linux-toradex.git/drivers/bluetooth/btqca.c, branch v6.2-rc4

Bluetooth: btqca: sequential validation

2022-01-07T07:32:55+00:00

Added Sequential validation support & patch command config

Signed-off-by: Sai Teja Aluvala 
Signed-off-by: Marcel Holtmann

net: Don't include filter.h from net/sock.h

2021-12-29T16:48:14+00:00

sock.h is pretty heavily used (5k objects rebuilt on x86 after
it's touched). We can drop the include of filter.h from it and
add a forward declaration of struct sk_filter instead.
This decreases the number of rebuilt objects when bpf.h
is touched from ~5k to ~1k.

There's a lot of missing includes this was masking. Primarily
in networking tho, this time.

Signed-off-by: Jakub Kicinski 
Signed-off-by: Alexei Starovoitov 
Acked-by: Marc Kleine-Budde 
Acked-by: Florian Fainelli 
Acked-by: Nikolay Aleksandrov 
Acked-by: Stefano Garzarella 
Link: https://lore.kernel.org/bpf/20211229004913.513372-1-kuba@kernel.org

Bluetooth: btqca: Moved extracting rom version info to common place

2021-06-26T05:12:30+00:00

Moved extracting rom version info to common place as this code is
common in all if else ladder in qca_uart_setup.

Signed-off-by: Venkata Lakshmi Narayana Gubba 
Signed-off-by: Marcel Holtmann

Bluetooth: btqca: Add support for firmware image with mbn type for WCN6750

2021-06-26T05:12:29+00:00

1. Added support to download firmware image with mbn type for wcn6750
   as it supports mbn type image.
2. If mbn type image is not present then check for tlv type image.
3. Added debug logs for mbn type image.

Signed-off-by: Venkata Lakshmi Narayana Gubba 
Signed-off-by: Marcel Holtmann

Bluetooth: hci_qca: Add support for QTI Bluetooth chip wcn6750

2021-06-26T05:12:29+00:00

Added regulators,GPIOs and changes required to power on/off wcn6750.
Added support for firmware download for wcn6750.

Changes done in detail:
1. Added regulators and corresponding current values.
2. Added sw_ctrl GPIO pin which is output from BT SoC and indicates
   status of clock supply to BT SoC.
3. Added inline function to check if the SoC type is wcn6750.
4. Modified the function qca_wcn3990_init() to support wcn6750 and
   renamed it to qca_regulator_init().

Signed-off-by: Venkata Lakshmi Narayana Gubba 
Signed-off-by: Marcel Holtmann

Bluetooth: btqca: Don't modify firmware contents in-place

2021-06-26T05:12:28+00:00

struct firmware::data is marked const, and when the firmware is
compressed with xz (default at least with Fedora) it's mapped read-only
which results in a crash:

BUG: unable to handle page fault for address: ffffae57c0ca5047
PGD 100000067 P4D 100000067 PUD 1001ce067 PMD 10165a067 PTE 8000000112bba161
Oops: 0003 [#1] SMP NOPTI
CPU: 3 PID: 204 Comm: kworker/u17:0 Not tainted 5.12.1-test+ #1
Hardware name: Dell Inc. XPS 13 9310/0F7M4C, BIOS 1.2.5 12/10/2020
Workqueue: hci0 hci_power_on [bluetooth]
RIP: 0010:qca_download_firmware+0x27c/0x4e0 [btqca]
Code: 1b 75 04 80 48 0c 01 0f b7 c6 8d 54 02 0c 41 39 d7 0f 8e 62 fe ff ff 48 63 c2 4c 01 e8 0f b7 38 0f b7 70 02 66 83 ff 11 75 d3 <80> 48 0c 80 41 83 fc 03 7e 6e 88 58 0d eb ce 41 0f b6 45 0e 48 8b
RSP: 0018:ffffae57c08dfc68 EFLAGS: 00010246
RAX: ffffae57c0ca503b RBX: 000000000000000e RCX: 0000000000000000
RDX: 0000000000000037 RSI: 0000000000000006 RDI: 0000000000000011
RBP: ffff978d9949e000 R08: ffff978d84ed7540 R09: ffffae57c0ca5000
R10: 000000000010cd00 R11: 0000000000000001 R12: 0000000000000005
R13: ffffae57c0ca5004 R14: ffff978d98ca8680 R15: 00000000000016a9
FS:  0000000000000000(0000) GS:ffff9794ef6c0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffae57c0ca5047 CR3: 0000000113d5a004 CR4: 0000000000770ee0
PKRU: 55555554
Call Trace:
 qca_uart_setup+0x2cb/0x1390 [btqca]
 ? qca_read_soc_version+0x136/0x220 [btqca]
 qca_setup+0x288/0xab0 [hci_uart]
 hci_dev_do_open+0x1f3/0x780 [bluetooth]
 ? try_to_wake_up+0x1c1/0x4f0
 hci_power_on+0x3f/0x200 [bluetooth]
 process_one_work+0x1ec/0x380
 worker_thread+0x53/0x3e0
 ? process_one_work+0x380/0x380
 kthread+0x11b/0x140
 ? kthread_associate_blkcg+0xa0/0xa0
 ret_from_fork+0x1f/0x30
Modules linked in: llc ip_set nf_tables nfnetlink snd_soc_skl_hda_dsp(+) ip6table_filter snd_soc_hdac_hdmi ip6_tables qrtr_mhi iptable_filter snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic s>
 dell_wmi_sysman(+) dell_smbios snd dcdbas mhi vfat videobuf2_vmalloc i2c_i801 videobuf2_memops videobuf2_v4l2 dell_wmi_descriptor fat wmi_bmof soundcore i2c_smbus videobuf2_common libarc4 mei_me mei hid_se>
 i2c_hid_acpi i2c_hid video pinctrl_tigerlake fuse
CR2: ffffae57c0ca5047

This also seems to fix a failure to suspend due to the firmware
download on bootup getting interrupted by the crash:

Bluetooth: hci0: SSR or FW download time out
PM: dpm_run_callback(): acpi_subsys_suspend+0x0/0x60 returns -110
PM: Device serial0-0 failed to suspend: error -110
PM: Some devices failed to suspend, or early wake event detected

Fixes: 83e8196 ("Bluetooth: btqca: Introduce generic QCA ROME support")
Cc: Venkata Lakshmi Narayana Gubba 
Cc: stable@vger.kernel.org
Signed-off-by: Connor Abbott 
Signed-off-by: Marcel Holtmann

Bluetooth: btqca: Enable MSFT extension for Qualcomm WCN399x

2020-12-18T21:33:39+00:00

The following Qualcomm WCN399x Bluetooth controllers support the
Microsoft vendor extension and they are using 0xFD70 for VsMsftOpCode.
-WCN3990
-WCN3991
-WCN3998

< HCI Command: ogf 0x3f, ocf 0x0170, plen 1
  00
> HCI Event: 0x0e plen 18
  01 70 FD 00 00 1F 00 00 00 00 00 00 00 04 4D 53 46 54

The following test step was performed.
- Boot the device with WCN3991 and verify INFO print in dmesg.

Signed-off-by: Miao-chen Chou 
Reviewed-by: Abhishek Pandit-Subedi 
Reviewed-by: Archie Pusaka 
Signed-off-by: Marcel Holtmann

Bluetooth: btqca: Add support to read FW build version for WCN3991 BTSoC

2020-12-18T21:23:50+00:00

Add support to read FW build version from debugfs node.
This info can be read from
/sys/kernel/debug/bluetooth/hci0/firmware_info

Signed-off-by: Venkata Lakshmi Narayana Gubba 
Signed-off-by: Marcel Holtmann

Bluetooth: btqca: Use NVM files based on SoC ID for WCN3991

2020-12-07T14:59:55+00:00

This change will allow to use different NVM file based
on WCN3991 BT SoC ID.Need to use different NVM file based on
fab location for WCN3991 BT SoC.

Signed-off-by: Venkata Lakshmi Narayana Gubba 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Johan Hedberg

Bluetooth: hci_qca: Disable SoC debug logging for WCN3991

2020-06-12T13:17:47+00:00

By default, WCN3991 sent debug packets to HOST via ACL packet
with header 0xDC2E. This logging is not required on commercial
devices. With this patch SoC logging is disabled post fw
download.

Signed-off-by: Balakrishna Godavarthi 
Signed-off-by: Marcel Holtmann