linux-toradex.git/drivers/block/mg_disk.c, branch v3.10.2

Merge branch 'for-3.10/drivers' of git://git.kernel.dk/linux-block

2013-05-08T18:51:05+00:00

Pull block driver updates from Jens Axboe:
 "It might look big in volume, but when categorized, not a lot of
  drivers are touched.  The pull request contains:

   - mtip32xx fixes from Micron.

   - A slew of drbd updates, this time in a nicer series.

   - bcache, a flash/ssd caching framework from Kent.

   - Fixes for cciss"

* 'for-3.10/drivers' of git://git.kernel.dk/linux-block: (66 commits)
  bcache: Use bd_link_disk_holder()
  bcache: Allocator cleanup/fixes
  cciss: bug fix to prevent cciss from loading in kdump crash kernel
  cciss: add cciss_allow_hpsa module parameter
  drivers/block/mg_disk.c: add CONFIG_PM_SLEEP to suspend/resume functions
  mtip32xx: Workaround for unaligned writes
  bcache: Make sure blocksize isn't smaller than device blocksize
  bcache: Fix merge_bvec_fn usage for when it modifies the bvm
  bcache: Correctly check against BIO_MAX_PAGES
  bcache: Hack around stuff that clones up to bi_max_vecs
  bcache: Set ra_pages based on backing device's ra_pages
  bcache: Take data offset from the bdev superblock.
  mtip32xx: mtip32xx: Disable TRIM support
  mtip32xx: fix a smatch warning
  bcache: Disable broken btree fuzz tester
  bcache: Fix a format string overflow
  bcache: Fix a minor memory leak on device teardown
  bcache: Documentation updates
  bcache: Use WARN_ONCE() instead of __WARN()
  bcache: Add missing #include 
  ...

drivers/block/mg_disk.c: add CONFIG_PM_SLEEP to suspend/resume functions

2013-04-29T19:24:02+00:00

Add CONFIG_PM_SLEEP to suspend/resume functions to fix the following build
warning when CONFIG_PM_SLEEP is not selected.  This is because sleep PM
callbacks defined by SIMPLE_DEV_PM_OPS are only used when the
CONFIG_PM_SLEEP is enabled.

drivers/block/mg_disk.c:783:12: warning: 'mg_suspend' defined but not used [-Wunused-function]
drivers/block/mg_disk.c:807:12: warning: 'mg_resume' defined but not used [-Wunused-function]

Signed-off-by: Jingoo Han 
Cc: Jens Axboe 
Cc: "Rafael J. Wysocki" 
Signed-off-by: Andrew Morton 
Signed-off-by: Jens Axboe

mg_disk: fix error return code in mg_probe()

2013-03-28T15:43:43+00:00

Fix to return a negative error code from the error handling
case instead of 0, as returned elsewhere in this function.

Signed-off-by: Wei Yongjun 
Reviewed-by: Jingoo Han 
Signed-off-by: Jens Axboe

mg_disk: Use struct dev_pm_ops for power management

2012-07-06T17:07:00+00:00

Make the mg_disk driver define its PM callbacks through
a struct dev_pm_ops object rather than by using legacy PM hooks
in struct platform_driver.

Signed-off-by: Rafael J. Wysocki

block: switch s390 tape_block and mg_disk to elevator_change()

2010-08-23T12:02:44+00:00

Now that we have this API, switch the two in-kernel users to it.
Resolves an oops introduced by commit
1abec4fdbb142e3ccb6ce99832fae42129134a96.

Signed-off-by: Jens Axboe

block: remove wrappers for request type/flags

2010-08-07T16:17:56+00:00

Remove all the trivial wrappers for the cmd_type and cmd_flags fields in
struct requests.  This allows much easier grepping for different request
types instead of unwinding through macros.

Signed-off-by: Christoph Hellwig 
Signed-off-by: Jens Axboe

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

2010-03-30T13:02:32+00:00

percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo 
Guess-its-ok-by: Christoph Lameter 
Cc: Ingo Molnar 
Cc: Lee Schermerhorn

block: Rename blk_queue_max_sectors to blk_queue_max_hw_sectors

2010-02-26T12:58:08+00:00

The block layer calling convention is blk_queue_.
blk_queue_max_sectors predates this practice, leading to some confusion.
Rename the function to appropriately reflect that its intended use is to
set max_hw_sectors.

Also introduce a temporary wrapper for backwards compability.  This can
be removed after the merge window is closed.

Signed-off-by: Martin K. Petersen 
Signed-off-by: Jens Axboe

drivers/block/mg_disk.c: use resource_size()

2009-12-22T08:12:48+00:00

Use resource_size() for ioremap.

The ioremap appears to be passing the incorrect size for the platform
resource.  Unfortunately, I can't locate a user in mainline to verify
this.  Using resource_size should be the correct fix.

Signed-off-by: H Hartley Sweeten 
Acked-by: unsik Kim 
Signed-off-by: Andrew Morton 
Signed-off-by: Jens Axboe

const: make block_device_operations const

2009-09-22T14:17:25+00:00

Signed-off-by: Alexey Dobriyan 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds