linux-toradex.git/drivers/bluetooth/Kconfig, branch v4.3

Bluetooth: hciuart: Add support QCA chipset for UART

2015-08-10T21:52:20+00:00

QCA61x4 chips have supported sleep feature using In-Band-Sleep commands
to enable sleep feature based on H4 protocol. After sending
patch/nvm configuration is done, IBS mode will be up and running

Signed-off-by: Ben Young Tae Kim 
Signed-off-by: Marcel Holtmann

Bluetooth: btqca: Introduce generic QCA ROME support

2015-08-10T21:52:20+00:00

This is for supporting BT for QCA ROME with vendor specific
HCI commands and initialization on the chip. This will have
USB/UART implementation both, but for now, adding UART vendor
specific commands to patch downloading and set Bluetooth device
address using vendor specific command.

Signed-off-by: Ben Young Tae Kim 
Signed-off-by: Marcel Holtmann

Bluetooth: hci_uart: Add basic support for Intel Lightning Peak devices

2015-07-23T15:10:49+00:00

The Intel Lightning Peak devices do not come with Bluetooth firmware
loaded and thus require a full download of the operational Bluetooth
firmware when the device is attached via the Bluetooth line discipline.

Lightning Peak devices start with a bootloader mode that only accepts
a very limited set of HCI commands. The supported commands are enough
to identify the hardware and select the right firmware to load.

Signed-off-by: Loic Poulain 
Signed-off-by: Marcel Holtmann

Bluetooth: btrtl: Create separate module for Realtek BT driver

2015-05-14T10:04:12+00:00

As already done for btintel and btbcm export setup as separate function
in a vendor-specific module to hold all the Realtek specific commands.

Signed-off-by: Carlo Caione 
Signed-off-by: Marcel Holtmann

Bluetooth: hci_uart: Use generic Intel support for address setting

2015-04-07T16:48:21+00:00

The Bluetooth address setting for Intel devices is provided by a generic
module now. Start using that module instead of relying it being included
in the driver.

Signed-off-by: Marcel Holtmann 
Signed-off-by: Johan Hedberg

Bluetooth: btusb: Use generic Intel support for address support

2015-04-07T16:48:21+00:00

The Bluetooth address handling for Intel devices is provided by a generic
module now. Start using that module instead of relying it being included
in the driver.

Signed-off-by: Marcel Holtmann 
Signed-off-by: Johan Hedberg

Bluetooth: btintel: Introduce generic Intel Bluetooth support

2015-04-07T16:48:21+00:00

The majority of Intel Bluetooth vendor commands are shared between USB
and UART transports. This creates a separate module that eventually
will hold all Intel specific commands, but for now just start with the
commands to change the Bluetooth public address and check for the
default address.

Signed-off-by: Marcel Holtmann 
Signed-off-by: Johan Hedberg

Bluetooth: hci_uart: Add protocol support for Broadcom UART devices

2015-04-07T16:47:12+00:00

This adds the protocol support for Broadcom based UART devices to
enable firmware and patchram download procedure. It is a pretty
straight forward H:4 driver with the exception of actually having
its own setup and address configuration callbacks.

Signed-off-by: Marcel Holtmann 
Signed-off-by: Johan Hedberg

Bluetooth: btusb: Add option for Broadcom protocol support

2015-04-07T16:47:11+00:00

With the generic Broadcom Bluetooth support module, it is possible to
turn support for firmware and patchram download into an optional
feature.

To keep backwards compatibility with previous kernel configurations,
the new option defaults to enabled.

Signed-off-by: Marcel Holtmann 
Signed-off-by: Johan Hedberg

Bluetooth: btbcm: Add support for Broadcom controller setup

2015-04-07T16:47:11+00:00

To unify the controller setup of Broadcom devices between USB and UART
transport, add the patchram download support into the Broadcom module.

Signed-off-by: Marcel Holtmann 
Signed-off-by: Johan Hedberg