vmalloc.c: allow vread() to read out vm_map_ram areas". - Jason Gunthorpe rationalized the GUP system's interface to the rest of the kernel in the series "Simplify the external interface for GUP". - SeongJae Park wishes to migrate people from DAMON's debugfs interface over to its sysfs interface. To support this, we'll temporarily be printing warnings when people use the debugfs interface. See the series "mm/damon: deprecate DAMON debugfs interface". - Andrey Konovalov provided the accurately named "lib/stackdepot: fixes and clean-ups" series. - Huang Ying has provided a dramatic reduction in migration's TLB flush IPI rates with the series "migrate_pages(): batch TLB flushing". - Arnd Bergmann has some objtool fixups in "objtool warning fixes". * tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits) include/linux/migrate.h: remove unneeded externs mm/memory_hotplug: cleanup return value handing in do_migrate_range() mm/uffd: fix comment in handling pte markers mm: change to return bool for isolate_movable_page() mm: hugetlb: change to return bool for isolate_hugetlb() mm: change to return bool for isolate_lru_page() mm: change to return bool for folio_isolate_lru() objtool: add UACCESS exceptions for __tsan_volatile_read/write kmsan: disable ftrace in kmsan core code kasan: mark addr_has_metadata __always_inline mm: memcontrol: rename memcg_kmem_enabled() sh: initialize max_mapnr m68k/nommu: add missing definition of ARCH_PFN_OFFSET mm: percpu: fix incorrect size in pcpu_obj_full_size() maple_tree: reduce stack usage with gcc-9 and earlier mm: page_alloc: call panic() when memoryless node allocation fails mm: multi-gen LRU: avoid futile retries migrate_pages: move THP/hugetlb migration support check to simplify code migrate_pages: batch flushing TLB migrate_pages: share more code between _unmap and _move ... 
Pull MM updates from Andrew Morton:

 - Daniel Verkamp has contributed a memfd series ("mm/memfd: add
   F_SEAL_EXEC") which permits the setting of the memfd execute bit at
   memfd creation time, with the option of sealing the state of the X
   bit.

 - Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
   thread-safe for pmd unshare") which addresses a rare race condition
   related to PMD unsharing.

 - Several folioification patch serieses from Matthew Wilcox, Vishal
   Moola, Sidhartha Kumar and Lorenzo Stoakes

 - Johannes Weiner has a series ("mm: push down lock_page_memcg()")
   which does perform some memcg maintenance and cleanup work.

 - SeongJae Park has added DAMOS filtering to DAMON, with the series
   "mm/damon/core: implement damos filter".

   These filters provide users with finer-grained control over DAMOS's
   actions. SeongJae has also done some DAMON cleanup work.

 - Kairui Song adds a series ("Clean up and fixes for swap").

 - Vernon Yang contributed the series "Clean up and refinement for maple
   tree".

 - Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
   adds to MGLRU an LRU of memcgs, to improve the scalability of global
   reclaim.

 - David Hildenbrand has added some userfaultfd cleanup work in the
   series "mm: uffd-wp + change_protection() cleanups".

 - Christoph Hellwig has removed the generic_writepages() library
   function in the series "remove generic_writepages".

 - Baolin Wang has performed some maintenance on the compaction code in
   his series "Some small improvements for compaction".

 - Sidhartha Kumar is doing some maintenance work on struct page in his
   series "Get rid of tail page fields".

 - David Hildenbrand contributed some cleanup, bugfixing and
   generalization of pte management and of pte debugging in his series
   "mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with
   swap PTEs".

 - Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
   flag in the series "Discard __GFP_ATOMIC".

 - Sergey Senozhatsky has improved zsmalloc's memory utilization with
   his series "zsmalloc: make zspage chain size configurable".

 - Joey Gouly has added prctl() support for prohibiting the creation of
   writeable+executable mappings.

   The previous BPF-based approach had shortcomings. See "mm: In-kernel
   support for memory-deny-write-execute (MDWE)".

 - Waiman Long did some kmemleak cleanup and bugfixing in the series
   "mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".

 - T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
   "mm: multi-gen LRU: improve".

 - Jiaqi Yan has provided some enhancements to our memory error
   statistics reporting, mainly by presenting the statistics on a
   per-node basis. See the series "Introduce per NUMA node memory error
   statistics".

 - Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
   regression in compaction via his series "Fix excessive CPU usage
   during compaction".

 - Christoph Hellwig does some vmalloc maintenance work in the series
   "cleanup vfree and vunmap".

 - Christoph Hellwig has removed block_device_operations.rw_page() in
   ths series "remove ->rw_page".

 - We get some maple_tree improvements and cleanups in Liam Howlett's
   series "VMA tree type safety and remove __vma_adjust()".

 - Suren Baghdasaryan has done some work on the maintainability of our
   vm_flags handling in the series "introduce vm_flags modifier
   functions".

 - Some pagemap cleanup and generalization work in Mike Rapoport's
   series "mm, arch: add generic implementation of pfn_valid() for
   FLATMEM" and "fixups for generic implementation of pfn_valid()"

 - Baoquan He has done some work to make /proc/vmallocinfo and
   /proc/kcore better represent the real state of things in his series
   "mm/vmalloc.c: allow vread() to read out vm_map_ram areas".

 - Jason Gunthorpe rationalized the GUP system's interface to the rest
   of the kernel in the series "Simplify the external interface for
   GUP".

 - SeongJae Park wishes to migrate people from DAMON's debugfs interface
   over to its sysfs interface. To support this, we'll temporarily be
   printing warnings when people use the debugfs interface. See the
   series "mm/damon: deprecate DAMON debugfs interface".

 - Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
   and clean-ups" series.

 - Huang Ying has provided a dramatic reduction in migration's TLB flush
   IPI rates with the series "migrate_pages(): batch TLB flushing".

 - Arnd Bergmann has some objtool fixups in "objtool warning fixes".

* tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits)
  include/linux/migrate.h: remove unneeded externs
  mm/memory_hotplug: cleanup return value handing in do_migrate_range()
  mm/uffd: fix comment in handling pte markers
  mm: change to return bool for isolate_movable_page()
  mm: hugetlb: change to return bool for isolate_hugetlb()
  mm: change to return bool for isolate_lru_page()
  mm: change to return bool for folio_isolate_lru()
  objtool: add UACCESS exceptions for __tsan_volatile_read/write
  kmsan: disable ftrace in kmsan core code
  kasan: mark addr_has_metadata __always_inline
  mm: memcontrol: rename memcg_kmem_enabled()
  sh: initialize max_mapnr
  m68k/nommu: add missing definition of ARCH_PFN_OFFSET
  mm: percpu: fix incorrect size in pcpu_obj_full_size()
  maple_tree: reduce stack usage with gcc-9 and earlier
  mm: page_alloc: call panic() when memoryless node allocation fails
  mm: multi-gen LRU: avoid futile retries
  migrate_pages: move THP/hugetlb migration support check to simplify code
  migrate_pages: batch flushing TLB
  migrate_pages: share more code between _unmap and _move
  ...
brd: use radix_tree_maybe_preload instead of radix_tree_preload 2023-02-17T13:15:53+00:00 Pankaj Raghav p.raghav@samsung.com 2023-02-17T12:14:44+00:00 0aa2988e4fd23c0c8b33999d7b47dfbc5e6bf24b Unconditionally calling radix_tree_preload_end() results in a OOPS message as the preload is only conditionally called for gfpflags_allow_blocking(). [ 20.267323] BUG: using smp_processor_id() in preemptible [00000000] code: fio/416 [ 20.267837] caller is brd_insert_page.part.0+0xbe/0x190 [brd] [ 20.269436] Call Trace: [ 20.269598] <TASK> [ 20.269742] dump_stack_lvl+0x32/0x50 [ 20.269982] check_preemption_disabled+0xd1/0xe0 [ 20.270289] brd_insert_page.part.0+0xbe/0x190 [brd] [ 20.270664] brd_submit_bio+0x33f/0xf40 [brd] Use radix_tree_maybe_preload() which does preload only if gfpflags_allow_blocking() is true but also takes the lock. Therefore, unconditionally calling radix_tree_preload_end() should not create any issues and the message disappears. Fixes: 6ded703c56c2 ("brd: check for REQ_NOWAIT and set correct page allocation mask") Signed-off-by: Pankaj Raghav <p.raghav@samsung.com> Link: https://lore.kernel.org/r/20230217121442.33914-1-p.raghav@samsung.com Signed-off-by: Jens Axboe <axboe@kernel.dk> 
Unconditionally calling radix_tree_preload_end() results in a OOPS
message as the preload is only conditionally called for
gfpflags_allow_blocking().

[   20.267323] BUG: using smp_processor_id() in preemptible [00000000] code: fio/416
[   20.267837] caller is brd_insert_page.part.0+0xbe/0x190 [brd]
[   20.269436] Call Trace:
[   20.269598]  <TASK>
[   20.269742]  dump_stack_lvl+0x32/0x50
[   20.269982]  check_preemption_disabled+0xd1/0xe0
[   20.270289]  brd_insert_page.part.0+0xbe/0x190 [brd]
[   20.270664]  brd_submit_bio+0x33f/0xf40 [brd]

Use radix_tree_maybe_preload() which does preload only if
gfpflags_allow_blocking() is true but also takes the lock. Therefore,
unconditionally calling radix_tree_preload_end() should not create any
issues and the message disappears.

Fixes: 6ded703c56c2 ("brd: check for REQ_NOWAIT and set correct page allocation mask")
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Link: https://lore.kernel.org/r/20230217121442.33914-1-p.raghav@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
brd: mark as nowait compatible 2023-02-16T17:02:55+00:00 Jens Axboe axboe@kernel.dk 2023-02-15T23:43:47+00:00 67205f80be9910207481406c47f7d85e703fb2e9 By default, non-mq drivers do not support nowait. This causes io_uring to use a slower path as the driver cannot be trust not to block. brd can safely set the nowait flag, as worst case all it does is a NOIO allocation. For io_uring, this makes a substantial difference. Before: submitter=0, tid=453, file=/dev/ram0, node=-1 polled=0, fixedbufs=1/0, register_files=1, buffered=0, QD=128 Engine=io_uring, sq_ring=128, cq_ring=128 IOPS=440.03K, BW=1718MiB/s, IOS/call=32/31 IOPS=428.96K, BW=1675MiB/s, IOS/call=32/32 IOPS=442.59K, BW=1728MiB/s, IOS/call=32/31 IOPS=419.65K, BW=1639MiB/s, IOS/call=32/32 IOPS=426.82K, BW=1667MiB/s, IOS/call=32/31 and after: submitter=0, tid=354, file=/dev/ram0, node=-1 polled=0, fixedbufs=1/0, register_files=1, buffered=0, QD=128 Engine=io_uring, sq_ring=128, cq_ring=128 IOPS=3.37M, BW=13.15GiB/s, IOS/call=32/31 IOPS=3.45M, BW=13.46GiB/s, IOS/call=32/31 IOPS=3.43M, BW=13.42GiB/s, IOS/call=32/32 IOPS=3.43M, BW=13.39GiB/s, IOS/call=32/31 IOPS=3.43M, BW=13.38GiB/s, IOS/call=32/31 or about an 8x in difference. Now that brd is prepared to deal with REQ_NOWAIT reads/writes, mark it as supporting that. Cc: stable@vger.kernel.org # 5.10+ Link: https://lore.kernel.org/linux-block/20230203103005.31290-1-p.raghav@samsung.com/ Signed-off-by: Jens Axboe <axboe@kernel.dk> 
By default, non-mq drivers do not support nowait. This causes io_uring
to use a slower path as the driver cannot be trust not to block. brd
can safely set the nowait flag, as worst case all it does is a NOIO
allocation.

For io_uring, this makes a substantial difference. Before:

submitter=0, tid=453, file=/dev/ram0, node=-1
polled=0, fixedbufs=1/0, register_files=1, buffered=0, QD=128
Engine=io_uring, sq_ring=128, cq_ring=128
IOPS=440.03K, BW=1718MiB/s, IOS/call=32/31
IOPS=428.96K, BW=1675MiB/s, IOS/call=32/32
IOPS=442.59K, BW=1728MiB/s, IOS/call=32/31
IOPS=419.65K, BW=1639MiB/s, IOS/call=32/32
IOPS=426.82K, BW=1667MiB/s, IOS/call=32/31

and after:

submitter=0, tid=354, file=/dev/ram0, node=-1
polled=0, fixedbufs=1/0, register_files=1, buffered=0, QD=128
Engine=io_uring, sq_ring=128, cq_ring=128
IOPS=3.37M, BW=13.15GiB/s, IOS/call=32/31
IOPS=3.45M, BW=13.46GiB/s, IOS/call=32/31
IOPS=3.43M, BW=13.42GiB/s, IOS/call=32/32
IOPS=3.43M, BW=13.39GiB/s, IOS/call=32/31
IOPS=3.43M, BW=13.38GiB/s, IOS/call=32/31

or about an 8x in difference. Now that brd is prepared to deal with
REQ_NOWAIT reads/writes, mark it as supporting that.

Cc: stable@vger.kernel.org # 5.10+
Link: https://lore.kernel.org/linux-block/20230203103005.31290-1-p.raghav@samsung.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
brd: check for REQ_NOWAIT and set correct page allocation mask 2023-02-16T17:02:41+00:00 Jens Axboe axboe@kernel.dk 2023-02-16T15:01:08+00:00 6ded703c56c21bfb259725d4f1831a5feb563e9b If REQ_NOWAIT is set, then do a non-blocking allocation if the operation is a write and we need to insert a new page. Currently REQ_NOWAIT cannot be set as the queue isn't marked as supporting nowait, this change is in preparation for allowing that. radix_tree_preload() warns on attempting to call it with an allocation mask that doesn't allow blocking. While that warning could arguably be removed, we need to handle radix insertion failures anyway as they are more likely if we cannot block to get memory. Remove legacy BUG_ON()'s and turn them into proper errors instead, one for the allocation failure and one for finding a page that doesn't match the correct index. Cc: stable@vger.kernel.org # 5.10+ Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> 
If REQ_NOWAIT is set, then do a non-blocking allocation if the operation
is a write and we need to insert a new page. Currently REQ_NOWAIT cannot
be set as the queue isn't marked as supporting nowait, this change is in
preparation for allowing that.

radix_tree_preload() warns on attempting to call it with an allocation
mask that doesn't allow blocking. While that warning could arguably
be removed, we need to handle radix insertion failures anyway as they
are more likely if we cannot block to get memory.

Remove legacy BUG_ON()'s and turn them into proper errors instead, one
for the allocation failure and one for finding a page that doesn't
match the correct index.

Cc: stable@vger.kernel.org # 5.10+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
brd: return 0/-error from brd_insert_page() 2023-02-16T17:02:31+00:00 Jens Axboe axboe@kernel.dk 2023-02-16T14:57:32+00:00 db0ccc44a20b4bb3039c0f6885a1f9c3323c7673 It currently returns a page, but callers just check for NULL/page to gauge success. Clean this up and return the appropriate error directly instead. Cc: stable@vger.kernel.org # 5.10+ Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> 
It currently returns a page, but callers just check for NULL/page to
gauge success. Clean this up and return the appropriate error directly
instead.

Cc: stable@vger.kernel.org # 5.10+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
block: remove ->rw_page 2023-02-03T06:33:34+00:00 Christoph Hellwig hch@lst.de 2023-01-25T13:34:36+00:00 3222d8c2a7f888bf38b845b125e9470b12108a4d The ->rw_page method is a special purpose bypass of the usual bio handling path that is limited to single-page reads and writes and synchronous which causes a lot of extra code in the drivers, callers and the block layer. The only remaining user is the MM swap code. Switch that swap code to simply submit a single-vec on-stack bio an synchronously wait on it based on a newly added QUEUE_FLAG_SYNCHRONOUS flag set by the drivers that currently implement ->rw_page instead. While this touches one extra cache line and executes extra code, it simplifies the block layer and drivers and ensures that all feastures are properly supported by all drivers, e.g. right now ->rw_page bypassed cgroup writeback entirely. [akpm@linux-foundation.org: fix comment typo, per Dan] Link: https://lkml.kernel.org/r/20230125133436.447864-8-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Keith Busch <kbusch@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> 
The ->rw_page method is a special purpose bypass of the usual bio handling
path that is limited to single-page reads and writes and synchronous which
causes a lot of extra code in the drivers, callers and the block layer.

The only remaining user is the MM swap code.  Switch that swap code to
simply submit a single-vec on-stack bio an synchronously wait on it based
on a newly added QUEUE_FLAG_SYNCHRONOUS flag set by the drivers that
currently implement ->rw_page instead.  While this touches one extra cache
line and executes extra code, it simplifies the block layer and drivers
and ensures that all feastures are properly supported by all drivers, e.g.
right now ->rw_page bypassed cgroup writeback entirely.

[akpm@linux-foundation.org: fix comment typo, per Dan]
Link: https://lkml.kernel.org/r/20230125133436.447864-8-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
block: move from strlcpy with unused retval to strscpy 2022-09-22T01:45:04+00:00 Wolfram Sang wsa+renesas@sang-engineering.com 2022-08-18T20:59:57+00:00 e55e1b4831563e5766f88fa821f5bfac0d6c298c Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Acked-by: Geoff Levand <geoff@infradead.org> Link: https://lore.kernel.org/r/20220818205958.6552-1-wsa+renesas@sang-engineering.com Signed-off-by: Jens Axboe <axboe@kernel.dk> 
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.

Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Acked-by: Geoff Levand <geoff@infradead.org>
Link: https://lore.kernel.org/r/20220818205958.6552-1-wsa+renesas@sang-engineering.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
block/brd: Use the enum req_op type 2022-07-14T18:14:31+00:00 Bart Van Assche bvanassche@acm.org 2022-07-14T18:06:38+00:00 ba91fd01aad28b2290a00518c4cd6eb728b4f06f Improve static type checking by using the enum req_op type for a function argument that represents a request operation. Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20220714180729.1065367-13-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk> 
Improve static type checking by using the enum req_op type for a
function argument that represents a request operation.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-13-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
block: Change the type of the last .rw_page() argument 2022-07-14T18:14:30+00:00 Bart Van Assche bvanassche@acm.org 2022-07-14T18:06:29+00:00 86947df3a9236481276e8baadde50a403b02b4d4 All .rw_page() callers pass an enum req_op value as last argument. Make this explicit by changing the type of the last argument into enum req_op. See also commit 3f289dcb4b26 ("block: make bdev_ops->rw_page() take a REQ_OP instead of bool"). Cc: Tejun Heo <tj@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20220714180729.1065367-4-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk> 
All .rw_page() callers pass an enum req_op value as last argument. Make
this explicit by changing the type of the last argument into enum req_op.
See also commit 3f289dcb4b26 ("block: make bdev_ops->rw_page() take a
REQ_OP instead of bool").

Cc: Tejun Heo <tj@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-4-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
block: remove blk_cleanup_disk 2022-06-28T12:33:15+00:00 Christoph Hellwig hch@lst.de 2022-06-19T06:05:52+00:00 8b9ab62662048a3274361c7e5f64037c2c133e2c blk_cleanup_disk is nothing but a trivial wrapper for put_disk now, so remove it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20220619060552.1850436-7-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk> 
blk_cleanup_disk is nothing but a trivial wrapper for put_disk now,
so remove it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20220619060552.1850436-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>