linux-toradex.git/drivers/block, branch v4.9.38

xen/blkback: don't free be structure too early

2017-07-05T12:40:20+00:00

commit 71df1d7ccad1c36f7321d6b3b48f2ea42681c363 upstream.

The be structure must not be freed when freeing the blkif structure
isn't done. Otherwise a use-after-free of be when unmapping the ring
used for communicating with the frontend will occur in case of a
late call of xenblk_disconnect() (e.g. due to an I/O still active
when trying to disconnect).

Signed-off-by: Juergen Gross 
Tested-by: Steven Haigh 
Acked-by: Roger Pau Monné 
Signed-off-by: Konrad Rzeszutek Wilk 
Signed-off-by: Greg Kroah-Hartman

xen/blkback: don't use xen_blkif_get() in xen-blkback kthread

2017-07-05T12:40:17+00:00

commit a24fa22ce22ae302b3bf8f7008896d52d5d57b8d upstream.

There is no need to use xen_blkif_get()/xen_blkif_put() in the kthread
of xen-blkback. Thread stopping is synchronous and using the blkif
reference counting in the kthread will avoid to ever let the reference
count drop to zero at the end of an I/O running concurrent to
disconnecting and multiple rings.

Setting ring->xenblkd to NULL after stopping the kthread isn't needed
as the kthread does this already.

Signed-off-by: Juergen Gross 
Tested-by: Steven Haigh 
Acked-by: Roger Pau Monné 
Signed-off-by: Konrad Rzeszutek Wilk 
Signed-off-by: Greg Kroah-Hartman

xen-blkback: don't leak stack data via response ring

2017-06-29T11:00:27+00:00

commit 089bc0143f489bd3a4578bdff5f4ca68fb26f341 upstream.

Rather than constructing a local structure instance on the stack, fill
the fields directly on the shared ring, just like other backends do.
Build on the fact that all response structure flavors are actually
identical (the old code did make this assumption too).

This is XSA-216.

Signed-off-by: Jan Beulich 
Reviewed-by: Konrad Rzeszutek Wilk 
Signed-off-by: Konrad Rzeszutek Wilk 
Signed-off-by: Greg Kroah-Hartman

xen/blkback: fix disconnect while I/Os in flight

2017-06-29T11:00:27+00:00

commit 46464411307746e6297a034a9983a22c9dfc5a0c upstream.

Today disconnecting xen-blkback is broken in case there are still
I/Os in flight: xen_blkif_disconnect() will bail out early without
releasing all resources in the hope it will be called again when
the last request has terminated. This, however, won't happen as
xen_blkif_free() won't be called on termination of the last running
request: xen_blkif_put() won't decrement the blkif refcnt to 0 as
xen_blkif_disconnect() didn't finish before thus some xen_blkif_put()
calls in xen_blkif_disconnect() didn't happen.

To solve this deadlock xen_blkif_disconnect() and
xen_blkif_alloc_rings() shouldn't use xen_blkif_put() and
xen_blkif_get() but use some other way to do their accounting of
resources.

This at once fixes another error in xen_blkif_disconnect(): when it
returned early with -EBUSY for another ring than 0 it would call
xen_blkif_put() again for already handled rings on a subsequent call.
This will lead to inconsistencies in the refcnt handling.

Signed-off-by: Juergen Gross 
Tested-by: Steven Haigh 
Acked-by: Roger Pau Monné 
Signed-off-by: Konrad Rzeszutek Wilk 
Signed-off-by: Greg Kroah-Hartman

nbd: fix 64-bit division

2017-04-21T07:31:23+00:00

commit e88f72cb9f54f6d244e55f629fe5e2f34ca6f9ed upstream.

We have this:

ERROR: "__aeabi_ldivmod" [drivers/block/nbd.ko] undefined!
ERROR: "__divdi3" [drivers/block/nbd.ko] undefined!
nbd.c:(.text+0x247c72): undefined reference to `__divdi3'

due to a recent commit, that did 64-bit division. Use the proper
divider function so that 32-bit compiles don't break.

Fixes: ef77b515243b ("nbd: use loff_t for blocksize and nbd_set_size args")
Signed-off-by: Jens Axboe 
Cc: Ben Hutchings 
Signed-off-by: Greg Kroah-Hartman

nbd: use loff_t for blocksize and nbd_set_size args

2017-04-21T07:31:23+00:00

commit ef77b515243b3499d62cf446eda6ca7e0a0b079c upstream.

If we have large devices (say like the 40t drive I was trying to test with) we
will end up overflowing the int arguments to nbd_set_size and not get the right
size for our device.  Fix this by using loff_t everywhere so I don't have to
think about this again.  Thanks,

Signed-off-by: Josef Bacik 
Signed-off-by: Jens Axboe 
[bwh: Backported to 4.9: adjust context]
Signed-off-by: Ben Hutchings 
Signed-off-by: Greg Kroah-Hartman

zram: do not use copy_page with non-page aligned address

2017-04-21T07:31:22+00:00

commit d72e9a7a93e4f8e9e52491921d99e0c8aa89eb4e upstream.

The copy_page is optimized memcpy for page-alinged address.  If it is
used with non-page aligned address, it can corrupt memory which means
system corruption.  With zram, it can happen with

1. 64K architecture
2. partial IO
3. slub debug

Partial IO need to allocate a page and zram allocates it via kmalloc.
With slub debug, kmalloc(PAGE_SIZE) doesn't return page-size aligned
address.  And finally, copy_page(mem, cmem) corrupts memory.

So, this patch changes it to memcpy.

Actuaully, we don't need to change zram_bvec_write part because zsmalloc
returns page-aligned address in case of PAGE_SIZE class but it's not
good to rely on the internal of zsmalloc.

Note:
 When this patch is merged to stable, clear_page should be fixed, too.
 Unfortunately, recent zram removes it by "same page merge" feature so
 it's hard to backport this patch to -stable tree.

I will handle it when I receive the mail from stable tree maintainer to
merge this patch to backport.

Fixes: 42e99bd ("zram: optimize memory operations with clear_page()/copy_page()")
Link: http://lkml.kernel.org/r/1492042622-12074-2-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim 
Cc: Sergey Senozhatsky 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

loop: fix LO_FLAGS_PARTSCAN hang

2017-03-12T05:41:45+00:00

commit e02898b423802b1f3a3aaa7f16e896da069ba8f7 upstream.

loop_reread_partitions() needs to do I/O, but we just froze the queue,
so we end up waiting forever. This can easily be reproduced with losetup
-P. Fix it by moving the reread to after we unfreeze the queue.

Fixes: ecdd09597a57 ("block/loop: fix race between I/O and set_status")
Reported-by: Tejun Heo 
Signed-off-by: Omar Sandoval 
Reviewed-by: Ming Lei 
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

block/loop: fix race between I/O and set_status

2017-03-12T05:41:45+00:00

commit ecdd09597a57251323b0de50e3d45e69298c4a83 upstream.

Inside set_status, transfer need to setup again, so
we have to drain IO before the transition, otherwise
oops may be triggered like the following:

	divide error: 0000 [#1] SMP KASAN
	CPU: 0 PID: 2935 Comm: loop7 Not tainted 4.10.0-rc7+ #213
	Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs
	01/01/2011
	task: ffff88006ba1e840 task.stack: ffff880067338000
	RIP: 0010:transfer_xor+0x1d1/0x440 drivers/block/loop.c:110
	RSP: 0018:ffff88006733f108 EFLAGS: 00010246
	RAX: 0000000000000000 RBX: ffff8800688d7000 RCX: 0000000000000059
	RDX: 0000000000000000 RSI: 1ffff1000d743f43 RDI: ffff880068891c08
	RBP: ffff88006733f160 R08: ffff8800688d7001 R09: 0000000000000000
	R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800688d7000
	R13: ffff880067b7d000 R14: dffffc0000000000 R15: 0000000000000000
	FS:  0000000000000000(0000) GS:ffff88006d000000(0000)
	knlGS:0000000000000000
	CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
	CR2: 00000000006c17e0 CR3: 0000000066e3b000 CR4: 00000000001406f0
	Call Trace:
	 lo_do_transfer drivers/block/loop.c:251 [inline]
	 lo_read_transfer drivers/block/loop.c:392 [inline]
	 do_req_filebacked drivers/block/loop.c:541 [inline]
	 loop_handle_cmd drivers/block/loop.c:1677 [inline]
	 loop_queue_work+0xda0/0x49b0 drivers/block/loop.c:1689
	 kthread_worker_fn+0x4c3/0xa30 kernel/kthread.c:630
	 kthread+0x326/0x3f0 kernel/kthread.c:227
	 ret_from_fork+0x31/0x40 arch/x86/entry/entry_64.S:430
	Code: 03 83 e2 07 41 29 df 42 0f b6 04 30 4d 8d 44 24 01 38 d0 7f 08
	84 c0 0f 85 62 02 00 00 44 89 f8 41 0f b6 48 ff 25 ff 01 00 00 99 
	7d c8 48 63 d2 48 03 55 d0 48 89 d0 48 89 d7 48 c1 e8 03 83
	RIP: transfer_xor+0x1d1/0x440 drivers/block/loop.c:110 RSP:
	ffff88006733f108
	---[ end trace 0166f7bd3b0c0933 ]---

Reported-by: Dmitry Vyukov 
Signed-off-by: Ming Lei 
Tested-by: Dmitry Vyukov 
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

virtio_blk: avoid DMA to stack for the sense buffer

2017-01-19T19:18:03+00:00

commit a14d749fcebe97ddf6af6db3d1f6ece85c9ddcb9 upstream.

Most users of BLOCK_PC requests allocate the sense buffer on the stack,
so to avoid DMA to the stack copy them to a field in the heap allocated
virtblk_req structure.  Without that any attempt at SCSI passthrough I/O,
including the SG_IO ioctl from userspace will crash the kernel.  Note that
this includes running tools like hdparm even when the host does not have
SCSI passthrough enabled.

Signed-off-by: Christoph Hellwig 
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman