linux-toradex.git/drivers/block/loop.c, branch v4.9.88

loop: Fix lost writes caused by missing flag

2018-03-18T10:18:50+00:00

commit 1d037577c323e5090ce281e96bc313ab2eee5be2 upstream.

The following commit:

commit aa4d86163e4e ("block: loop: switch to VFS ITER_BVEC")

replaced __do_lo_send_write(), which used ITER_KVEC iterators, with
lo_write_bvec() which uses ITER_BVEC iterators.  In this change, though,
the WRITE flag was lost:

-       iov_iter_kvec(&from, ITER_KVEC | WRITE, &kvec, 1, len);
+       iov_iter_bvec(&i, ITER_BVEC, bvec, 1, bvec->bv_len);

This flag is necessary for the DAX case because we make decisions based on
whether or not the iterator is a READ or a WRITE in dax_iomap_actor() and
in dax_iomap_rw().

We end up going through this path in configurations where we combine a PMEM
device with 4k sectors, a loopback device and DAX.  The consequence of this
missed flag is that what we intend as a write actually turns into a read in
the DAX code, so no data is ever written.

The very simplest test case is to create a loopback device and try and
write a small string to it, then hexdump a few bytes of the device to see
if the write took.  Without this patch you read back all zeros, with this
you read back the string you wrote.

For XFS this causes us to fail or panic during the following xfstests:

	xfs/074 xfs/078 xfs/216 xfs/217 xfs/250

For ext4 we have a similar issue where writes never happen, but we don't
currently have any xfstests that use loopback and show this issue.

Fix this by restoring the WRITE flag argument to iov_iter_bvec().  This
causes the xfstests to all pass.

Cc: Al Viro 
Cc: stable@vger.kernel.org
Fixes: commit aa4d86163e4e ("block: loop: switch to VFS ITER_BVEC")
Reviewed-by: Christoph Hellwig 
Reviewed-by: Ming Lei 
Signed-off-by: Ross Zwisler 
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

loop: fix concurrent lo_open/lo_release

2018-02-03T16:05:33+00:00

commit ae6650163c66a7eff1acd6eb8b0f752dcfa8eba5 upstream.

范龙飞 reports that KASAN can report a use-after-free in __lock_acquire.
The reason is due to insufficient serialization in lo_release(), which
will continue to use the loop device even after it has decremented the
lo_refcnt to zero.

In the meantime, another process can come in, open the loop device
again as it is being shut down. Confusion ensues.

Reported-by: 范龙飞 
Signed-off-by: Linus Torvalds 
Signed-off-by: Jens Axboe 
Cc: Ben Hutchings 
Signed-off-by: Greg Kroah-Hartman

loop: fix LO_FLAGS_PARTSCAN hang

2017-03-12T05:41:45+00:00

commit e02898b423802b1f3a3aaa7f16e896da069ba8f7 upstream.

loop_reread_partitions() needs to do I/O, but we just froze the queue,
so we end up waiting forever. This can easily be reproduced with losetup
-P. Fix it by moving the reread to after we unfreeze the queue.

Fixes: ecdd09597a57 ("block/loop: fix race between I/O and set_status")
Reported-by: Tejun Heo 
Signed-off-by: Omar Sandoval 
Reviewed-by: Ming Lei 
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

block/loop: fix race between I/O and set_status

2017-03-12T05:41:45+00:00

commit ecdd09597a57251323b0de50e3d45e69298c4a83 upstream.

Inside set_status, transfer need to setup again, so
we have to drain IO before the transition, otherwise
oops may be triggered like the following:

	divide error: 0000 [#1] SMP KASAN
	CPU: 0 PID: 2935 Comm: loop7 Not tainted 4.10.0-rc7+ #213
	Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs
	01/01/2011
	task: ffff88006ba1e840 task.stack: ffff880067338000
	RIP: 0010:transfer_xor+0x1d1/0x440 drivers/block/loop.c:110
	RSP: 0018:ffff88006733f108 EFLAGS: 00010246
	RAX: 0000000000000000 RBX: ffff8800688d7000 RCX: 0000000000000059
	RDX: 0000000000000000 RSI: 1ffff1000d743f43 RDI: ffff880068891c08
	RBP: ffff88006733f160 R08: ffff8800688d7001 R09: 0000000000000000
	R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800688d7000
	R13: ffff880067b7d000 R14: dffffc0000000000 R15: 0000000000000000
	FS:  0000000000000000(0000) GS:ffff88006d000000(0000)
	knlGS:0000000000000000
	CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
	CR2: 00000000006c17e0 CR3: 0000000066e3b000 CR4: 00000000001406f0
	Call Trace:
	 lo_do_transfer drivers/block/loop.c:251 [inline]
	 lo_read_transfer drivers/block/loop.c:392 [inline]
	 do_req_filebacked drivers/block/loop.c:541 [inline]
	 loop_handle_cmd drivers/block/loop.c:1677 [inline]
	 loop_queue_work+0xda0/0x49b0 drivers/block/loop.c:1689
	 kthread_worker_fn+0x4c3/0xa30 kernel/kthread.c:630
	 kthread+0x326/0x3f0 kernel/kthread.c:227
	 ret_from_fork+0x31/0x40 arch/x86/entry/entry_64.S:430
	Code: 03 83 e2 07 41 29 df 42 0f b6 04 30 4d 8d 44 24 01 38 d0 7f 08
	84 c0 0f 85 62 02 00 00 44 89 f8 41 0f b6 48 ff 25 ff 01 00 00 99 
	7d c8 48 63 d2 48 03 55 d0 48 89 d0 48 89 d7 48 c1 e8 03 83
	RIP: transfer_xor+0x1d1/0x440 drivers/block/loop.c:110 RSP:
	ffff88006733f108
	---[ end trace 0166f7bd3b0c0933 ]---

Reported-by: Dmitry Vyukov 
Signed-off-by: Ming Lei 
Tested-by: Dmitry Vyukov 
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

loop: return proper error from loop_queue_rq()

2017-01-06T09:40:14+00:00

commit b4a567e8114327518c09f5632339a5954ab975a3 upstream.

->queue_rq() should return one of the BLK_MQ_RQ_QUEUE_* constants, not
an errno.

Fixes: f4aa4c7bbac6 ("block: loop: convert to per-device workqueue")
Signed-off-by: Omar Sandoval 
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

kthread: kthread worker API cleanup

2016-10-11T22:06:33+00:00

A good practice is to prefix the names of functions by the name
of the subsystem.

The kthread worker API is a mix of classic kthreads and workqueues.  Each
worker has a dedicated kthread.  It runs a generic function that process
queued works.  It is implemented as part of the kthread subsystem.

This patch renames the existing kthread worker API to use
the corresponding name from the workqueues API prefixed by
kthread_:

__init_kthread_worker()		-> __kthread_init_worker()
init_kthread_worker()		-> kthread_init_worker()
init_kthread_work()		-> kthread_init_work()
insert_kthread_work()		-> kthread_insert_work()
queue_kthread_work()		-> kthread_queue_work()
flush_kthread_work()		-> kthread_flush_work()
flush_kthread_worker()		-> kthread_flush_worker()

Note that the names of DEFINE_KTHREAD_WORK*() macros stay
as they are. It is common that the "DEFINE_" prefix has
precedence over the subsystem names.

Note that INIT() macros and init() functions use different
naming scheme. There is no good solution. There are several
reasons for this solution:

  + "init" in the function names stands for the verb "initialize"
    aka "initialize worker". While "INIT" in the macro names
    stands for the noun "INITIALIZER" aka "worker initializer".

  + INIT() macros are used only in DEFINE() macros

  + init() functions are used close to the other kthread()
    functions. It looks much better if all the functions
    use the same scheme.

  + There will be also kthread_destroy_worker() that will
    be used close to kthread_cancel_work(). It is related
    to the init() function. Again it looks better if all
    functions use the same naming scheme.

  + there are several precedents for such init() function
    names, e.g. amd_iommu_init_device(), free_area_init_node(),
    jump_label_init_type(),  regmap_init_mmio_clk(),

  + It is not an argument but it was inconsistent even before.

[arnd@arndb.de: fix linux-next merge conflict]
 Link: http://lkml.kernel.org/r/20160908135724.1311726-1-arnd@arndb.de
Link: http://lkml.kernel.org/r/1470754545-17632-3-git-send-email-pmladek@suse.com
Suggested-by: Andrew Morton 
Signed-off-by: Petr Mladek 
Cc: Oleg Nesterov 
Cc: Tejun Heo 
Cc: Ingo Molnar 
Cc: Peter Zijlstra 
Cc: Steven Rostedt 
Cc: "Paul E. McKenney" 
Cc: Josh Triplett 
Cc: Thomas Gleixner 
Cc: Jiri Kosina 
Cc: Borislav Petkov 
Cc: Michal Hocko 
Cc: Vlastimil Babka 
Signed-off-by: Arnd Bergmann 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

blk-mq: remove ->map_queue

2016-09-15T14:42:03+00:00

All drivers use the default, so provide an inline version of it.  If we
ever need other queue mapping we can add an optional method back,
although supporting will also require major changes to the queue setup
code.

This provides better code generation, and better debugability as well.

Signed-off-by: Christoph Hellwig 
Reviewed-by: Keith Busch 
Signed-off-by: Jens Axboe

loop: make do_req_filebacked more robust

2016-08-04T20:19:16+00:00

Use a switch statement to iterate over the possible operations and
error out if it's an incorrect one.

Signed-off-by: Jens Axboe

loop: don't try to use AIO for discards

2016-08-04T20:19:16+00:00

Fix a fat-fingered conversion to the req_op accessors, and also
use a switch statement to make it more obvious what is being checked.

Signed-off-by: Christoph Hellwig 
Reported-by: Dave Chinner 
Fixes: c2df40 ("drivers: use req op accessor");
Reviewed-by: Ming Lei 
Signed-off-by: Jens Axboe

loop: Make user notify for adding loop device failed

2016-07-12T23:17:18+00:00

There is no error number returned if loop driver fails in function
alloc_disk to add new loop device. Add a correct error number to make
user notify in this case.

Signed-off-by: Minfei Huang 
Reviewed-by: Ming Lei 
Reviewed-by: Jeff Moyer 
Signed-off-by: Jens Axboe