linux-toradex.git/drivers/block/loop.c, branch v3.4.73

loop: fix crash if blk_alloc_queue fails

2013-12-04T18:50:28+00:00

commit 3ec981e30fae1f3c8728a05c730acaa1f627bcfb upstream.

loop: fix crash if blk_alloc_queue fails

If blk_alloc_queue fails, loop_add cleans up, but it doesn't clean up the
identifier allocated with idr_alloc. That causes crash on module unload in
idr_for_each(&loop_index_idr, &loop_exit_cb, NULL); where we attempt to
remove non-existed device with that id.

BUG: unable to handle kernel NULL pointer dereference at 0000000000000380
IP: [] del_gendisk+0x19/0x2d0
PGD 43d399067 PUD 43d0ad067 PMD 0
Oops: 0000 [#1] PREEMPT SMP
Modules linked in: loop(-) dm_snapshot dm_zero dm_mirror dm_region_hash dm_log dm_loop dm_mod ip6table_filter ip6_tables uvesafb cfbcopyarea cfbimgblt cfbfillrect fbcon font bitblit fbcon_rotate fbcon_cw fbcon_ud fbcon_ccw softcursor fb fbdev msr ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_conntrack_ipv4 nf_defrag_ipv4 xt_state ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp llc tun ipv6 cpufreq_userspace cpufreq_stats cpufreq_ondemand cpufreq_conservative cpufreq_powersave spadfs fuse hid_generic usbhid hid raid0 md_mod dmi_sysfs nf_nat_ftp nf_nat nf_conntrack_ftp nf_conntrack snd_usb_audio snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_page_alloc lm85 hwmon_vid snd_hwdep snd_usbmidi_lib snd_rawmidi snd soundcore acpi_cpufreq ohci_hcd freq_table tg3 ehci_pci mperf ehci_hcd kvm_amd kvm sata_svw serverworks libphy libata ide_core k10temp usbcore hwmon microcode ptp pcspkr pps_core e100 skge mii usb_common i2c_piix4 floppy evdev rtc_cmos i2c_core processor but!
 ton unix
CPU: 7 PID: 2735 Comm: rmmod Tainted: G        W    3.10.15-devel #15
Hardware name: empty empty/S3992-E, BIOS 'V1.06   ' 06/09/2009
task: ffff88043d38e780 ti: ffff88043d21e000 task.ti: ffff88043d21e000
RIP: 0010:[]  [] del_gendisk+0x19/0x2d0
RSP: 0018:ffff88043d21fe10  EFLAGS: 00010282
RAX: ffffffffa05102e0 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff88043ea82800 RDI: 0000000000000000
RBP: ffff88043d21fe48 R08: 0000000000000000 R09: 0000000000000001
R10: 0000000000000001 R11: 0000000000000000 R12: 00000000000000ff
R13: 0000000000000080 R14: 0000000000000000 R15: ffff88043ea82800
FS:  00007ff646534700(0000) GS:ffff880447000000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000380 CR3: 000000043e9bf000 CR4: 00000000000007e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Stack:
 ffffffff8100aba4 0000000000000092 ffff88043d21fe48 ffff88043ea82800
 00000000000000ff ffff88043d21fe98 0000000000000000 ffff88043d21fe60
 ffffffffa05102b4 0000000000000000 ffff88043d21fe70 ffffffffa05102ec
Call Trace:
 [] ? native_sched_clock+0x24/0x80
 [] loop_remove+0x14/0x40 [loop]
 [] loop_exit_cb+0xc/0x10 [loop]
 [] idr_for_each+0x104/0x190
 [] ? loop_remove+0x40/0x40 [loop]
 [] ? trace_hardirqs_on_caller+0x105/0x1d0
 [] loop_exit+0x34/0xa58 [loop]
 [] SyS_delete_module+0x13a/0x260
 [] ? trace_hardirqs_on_thunk+0x3a/0x3f
 [] system_call_fastpath+0x1a/0x1f
Code: f0 4c 8b 6d f8 c9 c3 66 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 41 56 41 55 4c 8d af 80 00 00 00 41 54 53 48 89 fb 48 83 ec 18 <48> 83 bf 80 03 00
00 00 74 4d e8 98 fe ff ff 31 f6 48 c7 c7 20
RIP  [] del_gendisk+0x19/0x2d0
 RSP 
CR2: 0000000000000380
---[ end trace 64ec069ec70f1309 ]---

Signed-off-by: Mikulas Patocka 
Acked-by: Tejun Heo 
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

block: fix a probe argument to blk_register_region

2013-11-29T18:50:36+00:00

commit a207f5937630dd35bd2550620bef416937a1365e upstream.

The probe function is supposed to return NULL on failure (as we can see in
kobj_lookup: kobj = probe(dev, index, data); ... if (kobj) return kobj;

However, in loop and brd, it returns negative error from ERR_PTR.

This causes a crash if we simulate disk allocation failure and run
less -f /dev/loop0 because the negative number is interpreted as a pointer:

BUG: unable to handle kernel NULL pointer dereference at 00000000000002b4
IP: [] __blkdev_get+0x28/0x450
PGD 23c677067 PUD 23d6d1067 PMD 0
Oops: 0000 [#1] PREEMPT SMP
Modules linked in: loop hpfs nvidia(PO) ip6table_filter ip6_tables uvesafb cfbcopyarea cfbimgblt cfbfillrect fbcon font bitblit fbcon_rotate fbcon_cw fbcon_ud fbcon_ccw softcursor fb fbdev msr ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_conntrack_ipv4 nf_defrag_ipv4 xt_state ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp llc tun ipv6 cpufreq_stats cpufreq_ondemand cpufreq_userspace cpufreq_powersave cpufreq_conservative hid_generic spadfs usbhid hid fuse raid0 snd_usb_audio snd_pcm_oss snd_mixer_oss md_mod snd_pcm snd_timer snd_page_alloc snd_hwdep snd_usbmidi_lib dmi_sysfs snd_rawmidi nf_nat_ftp nf_nat nf_conntrack_ftp nf_conntrack snd soundcore lm85 hwmon_vid ohci_hcd ehci_pci ehci_hcd serverworks sata_svw libata acpi_cpufreq freq_table mperf ide_core usbcore kvm_amd kvm tg3 i2c_piix4 libphy microcode e100 usb_common ptp skge i2c_core pcspkr k10temp evdev floppy hwmon pps_core mii rtc_cmos button processor unix [last unloaded: nvidia]
CPU: 1 PID: 6831 Comm: less Tainted: P        W  O 3.10.15-devel #18
Hardware name: empty empty/S3992-E, BIOS 'V1.06   ' 06/09/2009
task: ffff880203cc6bc0 ti: ffff88023e47c000 task.ti: ffff88023e47c000
RIP: 0010:[]  [] __blkdev_get+0x28/0x450
RSP: 0018:ffff88023e47dbd8  EFLAGS: 00010286
RAX: ffffffffffffff74 RBX: ffffffffffffff74 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000001
RBP: ffff88023e47dc18 R08: 0000000000000002 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff88023f519658
R13: ffffffff8118c300 R14: 0000000000000000 R15: ffff88023f519640
FS:  00007f2070bf7700(0000) GS:ffff880247400000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000002b4 CR3: 000000023da1d000 CR4: 00000000000007e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Stack:
 0000000000000002 0000001d00000000 000000003e47dc50 ffff88023f519640
 ffff88043d5bb668 ffffffff8118c300 ffff88023d683550 ffff88023e47de60
 ffff88023e47dc98 ffffffff8118c10d 0000001d81605698 0000000000000292
Call Trace:
 [] ? blkdev_get_by_dev+0x60/0x60
 [] blkdev_get+0x1dd/0x370
 [] ? blkdev_get_by_dev+0x60/0x60
 [] ? _raw_spin_unlock+0x2c/0x50
 [] ? blkdev_get_by_dev+0x60/0x60
 [] blkdev_open+0x65/0x80
 [] do_dentry_open.isra.18+0x23e/0x2f0
 [] finish_open+0x34/0x50
 [] do_last.isra.62+0x2d2/0xc50
 [] path_openat.isra.63+0xb8/0x4d0
 [] ? might_fault+0x4e/0xa0
 [] do_filp_open+0x40/0x90
 [] ? _raw_spin_unlock+0x2c/0x50
 [] ? __alloc_fd+0xa5/0x1f0
 [] do_sys_open+0xef/0x1d0
 [] SyS_open+0x19/0x20
 [] system_call_fastpath+0x1a/0x1f
Code: 44 00 00 55 48 89 e5 41 57 49 89 ff 41 56 41 89 d6 41 55 41 54 4c 8d 67 18 53 48 83 ec 18 89 75 cc e9 f2 00 00 00 0f 1f 44 00 00 <48> 8b 80 40 03 00 00 48 89 df 4c 8b 68 58 e8 d5
a4 07 00 44 89
RIP  [] __blkdev_get+0x28/0x450
 RSP 
CR2: 00000000000002b4
---[ end trace bb7f32dbf02398dc ]---

The brd change should be backported to stable kernels starting with 2.6.25.
The loop change should be backported to stable kernels starting with 2.6.22.

Signed-off-by: Mikulas Patocka 
Acked-by: Tejun Heo 
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

loop: prevent bdev freeing while device in use

2013-04-05T17:04:35+00:00

commit c1681bf8a7b1b98edee8b862a42c19c4e53205fd upstream.

struct block_device lifecycle is defined by its inode (see fs/block_dev.c) -
block_device allocated first time we access /dev/loopXX and deallocated on
bdev_destroy_inode. When we create the device "losetup /dev/loopXX afile"
we want that block_device stay alive until we destroy the loop device
with "losetup -d".

But because we do not hold /dev/loopXX inode its counter goes 0, and
inode/bdev can be destroyed at any moment. Usually it happens at memory
pressure or when user drops inode cache (like in the test below). When later in
loop_clr_fd() we want to use bdev we have use-after-free error with following
stack:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000280
  bd_set_size+0x10/0xa0
  loop_clr_fd+0x1f8/0x420 [loop]
  lo_ioctl+0x200/0x7e0 [loop]
  lo_compat_ioctl+0x47/0xe0 [loop]
  compat_blkdev_ioctl+0x341/0x1290
  do_filp_open+0x42/0xa0
  compat_sys_ioctl+0xc1/0xf20
  do_sys_open+0x16e/0x1d0
  sysenter_dispatch+0x7/0x1a

To prevent use-after-free we need to grab the device in loop_set_fd()
and put it later in loop_clr_fd().

The issue is reprodusible on current Linus head and v3.3. Here is the test:

  dd if=/dev/zero of=loop.file bs=1M count=1
  while [ true ]; do
    losetup /dev/loop0 loop.file
    echo 2 > /proc/sys/vm/drop_caches
    losetup -d /dev/loop0
  done

[ Doing bdgrab/bput in loop_set_fd/loop_clr_fd is safe, because every
  time we call loop_set_fd() we check that loop_device->lo_state is
  Lo_unbound and set it to Lo_bound If somebody will try to set_fd again
  it will get EBUSY.  And if we try to loop_clr_fd() on unbound loop
  device we'll get ENXIO.

  loop_set_fd/loop_clr_fd (and any other loop ioctl) is called under
  loop_device->lo_ctl_mutex. ]

Signed-off-by: Anatol Pomozov 
Cc: Al Viro 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

loopdev: remove an user triggerable oops

2013-03-20T20:05:01+00:00

commit b1a6650406875b9097a032eed89af50682fe1160 upstream.

When loopdev is built as module and we pass an invalid parameter,
loop_init() will return directly without deregister misc device, which
will cause an oops when insert loop module next time because we left some
garbage in the misc device list.

Test case:
sudo modprobe loop max_part=1024
(failed due to invalid parameter)
sudo modprobe loop
(oops)

Clean up nicely to avoid such oops.

Signed-off-by: Guo Chao 
Cc: Alexander Viro 
Cc: Guo Chao 
Cc: M. Hindess 
Cc: Nikanth Karthikesan 
Cc: Jens Axboe 
Signed-off-by: Andrew Morton 
Signed-off-by: Jens Axboe 
Acked-by: Jeff Mahoney 
Signed-off-by: Greg Kroah-Hartman

loopdev: fix a deadlock

2013-03-20T20:05:01+00:00

commit 5370019dc2d2c2ff90e95d181468071362934f3a upstream.

bd_mutex and lo_ctl_mutex can be held in different order.

Path #1:

blkdev_open
 blkdev_get
  __blkdev_get (hold bd_mutex)
   lo_open (hold lo_ctl_mutex)

Path #2:

blkdev_ioctl
 lo_ioctl (hold lo_ctl_mutex)
  lo_set_capacity (hold bd_mutex)

Lockdep does not report it, because path #2 actually holds a subclass of
lo_ctl_mutex.  This subclass seems creep into the code by mistake.  The
patch author actually just mentioned it in the changelog, see commit
f028f3b2 ("loop: fix circular locking in loop_clr_fd()"), also see:

	http://marc.info/?l=linux-kernel&m=123806169129727&w=2

Path #2 hold bd_mutex to call bd_set_size(), I've protected it
with i_mutex in a previous patch, so drop bd_mutex at this site.

Signed-off-by: Guo Chao 
Cc: Alexander Viro 
Cc: Guo Chao 
Cc: M. Hindess 
Cc: Nikanth Karthikesan 
Cc: Jens Axboe 
Signed-off-by: Andrew Morton 
Signed-off-by: Jens Axboe 
Acked-by: Jeff Mahoney 
Signed-off-by: Greg Kroah-Hartman

block: remove the second argument of k[un]map_atomic()

2012-03-20T13:48:16+00:00

Signed-off-by: Cong Wang

loop: zero fill bio instead of return -EIO for partial read

2012-02-08T21:07:19+00:00

commit 8268f5a741 ("deny partial write for loop dev fd") tried to fix the
loop device partial read information leak problem.  But it changed the
semantics of read behavior.  When we read beyond the end of the device we
should get 0 bytes, which is normal behavior, we should not just return
-EIO

Instead of returning -EIO, zero out the bio to avoid information leak in
case of partail read.

Signed-off-by: Dave Young 
Reviewed-by: Jeff Moyer 
Tested-by: Jeff Moyer 
Cc: Dmitry Monakhov 
Signed-off-by: Andrew Morton 
Signed-off-by: Jens Axboe

fs: move code out of buffer.c

2012-01-04T03:54:07+00:00

Move invalidate_bdev, block_sync_page into fs/block_dev.c.  Export
kill_bdev as well, so brd doesn't have to open code it.  Reduce
buffer_head.h requirement accordingly.

Removed a rather large comment from invalidate_bdev, as it looked a bit
obsolete to bother moving.  The small comment replacing it says enough.

Signed-off-by: Nick Piggin 
Cc: Al Viro 
Cc: Christoph Hellwig 
Signed-off-by: Andrew Morton 
Signed-off-by: Al Viro

loop: Fix discard_alignment default setting

2011-12-02T13:47:03+00:00

discard_alignment is not relevant to the loop driver since it is
supposed to be set as a workaround for the old sector 63 alignments.
So set it to zero rather than block size.

Signed-off-by: Lukas Czerner 
Reported-by: Milan Broz 
Signed-off-by: Jens Axboe

loop: fix loop block driver discard and encryption comment

2011-11-25T08:41:25+00:00

The loop driver does not support discard if encryption is enabled,
fix the comment.

Signed-off-by: Dave Young 
Signed-off-by: Jens Axboe