linux-toradex.git/drivers/block/sx8.c, branch v3.14.2

drivers/block/sx8.c: remove unnecessary pci_set_drvdata()

2014-01-22T04:16:56+00:00

The driver core clears the driver data to NULL after device_release or on
probe failure.  Thus, it is not needed to manually clear the device driver
data to NULL.

Signed-off-by: Jingoo Han 
Cc: Jens Axboe 
Signed-off-by: Andrew Morton 
Signed-off-by: Jens Axboe

drivers/block/sx8.c: use module_pci_driver()

2014-01-22T04:16:56+00:00

Use module_pci_driver() macro which makes the code smaller and simpler.

Signed-off-by: Jingoo Han 
Cc: Jens Axboe 
Signed-off-by: Andrew Morton 
Signed-off-by: Jens Axboe

block, sx8: fix pointer math issue getting fw version

2012-03-03T18:44:39+00:00

"mem" is type u8.  We need parenthesis here or it screws up the pointer
math probably leading to an oops.

Signed-off-by: Dan Carpenter 
Cc: stable@kernel.org
Acked-by: Jeff Garzik 
Signed-off-by: Jens Axboe

block, sx8: kill blk_insert_request()

2011-12-13T23:33:37+00:00

The only user left for blk_insert_request() is sx8 and it can be
trivially switched to use blk_execute_rq_nowait() - special requests
aren't included in io stat and sx8 doesn't use block layer tagging.
Switch sx8 and kill blk_insert_requeset().

This patch doesn't introduce any functional difference.

Only compile tested.

Signed-off-by: Tejun Heo 
Acked-by: Jeff Garzik 
Signed-off-by: Jens Axboe

block: Consolidate phys_segment and hw_segment limits

2010-02-26T12:58:08+00:00

Except for SCSI no device drivers distinguish between physical and
hardware segment limits.  Consolidate the two into a single segment
limit.

Signed-off-by: Martin K. Petersen 
Signed-off-by: Jens Axboe

block: make PCI device id constant

2010-01-11T13:31:26+00:00

The id_table field of the struct pci_driver is constant in 
so it is worth to make the initialization data also constant.

The semantic match that finds this kind of pattern is as follows:
(http://coccinelle.lip6.fr/)

// 
@r@
disable decl_init,const_decl_init;
identifier I1, I2, x;
@@
	struct I1 {
	  ...
	  const struct I2 *x;
	  ...
	};
@s@
identifier r.I1, y;
identifier r.x, E;
@@
	struct I1 y = {
	  .x = E,
	};
@c@
identifier r.I2;
identifier s.E;
@@
	const struct I2 E[] = ... ;
@depends on !c@
identifier r.I2;
identifier s.E;
@@
+	const
	struct I2 E[] = ...;
// 

Signed-off-by: Márton Németh 
Cc: Julia Lawall 
Cc: cocci@diku.dk
Signed-off-by: Jens Axboe

const: make block_device_operations const

2009-09-22T14:17:25+00:00

Signed-off-by: Alexey Dobriyan 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

block: use printk_once

2009-09-11T12:34:33+00:00

Signed-off-by: Marcin Slusarz 
Cc: Jens Axboe 
Cc: Tim Waugh 
Signed-off-by: Jens Axboe

block: implement and enforce request peek/start/fetch

2009-05-11T07:52:18+00:00

Till now block layer allowed two separate modes of request execution.
A request is always acquired from the request queue via
elv_next_request().  After that, drivers are free to either dequeue it
or process it without dequeueing.  Dequeue allows elv_next_request()
to return the next request so that multiple requests can be in flight.

Executing requests without dequeueing has its merits mostly in
allowing drivers for simpler devices which can't do sg to deal with
segments only without considering request boundary.  However, the
benefit this brings is dubious and declining while the cost of the API
ambiguity is increasing.  Segment based drivers are usually for very
old or limited devices and as converting to dequeueing model isn't
difficult, it doesn't justify the API overhead it puts on block layer
and its more modern users.

Previous patches converted all block low level drivers to dequeueing
model.  This patch completes the API transition by...

* renaming elv_next_request() to blk_peek_request()

* renaming blkdev_dequeue_request() to blk_start_request()

* adding blk_fetch_request() which is combination of peek and start

* disallowing completion of queued (not started) requests

* applying new API to all LLDs

Renamings are for consistency and to break out of tree code so that
it's apparent that out of tree drivers need updating.

[ Impact: block request issue API cleanup, no functional change ]

Signed-off-by: Tejun Heo 
Cc: Rusty Russell 
Cc: James Bottomley 
Cc: Mike Miller 
Cc: unsik Kim 
Cc: Paul Clements 
Cc: Tim Waugh 
Cc: Geert Uytterhoeven 
Cc: David S. Miller 
Cc: Laurent Vivier 
Cc: Jeff Garzik 
Cc: Jeremy Fitzhardinge 
Cc: Grant Likely 
Cc: Adrian McMenamin 
Cc: Stephen Rothwell 
Cc: Bartlomiej Zolnierkiewicz 
Cc: Borislav Petkov 
Cc: Sergei Shtylyov 
Cc: Alex Dubov 
Cc: Pierre Ossman 
Cc: David Woodhouse 
Cc: Markus Lidel 
Cc: Stefan Weinhuber 
Cc: Martin Schwidefsky 
Cc: Pete Zaitcev 
Cc: FUJITA Tomonori 
Signed-off-by: Jens Axboe

block: convert to pos and nr_sectors accessors

2009-05-11T07:50:54+00:00

With recent cleanups, there is no place where low level driver
directly manipulates request fields.  This means that the 'hard'
request fields always equal the !hard fields.  Convert all
rq->sectors, nr_sectors and current_nr_sectors references to
accessors.

While at it, drop superflous blk_rq_pos() < 0 test in swim.c.

[ Impact: use pos and nr_sectors accessors ]

Signed-off-by: Tejun Heo 
Acked-by: Geert Uytterhoeven 
Tested-by: Grant Likely 
Acked-by: Grant Likely 
Tested-by: Adrian McMenamin 
Acked-by: Adrian McMenamin 
Acked-by: Mike Miller 
Cc: James Bottomley 
Cc: Bartlomiej Zolnierkiewicz 
Cc: Borislav Petkov 
Cc: Sergei Shtylyov 
Cc: Eric Moore 
Cc: Alan Stern 
Cc: FUJITA Tomonori 
Cc: Pete Zaitcev 
Cc: Stephen Rothwell 
Cc: Paul Clements 
Cc: Tim Waugh 
Cc: Jeff Garzik 
Cc: Jeremy Fitzhardinge 
Cc: Alex Dubov 
Cc: David Woodhouse 
Cc: Martin Schwidefsky 
Cc: Dario Ballabio 
Cc: David S. Miller 
Cc: Rusty Russell 
Cc: unsik Kim 
Cc: Laurent Vivier 
Signed-off-by: Jens Axboe